Re: [PATCH v3 RESEND] PCI: Introduce Cray ClusterStor E1000 NVMe slot LED driver

[Pavel Machek]

Hi!

> Add driver to control the NVMe slot LEDs on the Cray ClusterStor E1000.
> The driver provides hotplug attention status callbacks for the 24 NVMe
> slots on the E1000.  This allows users to access the E1000's locate and
> fault LEDs via the normal /sys/bus/pci/slots/<slot>/attention sysfs
> entries.  This driver uses IPMI to communicate with the E1000 controller
> to toggle the LEDs.
> 
> Signed-off-by: Tony Hutter <hutter2@xxxxxxxx>

We have LED subsystem.

> +++ b/Documentation/ABI/testing/sysfs-bus-pci
> @@ -231,6 +231,27 @@ Description:
>  		    - scXX contains the device subclass;
>  		    - iXX contains the device class programming interface.
>  
> +What:		/sys/bus/pci/slots/.../attention
> +Date:		February 2025
> +Contact:	linux-pci@xxxxxxxxxxxxxxx
> +Description:
> +		The attention attribute is used to read or write the attention
> +		status for an enclosure slot.  This is often used to set the
> +		slot LED value on a NVMe storage enclosure.
> +
> +		Common values:
> +		0 = OFF
> +		1 = ON
> +		2 = blink (ampere, ibmphp, pciehp, rpaphp, shpchp)
> +
> +		Using the pciehp_craye1k extensions:
> +		0 = fault LED OFF, locate LED OFF
> +		1 = fault LED ON,  locate LED OFF
> +		2 = fault LED OFF, locate LED ON
> +		3 = fault LED ON,  locate LED ON
> +
> +		Other values are no-op, OFF, or ON depending on the driver.
> +

And this should use it.

Best regards,
									Pavel
-- 
I don't work for Nazis and criminals, and neither should you.
Boycott Putin, Trump, and Musk!

Attachment: signature.asc
Description: PGP signature