[PATCH AUTOSEL 6.6 06/43] ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating

From: Sasha Levin
Date: Tue May 07 2024 - 19:36:25 EST


From: Derek Fang <derek.fang@xxxxxxxxxxx>

[ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ]

The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.

Signed-off-by: Derek Fang <derek.fang@xxxxxxxxxxx>

Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@xxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
sound/soc/codecs/rt5645.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index e0da151508309..b69f6afa0ae40 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -441,6 +441,7 @@ struct rt5645_priv {
struct regmap *regmap;
struct i2c_client *i2c;
struct gpio_desc *gpiod_hp_det;
+ struct gpio_desc *gpiod_cbj_sleeve;
struct snd_soc_jack *hp_jack;
struct snd_soc_jack *mic_jack;
struct snd_soc_jack *btn_jack;
@@ -3183,6 +3184,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2,
RT5645_CBJ_MN_JD, 0);

+ if (rt5645->gpiod_cbj_sleeve)
+ gpiod_set_value(rt5645->gpiod_cbj_sleeve, 1);
+
msleep(600);
regmap_read(rt5645->regmap, RT5645_IN1_CTRL3, &val);
val &= 0x7;
@@ -3199,6 +3203,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
snd_soc_dapm_sync(dapm);
rt5645->jack_type = SND_JACK_HEADPHONE;
+ if (rt5645->gpiod_cbj_sleeve)
+ gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
}
if (rt5645->pdata.level_trigger_irq)
regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
@@ -3226,6 +3232,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
if (rt5645->pdata.level_trigger_irq)
regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV);
+
+ if (rt5645->gpiod_cbj_sleeve)
+ gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
}

return rt5645->jack_type;
@@ -3958,6 +3967,16 @@ static int rt5645_i2c_probe(struct i2c_client *i2c)
return ret;
}

+ rt5645->gpiod_cbj_sleeve = devm_gpiod_get_optional(&i2c->dev, "cbj-sleeve",
+ GPIOD_OUT_LOW);
+
+ if (IS_ERR(rt5645->gpiod_cbj_sleeve)) {
+ ret = PTR_ERR(rt5645->gpiod_cbj_sleeve);
+ dev_info(&i2c->dev, "failed to initialize gpiod, ret=%d\n", ret);
+ if (ret != -ENOENT)
+ return ret;
+ }
+
for (i = 0; i < ARRAY_SIZE(rt5645->supplies); i++)
rt5645->supplies[i].supply = rt5645_supply_names[i];

@@ -4205,6 +4224,9 @@ static void rt5645_i2c_remove(struct i2c_client *i2c)
cancel_delayed_work_sync(&rt5645->jack_detect_work);
cancel_delayed_work_sync(&rt5645->rcclock_work);

+ if (rt5645->gpiod_cbj_sleeve)
+ gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
+
regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies);
}

@@ -4220,6 +4242,9 @@ static void rt5645_i2c_shutdown(struct i2c_client *i2c)
0);
msleep(20);
regmap_write(rt5645->regmap, RT5645_RESET, 0);
+
+ if (rt5645->gpiod_cbj_sleeve)
+ gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
}

static int __maybe_unused rt5645_sys_suspend(struct device *dev)
--
2.43.0