Re: [PATCH 14/14] arm64: dts: Add DSPI entries for S32G platforms

[James Clark]

On 09/05/2025 1:54 pm, Matti Vaittinen wrote:
> On 09/05/2025 14:26, Krzysztof Kozlowski wrote:
> > On 09/05/2025 13:06, James Clark wrote:
> > > +&spi1 {
> > > +    pinctrl-0 = <&dspi1_pins>;
> > > +    pinctrl-names = "default";
> > > +    #address-cells = <1>;
> > > +    #size-cells = <0>;
> > > +    status = "okay";
> > > +
> > > +    spidev0: spidev@0 {
> >
> >
> > Node names should be generic. See also an explanation and list of
> > examples (not exhaustive) in DT specification:
> > https://devicetree-specification.readthedocs.io/en/latest/chapter2- 
> > devicetree-basics.html#generic-names-recommendation
> >
> >
> > > +        compatible = "rohm,dh2228fv";
> >
> >
> > Nah, I really doubt. That's not the device you have there. It's
> > possible, though, so can you share schematics?
>
> Actually, not even possible. There is no DH2228FV from ROHM. There is 
> BH2228FV though:
> https://www.rohm.com/products/data-converter/d-a-converters/8bit-d-a/ 
> bh2228fv-product
>
> but as you know, it is unlikely this is the part populated on the board.
>
> For the author:
> https://lore.kernel.org/linux-rockchip/20250213-calamity- 
> smuggler-5d606993be32@spud/T/
>
> Yours,
>      -- Matti

Correct, I believe these go straight to a header and aren't connected, 
so this device is just an example placeholder for a 'generic' SPI device.

It might be more accurate to remove this, and then anyone using the 
board for development would have to fill in themselves whatever device 
is attached to it.

Thanks
James