Re: [PATCH v4 01/11] dt-bindings: iio: adc: Add AD4170

[Rob Herring (Arm)]

On Mon, 02 Jun 2025 08:36:24 -0300, Marcelo Schmitt wrote:
> Add device tree documentation for AD4170 and similar sigma-delta ADCs.
> The AD4170 is a 24-bit, multichannel, sigma-delta ADC.
> 
> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
> ---
> Change log v3 -> v4
> - Dropped sensor-node and most of defs.
> - Updated external sensor props to have similar name and type of adi,ad4130 ones.
> - Added constraints to properties related to external bridge sensor excitation.
> 
> Some explanation about the constraints to weigh scale sensor types.
> 
> The predefined ACX1, ACX1 negated, ACX2, and ACX2 negated signals are used to AC
> excite external bridge circuits and are output on GPIO2, GPIO0, GPIO3, and
> GPIO1, respectively. If only two pins are specified for AC excitation, only ACX1
> and ACX2 (GPIO2 and GPIO3) are used. Because of that, if AC excitation is
> specified/requested, then those specific GPIO pins must be used with the bridge.
> Otherwise, the bridge won't get properly excited and we also cannot guarantee to
> avoid short-circuit conditions since the level set to GPIOs to DC excite the
> bridge depends on the GPIO number. See AD4170 datasheet Figure 113 Weigh Scale
> (AC Excitation) for the reference circuit diagram.
> Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ad4170-4.pdf#unique_149_Connect_42_ID10354
> 
>  .../bindings/iio/adc/adi,ad4170.yaml          | 543 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  2 files changed, 550 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4170.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,ad4170.yaml: properties:interrupt-names: 'enum' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']}
	hint: Scalar and array keywords cannot be mixed
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/187e038cb9e7dbe3991149885cb0a4b30376660c.1748829860.git.marcelo.schmitt@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.