Re: [PATCH] mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too

[Ulf Hansson]

On Tue, 30 Apr 2024 at 03:17, Dragan Simic <dsimic@xxxxxxxxxxx> wrote:
>
> Hello Ulf,
>
> Please see my comment below.
>
> On 2024-04-25 15:30, Ulf Hansson wrote:
> > Similar to what has already been changed for eMMC and the
> > MMC_SEND_OP_COND
> > (CMD1), let's convert the SD_APP_OP_COND (ACMD41) for SD cards to use
> > the
> > common __mmc_poll_for_busy() too.
> >
> > This change means the initial delay period, that starts as 10ms will
> > now
> > increase for every loop when being busy. The total accepted timeout for
> > being busy is 1s, which is according to the SD spec.
> >
> > Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> > ---
> >  drivers/mmc/core/sd_ops.c | 77 +++++++++++++++++++++++++--------------
> >  1 file changed, 50 insertions(+), 27 deletions(-)
> >
> > diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
> > index a59cd592f06e..3ce1ff336826 100644
> > --- a/drivers/mmc/core/sd_ops.c
> > +++ b/drivers/mmc/core/sd_ops.c
> > @@ -19,6 +19,15 @@
> >  #include "sd_ops.h"
> >  #include "mmc_ops.h"
> >
> > +#define SD_APP_OP_COND_PERIOD_US     (10 * 1000) /* 10ms */
> > +#define SD_APP_OP_COND_TIMEOUT_MS    1000 /* 1s */
> > +
> > +struct sd_app_op_cond_busy_data {
> > +     struct mmc_host *host;
> > +     u32 ocr;
> > +     struct mmc_command *cmd;
> > +};
> > +
> >  int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
> >  {
> >       int err;
> > @@ -115,10 +124,44 @@ int mmc_app_set_bus_width(struct mmc_card *card,
> > int width)
> >       return mmc_wait_for_app_cmd(card->host, card, &cmd);
> >  }
> >
> > +static int sd_app_op_cond_cb(void *cb_data, bool *busy)
> > +{
> > +     struct sd_app_op_cond_busy_data *data = cb_data;
> > +     struct mmc_host *host = data->host;
> > +     struct mmc_command *cmd = data->cmd;
> > +     u32 ocr = data->ocr;
> > +     int err;
>
> Minor nitpick...  An empty line should be added here, to
> separate the variable definitions from the subsequent code.

Thanks for noticing, I have fixed it when applying!

>
> Otherwise, the patch is looking to me, so please include my
>
> Reviewed-by: Dragan Simic <dsimic@xxxxxxxxxxx>

Thanks!

Kind regards
Uffe


>
> > +     *busy = false;
> > +
> > +     err = mmc_wait_for_app_cmd(host, NULL, cmd);
> > +     if (err)
> > +             return err;
> > +
> > +     /* If we're just probing, do a single pass. */
> > +     if (ocr == 0)
> > +             return 0;
> > +
> > +     /* Wait until reset completes. */
> > +     if (mmc_host_is_spi(host)) {
> > +             if (!(cmd->resp[0] & R1_SPI_IDLE))
> > +                     return 0;
> > +     } else if (cmd->resp[0] & MMC_CARD_BUSY) {
> > +             return 0;
> > +     }
> > +
> > +     *busy = true;
> > +     return 0;
> > +}
> > +
> >  int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
> >  {
> >       struct mmc_command cmd = {};
> > -     int i, err = 0;
> > +     struct sd_app_op_cond_busy_data cb_data = {
> > +             .host = host,
> > +             .ocr = ocr,
> > +             .cmd = &cmd
> > +     };
> > +     int err;
> >
> >       cmd.opcode = SD_APP_OP_COND;
> >       if (mmc_host_is_spi(host))
> > @@ -127,36 +170,16 @@ int mmc_send_app_op_cond(struct mmc_host *host,
> > u32 ocr, u32 *rocr)
> >               cmd.arg = ocr;
> >       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
> >
> > -     for (i = 100; i; i--) {
> > -             err = mmc_wait_for_app_cmd(host, NULL, &cmd);
> > -             if (err)
> > -                     break;
> > -
> > -             /* if we're just probing, do a single pass */
> > -             if (ocr == 0)
> > -                     break;
> > -
> > -             /* otherwise wait until reset completes */
> > -             if (mmc_host_is_spi(host)) {
> > -                     if (!(cmd.resp[0] & R1_SPI_IDLE))
> > -                             break;
> > -             } else {
> > -                     if (cmd.resp[0] & MMC_CARD_BUSY)
> > -                             break;
> > -             }
> > -
> > -             err = -ETIMEDOUT;
> > -
> > -             mmc_delay(10);
> > -     }
> > -
> > -     if (!i)
> > -             pr_err("%s: card never left busy state\n", mmc_hostname(host));
> > +     err = __mmc_poll_for_busy(host, SD_APP_OP_COND_PERIOD_US,
> > +                               SD_APP_OP_COND_TIMEOUT_MS, &sd_app_op_cond_cb,
> > +                               &cb_data);
> > +     if (err)
> > +             return err;
> >
> >       if (rocr && !mmc_host_is_spi(host))
> >               *rocr = cmd.resp[0];
> >
> > -     return err;
> > +     return 0;
> >  }
> >
> >  static int __mmc_send_if_cond(struct mmc_host *host, u32 ocr, u8
> > pcie_bits,