Re: [PATCH v4 0/5] Add RK816 PMIC support

From: Lee Jones
Date: Fri May 03 2024 - 04:17:52 EST


On Tue, 16 Apr 2024 18:12:32 +0200, Alex Bee wrote:
> This series aims to add support for Rockchip RK816 PMIC series. As per
> datasheet it's targeted for RK3126/RK3128 (RK816-1), RK1108 (RK816-2) and
> PX3-SE (RK816-3) but might be used for other SoCs as well. The MFD consists
> of an integrated RTC, a GPIO controller, two 32k clock outputs, a power
> key, 3 buck- and 6 ldo regulators, 3 regulator-switches, and charger with
> integrated fuel gauge. Charger and fuel gauge are not part of this series.
> Two of the switches (otg/boost) are part of the binding, but not of
> the driver. They must only ever be enabled if no battery charging is
> happening, but it will be enabled automatically if a battery is attached
> and an external power source is connected. Thus that needs some
> incorporation of a yet to be added charger driver.
> Integration in the existing rk8xx-infrastructure was pretty straightforward
> and only needed very little tweaking. In order to not further bloat the
> driver(s) too much with additional `#define`s I tried to re-use existing
> ones wherever possible.
>
> [...]

Applied, thanks!

[1/5] dt-bindings: mfd: Add rk816 binding
commit: 06dfb41b1cf8d64327e5c4391e165f466506c4f0
[2/5] mfd: rk8xx: Add RK816 support
commit: e9006f81faf8e438ea83626db578610e49f31576
[3/5] pinctrl: rk805: Add rk816 pinctrl support
commit: 1bd97d64b5f0c01d03ecc9473ccfcf180dbbf54a
[4/5] regulator: rk808: Support apply_bit for rk808_set_suspend_voltage_range
commit: 9f4e899c286b5127e2443d50e37ee2112efbfa2c
[5/5] regulator: rk808: Add RK816 support
commit: 5eb068da74a0b443fb99a89d9e5062691649c470

--
Lee Jones [李琼斯]