RE: [PATCH v3 2/3] dt-bindings: iio: dac: Add adi,ad3530r.yaml

[Paller, Kim Seer]

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Sent: Thursday, April 3, 2025 2:44 PM
> To: Paller, Kim Seer <KimSeer.Paller@xxxxxxxxxx>
> Cc: Jonathan Cameron <jic23@xxxxxxxxxx>; Lars-Peter Clausen
> <lars@xxxxxxxxxx>; Hennerich, Michael <Michael.Hennerich@xxxxxxxxxx>;
> Rob Herring <robh@xxxxxxxxxx>; Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>;
> Conor Dooley <conor+dt@xxxxxxxxxx>; linux-iio@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v3 2/3] dt-bindings: iio: dac: Add adi,ad3530r.yaml
> 
> [External]
> 
> On Thu, Apr 03, 2025 at 01:33:56PM +0800, Kim Seer Paller wrote:
> > Document the AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-
> channel)
> > low-power, 16-bit, buffered voltage output DACs with software-
> > programmable gain controls. They provide full-scale output spans of
> > 2.5V or 5V for reference voltages of 2.5V. These devices operate on a
> > single 2.7V to 5.5V supply and are guaranteed to be monotonic by design.
> > The "R" variants include a 2.5V, 5ppm/°C internal reference, which is
> > disabled by default.
> >
> > Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/iio/dac/adi,ad3530r.yaml   | 99
> ++++++++++++++++++++++
> >  MAINTAINERS                                        |  7 ++
> >  2 files changed, 106 insertions(+)
> 
> You got report about error in v2, which you did not respond to.
> 
> You send v3... with same error. I don't understand this.

I'm not sure, but based on the information provided, the errors might be
unrelated to the driver, or I might have missed something.

> 
> Best regards,
> Krzysztof