Re: [PATCH v2 2/4] regulator: rtq2208: Fix LDO to be compatible with both fixed and adjustable vout

[Alina Yu]

On Wed, May 01, 2024 at 11:19:05AM +0900, Mark Brown wrote:
> On Tue, Apr 30, 2024 at 05:58:25PM +0800, Alina Yu wrote:
> 
> > In this patch, LDO's adjustable and fixed Vout settings are compatible.
> > The LDO Vout ability depends on the init_data->constraints.
> > If adjustable, the Vout can be set to either 1800mV or 3300mV.
> 
> > +		if (init_data->constraints.min_uV == init_data->constraints.max_uV) {
> > +			desc->n_voltages = 1;
> > +			desc->fixed_uV = init_data->constraints.min_uV;
> > +			desc->ops = &rtq2208_regulator_ldo_fix_ops;
> > +		} else {
> > +			desc->n_voltages = ARRAY_SIZE(rtq2208_ldo_volt_table);
> > +			desc->volt_table = rtq2208_ldo_volt_table;
> > +			desc->ops = &rtq2208_regulator_ldo_adj_ops;
> > +		}
> 
> Why are you making this change?  The operations supported by the
> regulator don't change depending on if the system is going to chnage the
> voltage.

The change is necessary due to the requirement of the SD card for high/default and ultra-high-speed modes. The system needs to adjust the LDO Vout accordingly.
In ultra-high-speed mode, the LDO Vout needs to be adjusted to 1.8V; otherwise, it will remain at 1.8V.


Thanks,
Alina