Re: [PATCH v8 1/2] arm64: dts: qcom: ipq5018: Add PCIe related nodes

[Konrad Dybcio]

On 4/25/25 2:00 PM, George Moussalem via B4 Relay wrote:
> From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
> 
> Add phy and controller nodes for a 2-lane Gen2 and
> a 1-lane Gen2 PCIe bus. IPQ5018 has 8 MSI SPI interrupts and
> one global interrupt.
> 
> NOTE: the PCIe controller supports gen3, yet the phy is limited to gen2.
> 
> Signed-off-by: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
> Signed-off-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
> Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 246 +++++++++++++++++++++++++++++++++-
>  1 file changed, 244 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 8914f2ef0bc47fda243b19174f77ce73fc10757d..917c6eb7c227e405e9216125cff15551f57839a5 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -147,6 +147,40 @@ usbphy0: phy@5b000 {
>  			status = "disabled";
>  		};
>  
> +		pcie1_phy: phy@7e000{

"@7e000 {"

[...]

> +		pcie0_phy: phy@86000{

ditto

[...]

> +
> +			/*
> +			 * While the PCIe controller supports gen3,
> +			 * the phy is limited to gen2. Hence, limit
> +			 * the link speed to gen2.
> +			 */

/* The controller supports Gen3, but the connected PHY is only Gen2-capable */

and it nicely fits into 1 line!

With that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad