[PATCH v2 1/3] dt-bindings: eeprom: Add ST M24LR control interface

[Abd-Alrhman Masalkhi]

Add support for the control interface of STMicroelectronics M24LR
RFID/NFC EEPROM chips.

Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@xxxxxxxxx>
---
 .../devicetree/bindings/eeprom/st,m24lr.yaml  | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/eeprom/st,m24lr.yaml

diff --git a/Documentation/devicetree/bindings/eeprom/st,m24lr.yaml b/Documentation/devicetree/bindings/eeprom/st,m24lr.yaml
new file mode 100644
index 000000000000..6d72325865d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/st,m24lr.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/eeprom/st,m24lr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics M24LR Series NFC/RFID EEPROM Control Interface
+
+maintainers:
+  - Abd-Alrhman Masalkhi <abd.masalkhi@xxxxxxxxx>
+
+description: |
+  STMicroelectronics M24LR series are dual-interface (RF + I2C)
+  EEPROM chips. These devices support I2C-based access to both
+  memory and a system area that controls authentication and configuration.
+  They expose two I2C addresses: one for EEPROM memory and one for the
+  system control area (e.g., UID, password management).
+
+allOf:
+  - $ref: ../i2c/i2c-mux.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,m24lr04e-r
+      - st,m24lr16e-r
+      - st,m24lr64e-r
+
+  reg:
+    maxItems: 1
+
+  pagesize:
+    enum: [1, 4, 8, 16, 32, 64, 128, 256]
+    default: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Maximum number of bytes that can be written in one I2C transaction.
+      the default is 1.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2cmux@57 {
+        compatible = "st,m24lr04e-r";
+        reg = <0x57>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@0 {
+          reg = <0x0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          eeprom@53 {
+            compatible = "atmel,24c04";
+            reg = <0x53>;
+            address-width = <16>;
+            pagesize = <4>;
+          };
+        };
+      };
+    };
+...
-- 
2.43.0