Re: [PATCH v2 2/4] riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree

[Han Gao]

Added ethernet support based on [4].

[4]: https://lore.kernel.org/all/20250506093256.1107770-5-inochiama@xxxxxxxxx/

On Sat, May 17, 2025 at 11:22 AM Chen Wang <unicorn_wang@xxxxxxxxxxx> wrote:
>
> Hi, Han,
>
> On 2025/5/14 22:09, Han Gao wrote:
> > Sophgo SG2042_EVB_V1.X [1] is a prototype development board based on SG2042
> >
> > Currently supports serial port, sdcard/emmc, pwm, fan speed control.
> >
> > Link: https://github.com/sophgo/sophgo-hardware/tree/master/SG2042/SG2042-x8-EVB [1]
> >
> > Signed-off-by: Han Gao <rabenda.cn@xxxxxxxxx>
> > ---
> >   arch/riscv/boot/dts/sophgo/Makefile          |   1 +
> >   arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts | 247 +++++++++++++++++++
> >   2 files changed, 248 insertions(+)
> >   create mode 100644 arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts
> >
> > diff --git a/arch/riscv/boot/dts/sophgo/Makefile b/arch/riscv/boot/dts/sophgo/Makefile
> > index 47d4243a8f35..2470e30ae901 100644
> > --- a/arch/riscv/boot/dts/sophgo/Makefile
> > +++ b/arch/riscv/boot/dts/sophgo/Makefile
> > @@ -3,3 +3,4 @@ dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb
> >   dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb
> >   dtb-$(CONFIG_ARCH_SOPHGO) += sg2002-licheerv-nano-b.dtb
> >   dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb
> > +dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-evb-v1.dtb
> > diff --git a/arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts b/arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts
> > new file mode 100644
> > index 000000000000..4f39a2575b8e
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts
>
> Please run "make CHECK_DTBS=y W=1 your_dtb_file" before submitting
> patch. I have a quick check and get following warnings/errors:
>
> Error: ....../arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts:67.1-7 Label
> or path gmac0 not found
> Error: ....../arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts:86.14-15
> syntax error
> FATAL ERROR: Unable to parse input tree
>
> And the similar issues existing for sg2042-evb-v2.dts.
>
> [......]
>
> > +&gmac0 {
> > +     phy-handle = <&phy0>;
> > +     phy-mode = "rgmii-id";
> > +     status = "okay";
> > +
> > +     mdio {
> > +             phy0: phy@0 {
> > +                     compatible = "ethernet-phy-ieee802.3-c22";
> > +                     reg = <0>;
> > +                     reset-gpios = <&port0a 27 GPIO_ACTIVE_LOW>;
> > +                     reset-assert-us = <100000>;
> > +                     reset-deassert-us = <100000>;
> > +             };
> > +     };
> > +};
>
> This should be dropped, we can add this after ethernet support is
> upstreamed.
>
> The same for evb_v2.
>
> [......]
>
> Thanks.
>
> Chen
>
>