Re: [PATCH 09/17] dt-bindings: interrupt-controller: Add support for Microchip LAN966x OIC

[Rob Herring]

On Mon, May 13, 2024 at 02:37:20PM +0200, Herve Codina wrote:
> Hi Rob,
> 
> On Tue, 7 May 2024 10:28:06 -0500
> Rob Herring <robh@xxxxxxxxxx> wrote:
> 
> ...
> > > +examples:
> > > +  - |
> > > +    interrupt-controller@e00c0120 {
> > > +        compatible = "microchip,lan966x-oic";
> > > +        reg = <0xe00c0120 0x190>;  
> > 
> > Looks like this is part of some larger block?
> > 
> 
> According to the registers information document:
>   https://microchip-ung.github.io/lan9662_reginfo/reginfo_LAN9662.html?select=cpu,intr
> 
> The interrupt controller is mapped at offset 0x48 (offset in number of
> 32bit words).
> -> Address offset: 0x48 * 4 = 0x120
> -> size: (0x63 + 1) *  4 = 0x190
> 
> IMHO, the reg property value looks correct.

What I mean is h/w blocks don't just start at some address with small 
alignment. That wouldn't work from a physical design standpoint. The 
larger block here is "CPU System Regs". The block as a whole should be 
documented, but maybe that ship already sailed.

Also, here you call it the OIC, but the link above calls it the VCore 
interrupt controller.

Rob