Re: [PATCH] ptp: clockmatrix: Start comments with '/*'

From: Lee Jones
Date: Tue May 07 2024 - 04:43:49 EST


Subject line should start with:

"mfd: idt8a340_reg: "

On Sat, 04 May 2024, Simon Horman wrote:

> Several comments in idt8a340_reg.h start with '/**',
> which denotes the start of a Kernel doc,
> but are otherwise not Kernel docs.

Some very odd line breaking here.

> Resolve this conflict by starting these comments with '/*' instead.
>
> Flagged by ./scripts/kernel-doc -none
>
> Signed-off-by: Simon Horman <horms@xxxxxxxxxx>
> ---
> include/linux/mfd/idt8a340_reg.h | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/include/linux/mfd/idt8a340_reg.h b/include/linux/mfd/idt8a340_reg.h
> index 0c706085c205..53a222605526 100644
> --- a/include/linux/mfd/idt8a340_reg.h
> +++ b/include/linux/mfd/idt8a340_reg.h
> @@ -61,7 +61,7 @@
> #define HW_Q8_CTRL_SPARE (0xa7d4)
> #define HW_Q11_CTRL_SPARE (0xa7ec)
>
> -/**
> +/*
> * Select FOD5 as sync_trigger for Q8 divider.
> * Transition from logic zero to one
> * sets trigger to sync Q8 divider.
> @@ -70,7 +70,7 @@
> */
> #define Q9_TO_Q8_SYNC_TRIG BIT(1)
>
> -/**
> +/*
> * Enable FOD5 as driver for clock and sync for Q8 divider.
> * Enable fanout buffer for FOD5.
> *
> @@ -78,7 +78,7 @@
> */
> #define Q9_TO_Q8_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK (BIT(0) | BIT(2))
>
> -/**
> +/*
> * Select FOD6 as sync_trigger for Q11 divider.
> * Transition from logic zero to one
> * sets trigger to sync Q11 divider.
> @@ -87,7 +87,7 @@
> */
> #define Q10_TO_Q11_SYNC_TRIG BIT(1)
>
> -/**
> +/*
> * Enable FOD6 as driver for clock and sync for Q11 divider.
> * Enable fanout buffer for FOD6.
> *
>

--
Lee Jones [李琼斯]