Re: [PATCH 2/2] arm64: dts: ti: k3-j784s4-evm: Enable USB3 support

[Ravi Gunasekaran]

Roger, Rob

On 5/3/24 12:18 PM, Roger Quadros wrote:
> 
> 
> On 02/05/2024 08:36, Ravi Gunasekaran wrote:
>> From: Matt Ranostay <mranostay@xxxxxx>
>>
>> The board uses SERDES0 Lane 3 for USB3 IP. So update the
>> SerDes lane info for USB. Add the pin mux data and
>> enable USB3 support.
>>
>> Signed-off-by: Matt Ranostay <mranostay@xxxxxx>
>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
>> ---
>>  arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 41 ++++++++++++++++++++++++
>>  1 file changed, 41 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>> index d511b25d62e3..bee73dab803d 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>> @@ -336,6 +336,13 @@
>>  			J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */
>>  		>;
>>  	};
>> +
>> +	main_usbss0_pins_default: main-usbss0-pins-default {
> 
> Should be main-usbss0-default-pins
> 
> This should fix the checkpatch warning.
> 

I will fix and send a v2

[...]

-- 
Regards,
Ravi