Re: [PATCH v3 1/2] arm64: dts: ti: k3-am68-sk/k3-j721s2-mcu: Add bootph-all property to enable Ethernet boot
From: Nishanth Menon
Date: Fri Apr 25 2025 - 17:24:43 EST
On 10:40-20250425, Chintan Vankar wrote:
> Ethernet boot requires CPSW nodes to be present starting from R5 SPL
> stage. Add bootph-all property to required nodes to enable Ethernet boot
> on AM68-SK and J721S2-EVM.
>
> Reviewed-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
> Signed-off-by: Chintan Vankar <c-vankar@xxxxxx>
> ---
>
> Link to v2:
> https://lore.kernel.org/r/20250302153502.181832-2-c-vankar@xxxxxx/
>
> Changes from v2 to v3:
> - Removed "bootph-all" property from "mcu_cpsw" node as suggested by
> Vignesh since child node already has that.
>
> arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 3 +++
> arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 3 +++
Why does every board that uses j721s2 need to have bootph-all for
cpsw? Is network boot mandatory boot mode for all boards? That does
not sound right. Just do them in the board file please.
> 2 files changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> index 5fa70a874d7b..c402d5e288b0 100644
> --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> @@ -344,6 +344,7 @@ J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
> J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
> J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
> >;
> + bootph-all;
> };
>
> mcu_mdio_pins_default: mcu-mdio-default-pins {
> @@ -351,6 +352,7 @@ mcu_mdio_pins_default: mcu-mdio-default-pins {
> J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
> J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
> >;
> + bootph-all;
> };
>
> mcu_mcan0_pins_default: mcu-mcan0-default-pins {
> @@ -626,6 +628,7 @@ &mcu_cpsw {
> &davinci_mdio {
> phy0: ethernet-phy@0 {
> reg = <0>;
> + bootph-all;
> ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> ti,min-output-impedance;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index bc31266126d0..218290b1840a 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -154,12 +154,14 @@ mcu_conf: bus@40f00000 {
> cpsw_mac_syscon: ethernet-mac-syscon@200 {
> compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
> reg = <0x200 0x8>;
> + bootph-all;
> };
>
> phy_gmii_sel: phy@4040 {
> compatible = "ti,am654-phy-gmii-sel";
> reg = <0x4040 0x4>;
> #phy-cells = <1>;
> + bootph-all;
> };
>
> };
> @@ -562,6 +564,7 @@ cpsw_port1: port@1 {
> label = "port1";
> ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
> phys = <&phy_gmii_sel 1>;
> + bootph-all;
> };
> };
>
> --
> 2.34.1
>
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D