Re: [PATCH RFC RESEND 6/6] iommu/riscv: support nested iommu for flushing cache

[Zong Li]

On Tue, May 7, 2024 at 11:08 PM Jason Gunthorpe <jgg@xxxxxxxx> wrote:
>
> On Tue, May 07, 2024 at 10:26:00PM +0800, Zong Li wrote:
> > This patch implements cache_invalidate_user operation for the userspace
> > to flush the hardware caches for a nested domain through iommufd.
> >
> > Signed-off-by: Zong Li <zong.li@xxxxxxxxxx>
> > ---
> >  drivers/iommu/riscv/iommu.c  | 91 ++++++++++++++++++++++++++++++++++++
> >  include/uapi/linux/iommufd.h |  9 ++++
> >  2 files changed, 100 insertions(+)
> >
> > diff --git a/drivers/iommu/riscv/iommu.c b/drivers/iommu/riscv/iommu.c
> > index 7eda850df475..4dd58fe2242d 100644
> > --- a/drivers/iommu/riscv/iommu.c
> > +++ b/drivers/iommu/riscv/iommu.c
> > @@ -1522,9 +1522,100 @@ static void riscv_iommu_domain_free_nested(struct iommu_domain *domain)
> >       kfree(riscv_domain);
> >  }
> >
> > +static int riscv_iommu_fix_user_cmd(struct riscv_iommu_command *cmd,
> > +                                 unsigned int pscid, unsigned int gscid)
> > +{
> > +     u32 opcode = FIELD_GET(RISCV_IOMMU_CMD_OPCODE, cmd->dword0);
> > +
> > +     switch (opcode) {
> > +     case RISCV_IOMMU_CMD_IOTINVAL_OPCODE:
> > +             u32 func = FIELD_GET(RISCV_IOMMU_CMD_FUNC, cmd->dword0);
> > +
> > +             if (func != RISCV_IOMMU_CMD_IOTINVAL_FUNC_GVMA &&
> > +                 func != RISCV_IOMMU_CMD_IOTINVAL_FUNC_VMA) {
> > +                     pr_warn("The IOTINVAL function: 0x%x is not supported\n",
> > +                             func);
> > +                     return -EOPNOTSUPP;
> > +             }
> > +
> > +             if (func == RISCV_IOMMU_CMD_IOTINVAL_FUNC_GVMA) {
> > +                     cmd->dword0 &= ~RISCV_IOMMU_CMD_FUNC;
> > +                     cmd->dword0 |= FIELD_PREP(RISCV_IOMMU_CMD_FUNC,
> > +                                               RISCV_IOMMU_CMD_IOTINVAL_FUNC_VMA);
> > +             }
> > +
> > +             cmd->dword0 &= ~(RISCV_IOMMU_CMD_IOTINVAL_PSCID |
> > +                              RISCV_IOMMU_CMD_IOTINVAL_GSCID);
> > +             riscv_iommu_cmd_inval_set_pscid(cmd, pscid);
> > +             riscv_iommu_cmd_inval_set_gscid(cmd, gscid);
> > +             break;
> > +     case RISCV_IOMMU_CMD_IODIR_OPCODE:
> > +             /*
> > +              * Ensure the device ID is right. We expect that VMM has
> > +              * transferred the device ID to host's from guest's.
> > +              */
> > +             break;
> > +     default:
> > +             pr_warn("The user command: 0x%x is not supported\n", opcode);
> > +             return -EOPNOTSUPP;
>
> No userspace triggerable warnings.

I don't complete understand about this. Could I know whether we should
suppress the message and return the error directly, or if we should
convert the warning to an error (i.e. pr_err)?

>
> > +static int riscv_iommu_cache_invalidate_user(struct iommu_domain *domain,
> > +                                          struct iommu_user_data_array *array)
> > +{
> > +     struct riscv_iommu_domain *riscv_domain = iommu_domain_to_riscv(domain);
> > +     struct riscv_iommu_device *iommu;
> > +     struct riscv_iommu_bond *bond;
> > +     struct riscv_iommu_command cmd;
> > +     struct iommu_hwpt_riscv_iommu_invalidate inv_info;
> > +     int ret, index;
> > +
> > +     if (!riscv_domain)
> > +             return -EINVAL;
> > +
> > +     /* Assume attached devices in the domain go through the same IOMMU device */
>
> No, you can't assume that.

Do you think that it makes sense to add a riscv_iommu_device structure
in riscv_iommu_domain? Or we might need to add some data structure to
build the mapping of the riscv_iommu_device and riscv_iommu_domain,
then we can get the corresponding riscv_iommu_device by
riscv_iommu_domain?
Thanks

>
> Jason