Re: [PATCH 10/13] dt-bindings: mfd: pm8008: rework binding

[Krzysztof Kozlowski]

On 06/05/2024 17:08, Johan Hovold wrote:
> Rework the pm8008 binding by dropping internal details like register
> offsets and interrupts and by adding the missing regulator and
> temperature alarm properties.
> 
> Note that child nodes are still used for pinctrl and regulator
> configuration.
> 
> Also note that the pinctrl state definition will be extended later and
> could eventually also be shared with other PMICs (e.g. by breaking out
> bits of qcom,pmic-gpio.yaml).
> 
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/qcom,pm8008.yaml  | 154 ++++++++++--------
>  1 file changed, 90 insertions(+), 64 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> index e1e05921afb4..ac1bab0261b6 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> @@ -19,116 +19,142 @@ properties:
>      const: qcom,pm8008
>  
>    reg:
> -    description:
> -      I2C slave address.

Please split cleanups from actual functional/content rework.

> -
>      maxItems: 1
>  
>    interrupts:
>      maxItems: 1
>  
> -    description: Parent interrupt.
> -
>    reset-gpios:
>      maxItems: 1
>  
> -  "#interrupt-cells":
> +  vdd_l1_l2-supply: true

No underscores in property names.



Best regards,
Krzysztof