[PATCH v2 0/2] Add driver support for ESWIN eic7700 SoC reset controller

[dongxuyang]

From: Xuyang Dong <dongxuyang@xxxxxxxxxxxxxxxxxx>

Updates:

  dt-bindings: reset: eswin: Documentation for eic7700 SoC
  v1 -> v2:
    1. Clear warnings/errors by using "make dt_binding_check".
    2. Update example, change parent node from sys-crg to reset-controller
       for reset yaml.
    3. Drop the child node and add '#reset-cells' to the parent node.
    4. Drop the description, because sys-crg block is changed to reset-
       controller.
    5. Change hex numbers to decimal numbers going from 0, and drop the
       not needed hardware numbers.

  reset: eswin: Add eic7700 reset driver
  v1 -> v2:
    1. Modify the code according to the suggestions.
    2. Use eswin_reset_assert and eswin_reset_deassert in function
       eswin_reset_reset.
    3. Place RESET_EIC7700 in Kconfig and Makefile in order.
    4. Use dev_err_probe() in probe function.

Xuyang Dong (2):
  dt-bindings: reset: eswin: Documentation for eic7700 SoC
  reset: eswin: Add eic7700 reset driver

 .../bindings/reset/eswin,eic7700-reset.yaml   |  41 +++
 drivers/reset/Kconfig                         |  10 +
 drivers/reset/Makefile                        |   1 +
 drivers/reset/reset-eic7700.c                 | 234 ++++++++++++++++++
 .../dt-bindings/reset/eswin,eic7700-reset.h   |  73 ++++++
 5 files changed, 359 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/eswin,eic7700-reset.yaml
 create mode 100644 drivers/reset/reset-eic7700.c
 create mode 100644 include/dt-bindings/reset/eswin,eic7700-reset.h

--
2.17.1