Re: [PATCH v8 1/6] Documentation: ABI: IIO: add new convdelay documentation

[David Lechner]

On 6/3/25 9:36 AM, Angelo Dureghello wrote:
> From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> 
> Add new IIO "convdelay" documentation.
> 
> The ad7606 implements a phase calibation feature, in nanoseconds.
> Being this a time delay, using the convdelay suffix.
> 
> Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> ---
>  Documentation/ABI/testing/sysfs-bus-iio | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index ef52c427a015cf47bb9847782e13afbee01e9f31..7e59cbd5acb85fd0909c1d56f9d76a84933d418a 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -559,6 +559,30 @@ Description:
>  		- a small discrete set of values like "0 2 4 6 8"
>  		- a range specified as "[min step max]"
>  
> +What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay
> +KernelVersion:	6.16
> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		Delay of start of conversion from common reference point shared
> +		by all channels. Can be writable when used to compensate for
> +		delay variation introduced by external filters feeding a
> +		simultaneous sampling ADC.
> +
> +		E.g., for the ad7606 ADC series, this value is intended as a
> +		configurable time delay in seconds, to correct delay introduced
> +		by an optional external filtering circuit.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay_available
> +KernelVersion:	6.16

Forgot to change these to 6.17?

> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		Available values of convdelay. Maybe expressed as:
> +
> +		- a range specified as "[min step max]"
> +
> +		If shared across all channels, <type>_convdelay_available
> +		is used.
> +
>  What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
>  What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
>  What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
>