Re: [PATCH 4/4] dt-bindings: clock: ti: add ti,autoidle.yaml reference

From: Sukrut Bellary
Date: Wed Apr 09 2025 - 04:40:43 EST


On Fri, Apr 04, 2025 at 02:42:06PM -0500, Rob Herring wrote:
> On Thu, Apr 03, 2025 at 06:45:00PM -0700, Sukrut Bellary wrote:
> > ti,divider-clock uses properties from ti,autoidle.
> >
> > As we are converting autoidle binding to ti,autoidle.yaml,
> > fix the reference here.
> >
> > Add dual license.
>
> Do you have rights to do so?

I will keep it as is.
May be Andreas can take care of this.

> >
> > Signed-off-by: Sukrut Bellary <sbellary@xxxxxxxxxxxx>
> > ---
> > .../bindings/clock/ti/ti,divider-clock.yaml | 24 ++++---------------
> > 1 file changed, 5 insertions(+), 19 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
> > index 3fbe236eb565..aba879ae302d 100644
> > --- a/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
> > +++ b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
> > @@ -1,4 +1,4 @@
> > -# SPDX-License-Identifier: GPL-2.0-only
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > %YAML 1.2
> > ---
> > $id: http://devicetree.org/schemas/clock/ti/ti,divider-clock.yaml#
> > @@ -55,9 +55,10 @@ description: |
> > is missing it is the same as supplying a zero shift.
> >
> > This binding can also optionally provide support to the hardware autoidle
> > - feature, see [1].
> > + feature.
> >
> > - [1] Documentation/devicetree/bindings/clock/ti/autoidle.txt
> > +allOf:
> > + - $ref: /schemas/clock/ti/ti,autoidle.yaml#
> >
> > properties:
> > compatible:
> > @@ -97,7 +98,6 @@ properties:
> > minimum: 1
> > default: 1
> >
> > -
> > ti,max-div:
> > $ref: /schemas/types.yaml#/definitions/uint32
> > description:
> > @@ -116,20 +116,6 @@ properties:
> > valid divisor programming must be a power of two,
> > only valid if ti,dividers is not defined.
> >
> > - ti,autoidle-shift:
> > - $ref: /schemas/types.yaml#/definitions/uint32
> > - description:
> > - bit shift of the autoidle enable bit for the clock,
> > - see [1].
> > - maximum: 31
> > - default: 0
> > -
> > - ti,invert-autoidle-bit:
> > - type: boolean
> > - description:
> > - autoidle is enabled by setting the bit to 0,
> > - see [1]
> > -
> > ti,set-rate-parent:
> > type: boolean
> > description:
> > @@ -156,7 +142,7 @@ required:
> > - clocks
> > - reg
> >
> > -additionalProperties: false
> > +unevaluatedProperties: false
> >
> > examples:
> > - |
> > --
> > 2.34.1
> >