Re: [net-next v6 4/7] net: mtip: The L2 switch driver for imx287

[Stefan Wahren]

Am 18.04.25 um 11:02 schrieb Lukasz Majewski:
> Hi Stefan,
>
> > Am 18.04.25 um 08:07 schrieb Lukasz Majewski:
> > > This patch series provides support for More Than IP L2 switch
> > > embedded in the imx287 SoC.
> > >
> > > This is a two port switch (placed between uDMA[01] and MAC-NET[01]),
> > > which can be used for offloading the network traffic.
> > >
> > > It can be used interchangeably with current FEC driver - to be more
> > > specific: one can use either of it, depending on the requirements.
> > >
> > > The biggest difference is the usage of DMA - when FEC is used,
> > > separate DMAs are available for each ENET-MAC block.
> > > However, with switch enabled - only the DMA0 is used to
> > > send/receive data to/form switch (and then switch sends them to
> > > respecitive ports).
> > >
> > > Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
> > After changing the IRQ name part mention in patch 1, you can add
> >
> > Reviewed-by: Stefan Wahren <wahrenst@xxxxxxx>
> Shall I add RoB tag to all patches?
In case you mean Reviewed-by: yes
> I will wait for ACK from at least Andrew and then reset the v7 with all
> tags collected.
>
> > Thanks
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH,      Managing Director: Erika Unter
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@xxxxxxx