Re: [PATCH v4 07/11] iio: accel: adxl313: add activity sensing

[Andy Shevchenko]

On Sun, Jun 1, 2025 at 8:22 PM Lothar Rubusch <l.rubusch@xxxxxxxxx> wrote:
>
> Add possibilities to set a threshold for activity sensing. Extend the
> interrupt handler to process activity interrupts. Provide functions to set
> the activity threshold and to enable/disable activity sensing. Further add
> a fake channel for having x, y and z axis anded on the iio channel.

IIO

And what does the 'anded' mean?

> This is a preparatory patch. Some of the definitions and functions are
> supposed to be extended for inactivity later on.

...

> +static int adxl313_is_act_inact_en(struct adxl313_data *data,
> +                                  enum adxl313_activity_type type)
> +{
> +       unsigned int axis_ctrl;
> +       unsigned int regval;
> +       int axis_en, int_en, ret;
> +
> +       ret = regmap_read(data->regmap, ADXL313_REG_ACT_INACT_CTL, &axis_ctrl);
> +       if (ret)
> +               return ret;
> +
> +       /* Check if axis for activity are enabled */
> +       if (type != ADXL313_ACTIVITY)
> +               return 0;
> +
> +       axis_en = FIELD_GET(ADXL313_ACT_XYZ_EN, axis_ctrl);

If it's false, it will be false anyway. No need to defer the check:

  if (!axis_en)
    return false;

> +       /* The axis are enabled, now check if specific interrupt is enabled */
> +       ret = regmap_read(data->regmap, ADXL313_REG_INT_ENABLE, &regval);
> +       if (ret)
> +               return ret;
> +
> +       int_en = adxl313_act_int_reg[type] & regval;
> +
> +       return axis_en && int_en;

  return ... & regval;

> +}

I have already commented on this a couple of times.

...

> +       /* Scale factor 15.625 mg/LSB */
> +       regval = DIV_ROUND_CLOSEST(MICRO * val + val2, 15625);

I would rather do

val * MICRO + val2

which is read more naturally (we will easily get that the expression
uses MICRO scale).

...

> +       int ret = -ENOENT;
> +
> +       if (FIELD_GET(ADXL313_INT_ACTIVITY, int_stat)) {
> +               ret = iio_push_event(indio_dev,
> +                                    IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
> +                                                       IIO_MOD_X_OR_Y_OR_Z,
> +                                                       IIO_EV_TYPE_MAG,
> +                                                       IIO_EV_DIR_RISING),
> +                                    ts);
> +               if (ret)
> +                       return ret;
> +       }
>
>         if (FIELD_GET(ADXL313_INT_WATERMARK, int_stat)) {
>                 samples = adxl313_get_samples(data);
>                 if (samples < 0)
>                         return samples;
>
> -               return adxl313_fifo_push(indio_dev, samples);
> +               ret = adxl313_fifo_push(indio_dev, samples);

This is not needed...

>         }
>
>         /* Return error if no event data was pushed to the IIO channel. */
> -       return -ENOENT;
> +       return ret;

...and this looks wrong.

Before the case was clear, if we have no respective bit set in the
int_stat, we return ENOENT. Now it depends on the other bit. If this
is correct behaviour, it needs a comment.

-- 
With Best Regards,
Andy Shevchenko