[PATCH 3/4] arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-pinetab2

[Diederik de Haas]

As described on page 37 of PineTab2 Schematic-20230417, the SPI Flash's
VCC connector is connected to VCCIO_FLASH and according to page 6 of
that same schematic, that belongs to the VCC_1V8 power source.

This fixes the following warning:

  spi-nor spi4.0: supply vcc not found, using dummy regulator

Fixes: e7f4e924f46d ("dt-bindings: mtd: jedec,spi-nor: add optional vcc-supply")
Signed-off-by: Diederik de Haas <didi.debian@xxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
index 26cf765a7297..3473b1eef5cd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
@@ -867,6 +867,7 @@ flash@0 {
 		spi-max-frequency = <100000000>;
 		spi-rx-bus-width = <2>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
-- 
2.49.0