Re: [PATCH v2 03/11] dt-bindings: soc: mobileye: add EyeQ OLB system controller

From: Rob Herring (Arm)
Date: Fri May 03 2024 - 11:35:41 EST



On Fri, 03 May 2024 16:20:48 +0200, Théo Lebrun wrote:
> Add documentation to describe the "Other Logic Block" system-controller.
> It deals with three platforms: EyeQ5, EyeQ6L and EyeQ6H. First two have
> a single instance, whereas EyeQ6H has seven named instances.
>
> Features provided are:
> - Clocks, children to main crystal. Some PLLs and divider clocks.
> - Resets. EyeQ6H central, south, DDR0 and DDR1 do not have resets.
> - Pinctrl. Only EyeQ5 has such feature.
>
> Those are NOT the only registers exposed in OLB system-controllers! Many
> individual registers, related to IP block integration, can be found.
>
> We simplify devicetree references to OLB in two ways:
> - Compatibles exposing a single clock do not ask for a index argument.
> - Compatibles exposing a single reset domain do not ask for a domain
> index, only a reset index.
>
> About pinctrl subnodes: all pins have two functionality, either GPIO or
> something-else. The latter is pin dependent, we express constraints
> using many if-then.
>
> Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
> ---
> .../bindings/soc/mobileye/mobileye,eyeq5-olb.yaml | 375 +++++++++++++++++++++
> MAINTAINERS | 2 +
> include/dt-bindings/clock/mobileye,eyeq5-clk.h | 21 ++
> 3 files changed, 398 insertions(+)
>

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/snps,dwmac.yaml: mac-mode: missing type definition

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240503-mbly-olb-v2-3-95ce5a1e18fe@xxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.