Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface

[Parthiban.Veerasooran]

Hi Andrew,

On 08/05/24 10:34 pm, Andrew Lunn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
>> Yes. I tried this test. It works as expected.
> 
>>     Each LAN8651 received approximately 3Mbps with lot of "Receive buffer
>> overflow error". I think it is expected as the single SPI master has to
>> serve both LAN8651 at the same time and both LAN8651 will be receiving
>> 10Mbps on each.
> 
> Thanks for testing this.
> 
> This also shows the "Receive buffer overflow error" needs to go away.
> Either we don't care at all, and should not enable the interrupt, or
> we do care and should increment a counter.
Thanks for your comments. I think, I would go for your 2nd proposal 
because having "Receive buffer overflow error" enabled will indicate the 
cause of the poor performance.

Already we have,
tc6->netdev->stats.rx_dropped++;
to increment the rx dropped counter in case of receive buffer overflow.

May be we can remove the print,
net_err_ratelimited("%s: Receive buffer overflow error\n", 
tc6->netdev->name);
as it might lead to additional poor performance by adding some delay.

Could you please provide your opinion on this?

Best regards,
Parthiban V
> 
>          Andrew
>