[PATCH v3 3/4] arm64: dts: ti: k3-j722s-main: don't disable serdes0 and serdes1

[Siddharth Vadapalli]

Since serdes0 and serdes1 are the child nodes of serdes_wiz0 and
serdes_wiz1 respectively, and, given that serdes_wiz0 and serdes_wiz1
are already disabled, it is not necessary to disable serdes0 and serdes1.

Moreover, having serdes_wiz0/serdes_wiz1 enabled and serdes0/serdes1
disabled is not a working configuration.

Hence, remove 'status = "disabled"' from the serdes0 and serdes1 nodes.

Suggested-by: Udit Kumar <u-kumar1@xxxxxx>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
Reviewed-by: Udit Kumar <u-kumar1@xxxxxx>
---

This patch doesn't have a v2 and has been newly introduced in this
series.

v1 of this patch is at:
https://lore.kernel.org/r/20250412052712.927626-2-s-vadapalli@xxxxxx/
Changes since v1:
- Collected Reviewed-by tags from Udit Kumar <u-kumar1@xxxxxx>.

Regards,
Siddharth.

 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index beda9e40e931..562dfbdf449d 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -52,8 +52,6 @@ serdes0: serdes@f000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#clock-cells = <1>;
-
-			status = "disabled"; /* Needs lane config */
 		};
 	};
 
@@ -92,8 +90,6 @@ serdes1: serdes@f010000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#clock-cells = <1>;
-
-			status = "disabled"; /* Needs lane config */
 		};
 	};
 
-- 
2.34.1