Re: [PATCH] dt-bindings: net: dsa: microchip: add bit-banged SMI example

[Corentin GUILLEVIC]

Le mer. 28 mai 2025 à 23:46, Rob Herring (Arm) <robh@xxxxxxxxxx> a écrit :
>
>
> On Wed, 28 May 2025 22:31:51 +0200, Corentin Guillevic wrote:
> > KSZ8863 can be configured using I2C, SPI or Microchip SMI. The latter is
> > similar to MDIO, but uses a different protocol. If the hardware doesn't
> > support this, SMI bit banging can help. This commit adds an device tree
> > example that uses the CONFIG_MDIO_GPIO driver for SMI bit banging.
> >
> > Signed-off-by: Corentin Guillevic <corentin.guillevic@xxxxxxxx>
> > ---
> >  .../bindings/net/dsa/microchip,ksz.yaml       | 57 +++++++++++++++++++
> >  1 file changed, 57 insertions(+)
> >
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
> ./Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml:246:1: [error] missing document start "---" (document-start)
> ./Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml:246:3: [error] syntax error: expected '<document start>', but found '<block sequence start>' (syntax)
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml: ignoring, error parsing file
> Traceback (most recent call last):
>   File "/usr/bin/yamllint", line 33, in <module>
>     sys.exit(load_entry_point('yamllint==1.29.0', 'console_scripts', 'yamllint')())
>              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/lib/python3/dist-packages/yamllint/cli.py", line 228, in run
>     prob_level = show_problems(problems, file, args_format=args.format,
>                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>   File "/usr/lib/python3/dist-packages/yamllint/cli.py", line 113, in show_problems
>     for problem in problems:
>   File "/usr/lib/python3/dist-packages/yamllint/linter.py", line 200, in _run
>     for problem in get_cosmetic_problems(buffer, conf, filepath):
>   File "/usr/lib/python3/dist-packages/yamllint/linter.py", line 137, in get_cosmetic_problems
>     for problem in rule.check(rule_conf,
>   File "/usr/lib/python3/dist-packages/yamllint/rules/indentation.py", line 583, in check
>     yield from _check(conf, token, prev, next, nextnext, context)
>   File "/usr/lib/python3/dist-packages/yamllint/rules/indentation.py", line 344, in _check
>     if expected < 0:
>        ^^^^^^^^^^^^
> TypeError: '<' not supported between instances of 'NoneType' and 'int'
> ./Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml:246:3: but found another document
> make[2]: *** Deleting file 'Documentation/devicetree/bindings/net/dsa/microchip,ksz.example.dts'
> Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml:246:3: but found another document
> make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/net/dsa/microchip,ksz.example.dts] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
> make: *** [Makefile:248: __sub-make] Error 2
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250528203152.628818-1-corentin.guillevic@xxxxxxxx
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>

Sorry,.. I send a fixed one.

Regards,
Corentin