Re: [PATCH v4] usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach
From: Hardik Gajjar
Date: Fri May 10 2024 - 05:45:51 EST
On Thu, May 02, 2024 at 10:32:16PM +0200, Ferry Toth wrote:
> Oops, sorry, wrong file attached . Now correct one.
>
> Op 02-05-2024 om 22:13 schreef Ferry Toth:
> > Op 02-05-2024 om 17:29 schreef Hardik Gajjar:
> > > On Tue, Apr 30, 2024 at 11:12:17PM +0200, Ferry Toth wrote:
> > > > Hi,
> > > >
> > > > Op 30-04-2024 om 21:40 schreef Ferry Toth:
> > > > > Hi,
> > > > >
> > > > > Op 30-04-2024 om 17:32 schreef Hardik Gajjar:
> > > > > > On Sun, Apr 28, 2024 at 11:07:36PM +0200, Ferry Toth wrote:
> > > > > > > Hi,
> > > > > > >
> > > > > > > Op 25-04-2024 om 23:27 schreef Ferry Toth:
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > Op 17-04-2024 om 17:13 schreef Hardik Gajjar:
> > > > > > > > > On Tue, Apr 16, 2024 at 04:48:32PM +0300, Andy Shevchenko wrote:
> > > > > > > > > > On Thu, Apr 11, 2024 at 10:52:36PM +0200, Ferry Toth wrote:
> > > > > > > > > > > Op 11-04-2024 om 18:39 schreef Andy Shevchenko:
> > > > > > > > > > > > On Thu, Apr 11, 2024 at 04:26:37PM +0200, Hardik Gajjar wrote:
> > > > > > > > > > > > > On Wed, Apr 10, 2024 at
> > > > > > > > > > > > > 08:37:42PM +0300, Andy
> > > > > > > > > > > > > Shevchenko wrote:
> > > > > > > > > > > > > > On Sun, Apr 07, 2024 at 10:51:51PM +0200, Ferry Toth wrote:
> > > > > > > > > > > > > > > Op 05-04-2024 om 13:38 schreef Hardik Gajjar:
> > > > > > > > > >
> > > > > > > > > > ...
> > > > > > > > > >
> > > > > > > > > > > > > > > Exactly. And this didn't happen before the 2 patches.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > To be precise: /sys/class/net/usb0 is not
> > > > > > > > > > > > > > > removed and it is a link, the link
> > > > > > > > > > > > > > > target /sys/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/gadget.0/net/usb0
> > > > > > > > > > > > > > > no
> > > > > > > > > > > > > > > longer exists
> > > > > > > > > > > > > So, it means that the /sys/class/net/usb0 is
> > > > > > > > > > > > > present, but the symlink is
> > > > > > > > > > > > > broken. In that case, the dwc3 driver should
> > > > > > > > > > > > > recreate the device, and the
> > > > > > > > > > > > > symlink should become active again
> > > > > > > > > > >
> > > > > > > > > > > Yes, on first enabling gadget (when device mode is activated):
> > > > > > > > > > >
> > > > > > > > > > > root@yuna:~# ls
> > > > > > > > > > > /sys/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/gadget.0/
> > > > > > > > > > > driver net power sound subsystem suspended uevent
> > > > > > > > > > >
> > > > > > > > > > > Then switching to host mode:
> > > > > > > > > > >
> > > > > > > > > > > root@yuna:~# ls
> > > > > > > > > > > /sys/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/gadget.0/
> > > > > > > > > > > ls: cannot access
> > > > > > > > > > > '/sys/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/gadget.0/':
> > > > > > > > > > > No such file
> > > > > > > > > > > or directory
> > > > > > > > > > >
> > > > > > > > > > > Then back to device mode:
> > > > > > > > > > >
> > > > > > > > > > > root@yuna:~# ls
> > > > > > > > > > > /sys/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/gadget.0/
> > > > > > > > > > > driver power sound subsystem suspended uevent
> > > > > > > > > > >
> > > > > > > > > > > net is missing. But, network functions:
> > > > > > > > > > >
> > > > > > > > > > > root@yuna:~# ping 10.42.0.1
> > > > > > > > > > > PING 10.42.0.1 (10.42.0.1): 56 data bytes
> > > > > > > > > > >
> > > > > > > > > > > Mass storage device is created and removed each time as expected.
> > > > > > > > > >
> > > > > > > > > > So, what's the conclusion? Shall we move towards revert of those
> > > > > > > > > > two changes?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > As promised, I have the tested the this patch with the dwc3 gadget.
> > > > > > > > > I could not reproduce
> > > > > > > > > the issue.
> > > > > > > > >
> > > > > > > > > I can see the usb0 exist all the time and accessible regardless of
> > > > > > > > > the role switching of the USB mode (peripheral <-> host)
> > > > > > > > >
> > > > > > > > > Following are the logs:
> > > > > > > > > //Host to device
> > > > > > > > >
> > > > > > > > > console:/sys/bus/platform/devices/a800000.ssusb # echo "peripheral"
> > > > > > > > > > mode
> > > > > > > > > console:/sys/bus/platform/devices/a800000.ssusb # ls
> > > > > > > > > a800000.dwc3/gadget/net/
> > > > > > > > > usb0
> > > > > > > > >
> > > > > > > > > //device to host
> > > > > > > > > console:/sys/bus/platform/devices/a800000.ssusb
> > > > > > > > > # echo "host" > mode
> > > > > > > > > console:/sys/bus/platform/devices/a800000.ssusb # ls
> > > > > > > > > a800000.dwc3/gadget/net/
> > > > > > > > > usb0
> > > > > > > >
> > > > > > > > That is weird. When I switch to host mode (using
> > > > > > > > the physical switch),
> > > > > > > > the whole gadget directory is removed (now testing 6.9.0-rc5)
> > > > > > > >
> > > > > > > > Switching back to device mode, that gadget
> > > > > > > > directory is recreated. And
> > > > > > > > gadget/sound as well, but not gadget/net.
> > > > > > > >
> > > > > > > > > s a800000.dwc3/gadget/net/usb0
> > > > > > > > > <
> > > > > > > > > addr_assign_type duplex phys_port_name
> > > > > > > > > addr_len flags phys_switch_id
> > > > > > > > > address gro_flush_timeout power
> > > > > > > > > broadcast ifalias proto_down
> > > > > > > > > carrier ifindex queues
> > > > > > > > > carrier_changes iflink speed
> > > > > > > > > carrier_down_count link_mode statistics
> > > > > > > > > carrier_up_count mtu subsystem
> > > > > > > > > dev_id name_assign_type tx_queue_len
> > > > > > > > > dev_port netdev_group type
> > > > > > > > > device operstate uevent
> > > > > > > > > dormant phys_port_id waiting_for_supplier
> > > > > > > > > console:/sys/bus/platform/devices/a800000.ssusb # ifconfig -a usb0
> > > > > > > > > usb0 Link encap:Ethernet HWaddr 3a:8b:63:97:1a:9a
> > > > > > > > > BROADCAST MULTICAST MTU:1500 Metric:1
> > > > > > > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > > > > > > > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > > > > > > > > collisions:0 txqueuelen:1000
> > > > > > > > > RX bytes:0 TX bytes:0
> > > > > > > > >
> > > > > > > > > console:/sys/bus/platform/devices/a800000.ssusb #
> > > > > > > > >
> > > > > > > > > I strongly advise against reverting the patch solely based on the
> > > > > > > > > observed issue of removing the /sys/class/net/usb0 directory while
> > > > > > > > > the usb0 interface remains available.
> > > > > > > >
> > > > > > > > There's more to it. I also mentioned that switching the role or
> > > > > > > > unplugging the cable leaves the usb0 connection.
> > > > > > > >
> > > > > > > > I have while in host mode:
> > > > > > > > root@yuna:~# ifconfig -a usb0
> > > > > > > > usb0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500
> > > > > > > > inet 10.42.0.221 netmask 255.255.255.0 broadcast
> > > > > > > > 10.42.0.255
> > > > > > > > inet6 fe80::a8bb:ccff:fedd:eef1 prefixlen 64
> > > > > > > > scopeid 0x20<link>
> > > > > > > >
> > > > > > > >
> > > > > > > > You don't see that because you didn't create a connection at all.
> > > > > > > >
> > > > > > > > > Instead, I recommend enabling FTRACE to
> > > > > > > > > trace the functions involved
> > > > > > > > > and identify which faulty call is responsible for removing usb0.
> > > > > > > >
> > > > > > > > Switching from device -> host -> device:
> > > > > > > >
> > > > > > > > root@yuna:~# trace-cmd record -p function_graph -l *gether_*
> > > > > > > > plugin 'function_graph'
> > > > > > > > Hit Ctrl^C to stop recording
> > > > > > > > ^CCPU0 data recorded at offset=0x1c8000
> > > > > > > > 188 bytes in size (4096 uncompressed)
> > > > > > > > CPU1 data recorded at offset=0x1c9000
> > > > > > > > 0 bytes in size (0 uncompressed)
> > > > > > > > root@yuna:~# trace-cmd report
> > > > > > > > cpus=2
> > > > > > > > irq/68-dwc3-725 [000] 514.575337:
> > > > > > > > funcgraph_entry: #
> > > > > > > > 2079.480 us | gether_disconnect();
> > > > > > > > irq/68-dwc3-946 [000] 524.263731:
> > > > > > > > funcgraph_entry: +
> > > > > > > > 11.640 us | gether_disconnect();
> > > > > > > > irq/68-dwc3-946 [000] 524.263743:
> > > > > > > > funcgraph_entry: !
> > > > > > > > 116.520 us | gether_connect();
> > > > > > > > irq/68-dwc3-946 [000] 524.268029:
> > > > > > > > funcgraph_entry: #
> > > > > > > > 2057.260 us | gether_disconnect();
> > > > > > > > irq/68-dwc3-946 [000] 524.270089:
> > > > > > > > funcgraph_entry: !
> > > > > > > > 109.000 us | gether_connect();
> > > > > > >
> > > > > > > I tried to get a more useful trace:
> > > > > > > root@yuna:/sys/kernel/tracing# echo 'gether_*' > set_ftrace_filter
> > > > > > > root@yuna:/sys/kernel/tracing# echo 'eem_*' >> set_ftrace_filter
> > > > > > > root@yuna:/sys/kernel/tracing# echo function > current_tracer
> > > > > > > root@yuna:/sys/kernel/tracing# echo 'reset_config'
> > > > > > > >> set_ftrace_filter
> > > > > > > -> switch to host mode then back to device
> > > > > > > root@yuna:/sys/kernel/tracing# cat trace
> > > > > > > # tracer: function
> > > > > > > #
> > > > > > > # entries-in-buffer/entries-written: 53/53 #P:2
> > > > > > > #
> > > > > > > # _-----=> irqs-off/BH-disabled
> > > > > > > # / _----=> need-resched
> > > > > > > # | / _---=> hardirq/softirq
> > > > > > > # || / _--=> preempt-depth
> > > > > > > # ||| / _-=> migrate-disable
> > > > > > > # |||| / delay
> > > > > > > # TASK-PID CPU# ||||| TIMESTAMP FUNCTION
> > > > > > > # | | | ||||| | |
> > > > > > > irq/68-dwc3-523 [000] D..3. 133.990254: reset_config
> > > > > > > <-__composite_disconnect
> > > > > > > irq/68-dwc3-523 [000] D..3. 133.992274: eem_disable
> > > > > > > <-reset_config
> > > > > > > irq/68-dwc3-523 [000] D..3. 133.992276:
> > > > > > > gether_disconnect
> > > > > > > <-reset_config
> > > > > > > kworker/1:3-443 [001] ...1. 134.022453: eem_unbind
> > > > > > > <-purge_configs_funcs
> > > > > > >
> > > > > > > -> to device mode
> > > > > > >
> > > > > > > kworker/1:3-443 [001] ...1. 148.630773: eem_bind
> > > > > > > <-usb_add_function
> > > > > > > irq/68-dwc3-734 [000] D..3. 149.155209: eem_set_alt
> > > > > > > <-composite_setup
> > > > > > > irq/68-dwc3-734 [000] D..3. 149.155215:
> > > > > > > gether_disconnect
> > > > > > > <-eem_set_alt
> > > > > > > irq/68-dwc3-734 [000] D..3. 149.155220: gether_connect
> > > > > > > <-eem_set_alt
> > > > > > > irq/68-dwc3-734 [000] D..3. 149.157287: eem_set_alt
> > > > > > > <-composite_setup
> > > > > > > irq/68-dwc3-734 [000] D..3. 149.157292:
> > > > > > > gether_disconnect
> > > > > > > <-eem_set_alt
> > > > > > > irq/68-dwc3-734 [000] D..3. 149.159338: gether_connect
> > > > > > > <-eem_set_alt
> > > > > > > irq/68-dwc3-734 [000] D..2. 149.239625: eem_unwrap
> > > > > > > <-rx_complete
> > > > > > > ...
> > > > > > >
> > > > > > > I don't know where to look exactly. Any hints?
> > > > > >
> > > > > > do you see anything related to gether_cleanup() after eem_unbind() ?
> > > > >
> > > > > Nope. It's a pitty that the trace formatting got messed up
> > > > > above. But as
> > > > > you can see I traced gether_* and eem_*. After eem_unbind no traced
> > > > > function is called, until I flip the switch to device mode.
> > > > > The ... at the end is where I cut uninteresting eem_unwrap
> > > > > <-rx_complete
> > > > > and eem_wrap <-eth_start_xmit lines.
> > > > >
> > > > > > If not then, you may try to enable tracing of TCP/IP stack and
> > > > > > network side to check who deleting the sysfs entry
> > > > >
> > > > > Yes, that's a vast amount of functions to trace. And I don't see how
> > > > > that would be related to the patch we're discussing here. I was hoping
> > > > > for a little more targeted hint.
> > > >
> > > > Now filtering 'gether_*', 'eem_*', '*configfs_*', 'composite_*',
> > > > 'usb_fun*',
> > > > 'reset_config' and 'device_remove_file' leads me to:
> > > >
> > > > TIMESTAMP FUNCTION
> > > > | |
> > > > 49.952477: eem_wrap <-eth_start_xmit
> > > > 55.072455: eem_wrap <-eth_start_xmit
> > > > 55.072621: eem_unwrap <-rx_complete
> > > > 59.011540: configfs_composite_reset <-usb_gadget_udc_reset
> > > > 59.011545: composite_reset <-configfs_composite_reset
> > > > 59.011548: reset_config <-__composite_disconnect
> > > > 59.013565: eem_disable <-reset_config
> > > > 59.013567: gether_disconnect <-reset_config
> > > > 59.049560: device_remove_file <-device_remove
> > > > 59.051185: configfs_composite_disconnect <-usb_gadget_disco
> > > > 59.051189: composite_disconnect <-configfs_composite_discon
> > > > 59.051195: configfs_composite_unbind <-gadget_unbind_driver
> > > > 59.052519: eem_unbind <-purge_configs_funcs
> > > > 59.052529: composite_dev_cleanup <-configfs_composite_unbin
> > > > 59.052537: device_remove_file <-composite_dev_cleanup
> > > >
> > > > device_remove_file gets called twice, once by device_remove after
> > > > gether_disconnect (that the one). The 2nd time by composite_dev_cleanup
> > > > (removing the gadget)
> > >
> > > I believe that the device_remove_file function is only removing
> > > suspend-specific attributes, not the complete gadget.
> > > Typically, when you perform the role switch, the Gadget start/stop
> > > function in your UDC driver is called. These functions should not
> > > delete the gadget
> > >
> > > To investigate further, could you please enable the DWC3 functions
> > > in ftrace and check who is removing the gadget?
> > > I can also enable this on my system and compare the logs with yours,
> > > but I will be in PI planning for 1.5 weeks and may not be able to
> > > provide immediate support.
> >
> > Yes, but of course adding dwc3_* (and usb_*) also traces host mode, so
> > trace is 600kb. I cut uninteresting stuff before
> > configfs_composite_reset <-usb_gadget_udc_reset and after
> > __dwc3_set_mode, <https://urldefense.proofpoint.com/v2/url?u=http-3A__300linesremain.Seeattachedtar.gzforyouto&d=DwIDaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=SAhjP5GOmrADp1v_EE5jWoSuMlYCIt9gKduw-DCBPLs&m=zdiBhk-2V5AXxu707QAhbCgWR4qNVRARBmxN17nVB69gVOm-QPqrJeKpo4_trszw&s=ixagWKgLs6wQDJfwh4vIDQNDiy8GZnK9KnUELIfiJz0&e=>
> > compare.
> >
Could you please try with the following patch and see if your issue resolves ?
diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c
index 3b445bd88498..c2a904475083 100644
--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -247,7 +247,7 @@ static int eem_bind(struct usb_configuration *c, struct usb_function *f)
struct usb_composite_dev *cdev = c->cdev;
struct f_eem *eem = func_to_eem(f);
struct usb_string *us;
- int status;
+ int status = 0;
struct usb_ep *ep;
struct f_eem_opts *eem_opts;
@@ -260,16 +260,20 @@ static int eem_bind(struct usb_configuration *c, struct usb_function *f)
* with list_for_each_entry, so we assume no race condition
* with regard to eem_opts->bound access
*/
+ mutex_lock(&eem_opts->lock);
+ gether_set_gadget(eem_opts->net, cdev->gadget);
+
if (!eem_opts->bound) {
- mutex_lock(&eem_opts->lock);
- gether_set_gadget(eem_opts->net, cdev->gadget);
status = gether_register_netdev(eem_opts->net);
- mutex_unlock(&eem_opts->lock);
- if (status)
- return status;
- eem_opts->bound = true;
}
+ mutex_unlock(&eem_opts->lock);
+
+ if (status)
+ goto fail;
+
+ eem_opts->bound = true;
+
us = usb_gstrings_attach(cdev, eem_strings,
ARRAY_SIZE(eem_string_defs));
> > > Additionally, please check if you have any customized DWC patches
> > > that may be causing this problem.
> > >
> > > >
> > > > > You may recall the whole issue did not occur before this
> > > > > patch got applied.
> > > > >
> > > > > > Hardik
> > > > > >
> > > > > >
> > > > > > >
> > > > > > > >
> > > > > > > > > According to current kernel architecture of u_ether driver, only
> > > > > > > > > gether_cleanup should remove the usb0 interface along with its
> > > > > > > > > kobject and sysfs interface.
> > > > > > > > > I suggest sharing the analysis here to understand why this practice
> > > > > > > > > is not followed in your use case or driver ?
> > > > > > > >
> > > > > > > > Yes, I'll try to trace where that happens.
> > > > > > > >
> > > > > > > > Nevertheless, the disappearance of the net/usb0 directory seems
> > > > > > > > harmless? But the usb: net device remaining after disconnect or role
> > > > > > > > switch is not good, as the route remains.
> > > > > > > >
> > > > > > > > May be they are 2 separate problems. Could you try to reproduce what
> > > > > > > > happens if you make eem connection and then unplug?
> > > > > > > >
> > > > > > > > > I am curious why the driver was developed without adhering to the
> > > > > > > > > kernel's gadget architecture.
> > > > > > >
> > > > > > > I don't know what you mean here. Which driver do you mean?
> > > > > > >
> > > > > > > > > >
> > > > > > > > > > > > > I have the dwc3 IP base usb controller, Let me check
> > > > > > > > > > > > > with this patch and
> > > > > > > > > > > > > share result here. May be we need some fix in dwc3
> > > > > > > > > > > Would have been nice if someone could test on other
> > > > > > > > > > > controller as well. But
> > > > > > > > > > > another instance of dwc3 is also very welcome.
> > > > > > > > > > > > It's quite possible, please test on your side.
> > > > > > > > > > > > We are happy to test any fixes if you come up with.
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > With Best Regards,
> > > > > > > > > > Andy Shevchenko
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > >