Re: [PATCH 1/2] dt-bindings: hwmon: Document adt7475 PWM initial duty cycle

[Rob Herring (Arm)]

On Thu, 09 May 2024 05:05:42 +1200, Chris Packham wrote:
> Add documentation for the pwm-initial-duty-cycle and
> pwm-initial-frequency properties. These allow the starting state of the
> PWM outputs to be set to cater for hardware designs where undesirable
> amounts of noise is created by the default hardware state.
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/hwmon/adt7475.yaml    | 26 ++++++++++++++++++-
>  1 file changed, 25 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/adt7475.example.dtb: hwmon@2e: adi,pwm-initial-frequency:0:1: 0 is not one of [11, 14, 22, 29, 35, 44, 58, 88, 22500]
	from schema $id: http://devicetree.org/schemas/hwmon/adt7475.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240508170544.263059-2-chris.packham@xxxxxxxxxxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.