[PATCH] iio: frequency: Use SLEEP bit instead of RESET to disable output

[Gabriel Shahrouzi]

According to the AD9832 datasheet (Table 10, D12 description), setting
the RESET bit forces the phase accumulator to zero, which corresponds to
a full-scale DC output, rather than disabling the output signal.

The correct way to disable the output and enter a low-power state is to
set the AD9832_SLEEP bit (Table 10, D13 description), which powers down
the internal DAC current sources and disables internal clocks.

Fixes: ea707584bac1 ("Staging: IIO: DDS: AD9832 / AD9835 driver")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@xxxxxxxxx>
---
 drivers/staging/iio/frequency/ad9832.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/iio/frequency/ad9832.c b/drivers/staging/iio/frequency/ad9832.c
index db42810c7664b..0872ff4ec4896 100644
--- a/drivers/staging/iio/frequency/ad9832.c
+++ b/drivers/staging/iio/frequency/ad9832.c
@@ -232,7 +232,7 @@ static ssize_t ad9832_write(struct device *dev, struct device_attribute *attr,
 			st->ctrl_src &= ~(AD9832_RESET | AD9832_SLEEP |
 					AD9832_CLR);
 		else
-			st->ctrl_src |= AD9832_RESET;
+			st->ctrl_src |= AD9832_SLEEP;
 
 		st->data = cpu_to_be16((AD9832_CMD_SLEEPRESCLR << CMD_SHIFT) |
 					st->ctrl_src);
-- 
2.43.0