Re: [PATCH net] net: dsa: mt7530: trap link-local frames regardless of ST Port State
From: Daniel Golle
Date: Mon Apr 08 2024 - 22:08:38 EST
On Sun, Apr 07, 2024 at 09:11:11PM +0300, Arınç ÜNAL via B4 Relay wrote:
> From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
>
> In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer
> (DLL) of the Open Systems Interconnection basic reference model (OSI/RM)
> are described; the medium access control (MAC) and logical link control
> (LLC) sublayers. The MAC sublayer is the one facing the physical layer.
>
> In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A
> Bridge component comprises a MAC Relay Entity for interconnecting the Ports
> of the Bridge, at least two Ports, and higher layer entities with at least
> a Spanning Tree Protocol Entity included.
>
> Each Bridge Port also functions as an end station and shall provide the MAC
> Service to an LLC Entity. Each instance of the MAC Service is provided to a
> distinct LLC Entity that supports protocol identification, multiplexing,
> and demultiplexing, for protocol data unit (PDU) transmission and reception
> by one or more higher layer entities.
>
> It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC
> Entity associated with each Bridge Port is modeled as being directly
> connected to the attached Local Area Network (LAN).
>
> On the switch with CPU port architecture, CPU port functions as Management
> Port, and the Management Port functionality is provided by software which
> functions as an end station. Software is connected to an IEEE 802 LAN that
> is wholly contained within the system that incorporates the Bridge.
> Software provides access to the LLC Entity associated with each Bridge Port
> by the value of the source port field on the special tag on the frame
> received by software.
>
> We call frames that carry control information to determine the active
> topology and current extent of each Virtual Local Area Network (VLAN),
> i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN
> Registration Protocol Data Units (MVRPDUs), and frames from other link
> constrained protocols, such as Extensible Authentication Protocol over LAN
> (EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They
> are not forwarded by a Bridge. Permanently configured entries in the
> filtering database (FDB) ensure that such frames are discarded by the
> Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in
> detail:
>
> Each of the reserved MAC addresses specified in Table 8-1
> (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be
> permanently configured in the FDB in C-VLAN components and ERs.
>
> Each of the reserved MAC addresses specified in Table 8-2
> (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently
> configured in the FDB in S-VLAN components.
>
> Each of the reserved MAC addresses specified in Table 8-3
> (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB
> in TPMR components.
>
> The FDB entries for reserved MAC addresses shall specify filtering for all
> Bridge Ports and all VIDs. Management shall not provide the capability to
> modify or remove entries for reserved MAC addresses.
>
> The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of
> propagation of PDUs within a Bridged Network, as follows:
>
> The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that
> no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN)
> component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward.
> PDUs transmitted using this destination address, or any other addresses
> that appear in Table 8-1, Table 8-2, and Table 8-3
> (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can
> therefore travel no further than those stations that can be reached via a
> single individual LAN from the originating station.
>
> The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an
> address that no conformant S-VLAN component, C-VLAN component, or MAC
> Bridge can forward; however, this address is relayed by a TPMR component.
> PDUs using this destination address, or any of the other addresses that
> appear in both Table 8-1 and Table 8-2 but not in Table 8-3
> (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed
> by any TPMRs but will propagate no further than the nearest S-VLAN
> component, C-VLAN component, or MAC Bridge.
>
> The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an
> address that no conformant C-VLAN component, MAC Bridge can forward;
> however, it is relayed by TPMR components and S-VLAN components. PDUs
> using this destination address, or any of the other addresses that appear
> in Table 8-1 but not in either Table 8-2 or Table 8-3
> (01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and
> S-VLAN components but will propagate no further than the nearest C-VLAN
> component or MAC Bridge.
>
> Because the LLC Entity associated with each Bridge Port is provided via CPU
> port, we must not filter these frames but forward them to CPU port.
>
> In a Bridge, the transmission Port is majorly decided by ingress and egress
> rules, FDB, and spanning tree Port State functions of the Forwarding
> Process. For link-local frames, only CPU port should be designated as
> destination port in the FDB, and the other functions of the Forwarding
> Process must not interfere with the decision of the transmission Port. We
> call this process trapping frames to CPU port.
>
> Therefore, on the switch with CPU port architecture, link-local frames must
> be trapped to CPU port, and certain link-local frames received by a Port of
> a Bridge comprising a TPMR component or an S-VLAN component must be
> excluded from it.
>
> A Bridge of the switch with CPU architecture cannot comprise a non-Two-Port
> MAC Relay (TPMR) component as TPMR component is only supposed to support a
> subset of the functionality of a MAC Bridge. A Bridge comprising two ports
> (Management Port doesn't count) of this architecture will either function
> as a standard MAC Bridge or a standard VLAN Bridge.
>
> Therefore, a Bridge of this architecture can only comprise S-VLAN
> components, C-VLAN components, or MAC Bridge components. Since there's no
> TPMR component, we don't need to relay PDUs using the destination addresses
> specified on the Nearest non-TPMR section, and the proportion of the
> Nearest Customer Bridge section where they must be relayed by TPMR
> components.
>
> One option to trap link-local frames to CPU port is to add static FDB
> entries with CPU port designated as destination port. However, because that
> Independent VLAN Learning (IVL) is being used on every VID, each entry only
> applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC
> Bridge component or a C-VLAN component, there would have to be 16 times
> 4096 entries. This switch intellectual property can only hold a maximum of
> 2048 entries. Using this option, there also isn't a mechanism to prevent
> link-local frames from being discarded when the spanning tree Port State of
> the reception Port is discarding.
>
> The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4
> registers. Whilst this applies to every VID, it doesn't contain all of the
> reserved MAC addresses without affecting the remaining Standard Group MAC
> Addresses. The REV_UN frame tag utilised using the RGAC4 register covers
> the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination
> addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF
> destination addresses which may be relayed by MAC Bridges or VLAN Bridges.
> The latter option provides better but not complete conformance.
>
> This switch intellectual property also does not provide a mechanism to trap
> link-local frames with specific destination addresses to CPU port by
> Bridge, to conform to the filtering rules for the distinct Bridge
> components.
>
> Therefore, regardless of the type of the Bridge component, link-local
> frames with these destination addresses will be trapped to CPU port:
>
> 01-80-C2-00-00-[00,01,02,03,0E]
>
> In a Bridge comprising a MAC Bridge component or a C-VLAN component:
>
> Link-local frames with these destination addresses won't be trapped to
> CPU port which won't conform to IEEE Std 802.1Q-2022:
>
> 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]
>
> In a Bridge comprising an S-VLAN component:
>
> Link-local frames with these destination addresses will be trapped to CPU
> port which won't conform to IEEE Std 802.1Q-2022:
>
> 01-80-C2-00-00-00
>
> Link-local frames with these destination addresses won't be trapped to
> CPU port which won't conform to IEEE Std 802.1Q-2022:
>
> 01-80-C2-00-00-[04,05,06,07,08,09,0A]
>
> Currently on this switch intellectual property, if the spanning tree Port
> State of the reception Port is discarding, link-local frames will be
> discarded.
>
> To trap link-local frames regardless of the spanning tree Port State, make
> the switch regard them as BPDU. This switch intellectual property only lets
> the frames regarded as BPDU bypass the spanning tree Port State function of
> the Forwarding Process.
>
> With this change, the only remaining interference left is the ingress
> rules. When the reception Port has no PVID assigned on software,
> VLAN-untagged frames won't be allowed in. There doesn't seem to be a
> mechanism on the switch intellectual property to have link-local frames
> bypass this function of the Forwarding Process.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
Reviewed-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
Thank you for the excellent write up!
> ---
> drivers/net/dsa/mt7530.c | 229 ++++++++++++++++++++++++++++++++++++++++-------
> drivers/net/dsa/mt7530.h | 5 ++
> 2 files changed, 200 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 1035820c2377..254501f63731 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -950,20 +950,173 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
> mutex_unlock(&priv->reg_mutex);
> }
>
> -/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std
> - * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA
> - * must only be propagated to C-VLAN and MAC Bridge components. That means
> - * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
> - * these frames are supposed to be processed by the CPU (software). So we make
> - * the switch only forward them to the CPU port. And if received from a CPU
> - * port, forward to a single port. The software is responsible of making the
> - * switch conform to the latter by setting a single port as destination port on
> - * the special tag.
> +/* In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL)
> + * of the Open Systems Interconnection basic reference model (OSI/RM) are
> + * described; the medium access control (MAC) and logical link control (LLC)
> + * sublayers. The MAC sublayer is the one facing the physical layer.
> *
> - * This switch intellectual property cannot conform to this part of the standard
> - * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC
> - * DAs, it also includes :22-FF which the scope of propagation is not supposed
> - * to be restricted for these MAC DAs.
> + * In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A
> + * Bridge component comprises a MAC Relay Entity for interconnecting the Ports
> + * of the Bridge, at least two Ports, and higher layer entities with at least a
> + * Spanning Tree Protocol Entity included.
> + *
> + * Each Bridge Port also functions as an end station and shall provide the MAC
> + * Service to an LLC Entity. Each instance of the MAC Service is provided to a
> + * distinct LLC Entity that supports protocol identification, multiplexing, and
> + * demultiplexing, for protocol data unit (PDU) transmission and reception by
> + * one or more higher layer entities.
> + *
> + * It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC
> + * Entity associated with each Bridge Port is modeled as being directly
> + * connected to the attached Local Area Network (LAN).
> + *
> + * On the switch with CPU port architecture, CPU port functions as Management
> + * Port, and the Management Port functionality is provided by software which
> + * functions as an end station. Software is connected to an IEEE 802 LAN that is
> + * wholly contained within the system that incorporates the Bridge. Software
> + * provides access to the LLC Entity associated with each Bridge Port by the
> + * value of the source port field on the special tag on the frame received by
> + * software.
> + *
> + * We call frames that carry control information to determine the active
> + * topology and current extent of each Virtual Local Area Network (VLAN), i.e.,
> + * spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration
> + * Protocol Data Units (MVRPDUs), and frames from other link constrained
> + * protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and
> + * Link Layer Discovery Protocol (LLDP), link-local frames. They are not
> + * forwarded by a Bridge. Permanently configured entries in the filtering
> + * database (FDB) ensure that such frames are discarded by the Forwarding
> + * Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail:
> + *
> + * Each of the reserved MAC addresses specified in Table 8-1
> + * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be
> + * permanently configured in the FDB in C-VLAN components and ERs.
> + *
> + * Each of the reserved MAC addresses specified in Table 8-2
> + * (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently
> + * configured in the FDB in S-VLAN components.
> + *
> + * Each of the reserved MAC addresses specified in Table 8-3
> + * (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in
> + * TPMR components.
> + *
> + * The FDB entries for reserved MAC addresses shall specify filtering for all
> + * Bridge Ports and all VIDs. Management shall not provide the capability to
> + * modify or remove entries for reserved MAC addresses.
> + *
> + * The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of
> + * propagation of PDUs within a Bridged Network, as follows:
> + *
> + * The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no
> + * conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN)
> + * component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward.
> + * PDUs transmitted using this destination address, or any other addresses
> + * that appear in Table 8-1, Table 8-2, and Table 8-3
> + * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can
> + * therefore travel no further than those stations that can be reached via a
> + * single individual LAN from the originating station.
> + *
> + * The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an
> + * address that no conformant S-VLAN component, C-VLAN component, or MAC
> + * Bridge can forward; however, this address is relayed by a TPMR component.
> + * PDUs using this destination address, or any of the other addresses that
> + * appear in both Table 8-1 and Table 8-2 but not in Table 8-3
> + * (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by
> + * any TPMRs but will propagate no further than the nearest S-VLAN component,
> + * C-VLAN component, or MAC Bridge.
> + *
> + * The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address
> + * that no conformant C-VLAN component, MAC Bridge can forward; however, it is
> + * relayed by TPMR components and S-VLAN components. PDUs using this
> + * destination address, or any of the other addresses that appear in Table 8-1
> + * but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]),
> + * will be relayed by TPMR components and S-VLAN components but will propagate
> + * no further than the nearest C-VLAN component or MAC Bridge.
> + *
> + * Because the LLC Entity associated with each Bridge Port is provided via CPU
> + * port, we must not filter these frames but forward them to CPU port.
> + *
> + * In a Bridge, the transmission Port is majorly decided by ingress and egress
> + * rules, FDB, and spanning tree Port State functions of the Forwarding Process.
> + * For link-local frames, only CPU port should be designated as destination port
> + * in the FDB, and the other functions of the Forwarding Process must not
> + * interfere with the decision of the transmission Port. We call this process
> + * trapping frames to CPU port.
> + *
> + * Therefore, on the switch with CPU port architecture, link-local frames must
> + * be trapped to CPU port, and certain link-local frames received by a Port of a
> + * Bridge comprising a TPMR component or an S-VLAN component must be excluded
> + * from it.
> + *
> + * A Bridge of the switch with CPU architecture cannot comprise a non-Two-Port
> + * MAC Relay (TPMR) component as TPMR component is only supposed to support a
> + * subset of the functionality of a MAC Bridge. A Bridge comprising two ports
> + * (Management Port doesn't count) of this architecture will either function as
> + * a standard MAC Bridge or a standard VLAN Bridge.
> + *
> + * Therefore, a Bridge of this architecture can only comprise S-VLAN components,
> + * C-VLAN components, or MAC Bridge components. Since there's no TPMR component,
> + * we don't need to relay PDUs using the destination addresses specified on the
> + * Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge
> + * section where they must be relayed by TPMR components.
> + *
> + * One option to trap link-local frames to CPU port is to add static FDB entries
> + * with CPU port designated as destination port. However, because that
> + * Independent VLAN Learning (IVL) is being used on every VID, each entry only
> + * applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC
> + * Bridge component or a C-VLAN component, there would have to be 16 times 4096
> + * entries. This switch intellectual property can only hold a maximum of 2048
> + * entries. Using this option, there also isn't a mechanism to prevent
> + * link-local frames from being discarded when the spanning tree Port State of
> + * the reception Port is discarding.
> + *
> + * The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4
> + * registers. Whilst this applies to every VID, it doesn't contain all of the
> + * reserved MAC addresses without affecting the remaining Standard Group MAC
> + * Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the
> + * remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination
> + * addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF
> + * destination addresses which may be relayed by MAC Bridges or VLAN Bridges.
> + * The latter option provides better but not complete conformance.
> + *
> + * This switch intellectual property also does not provide a mechanism to trap
> + * link-local frames with specific destination addresses to CPU port by Bridge,
> + * to conform to the filtering rules for the distinct Bridge components.
> + *
> + * Therefore, regardless of the type of the Bridge component, link-local frames
> + * with these destination addresses will be trapped to CPU port:
> + *
> + * 01-80-C2-00-00-[00,01,02,03,0E]
> + *
> + * In a Bridge comprising a MAC Bridge component or a C-VLAN component:
> + *
> + * Link-local frames with these destination addresses won't be trapped to CPU
> + * port which won't conform to IEEE Std 802.1Q-2022:
> + *
> + * 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]
> + *
> + * In a Bridge comprising an S-VLAN component:
> + *
> + * Link-local frames with these destination addresses will be trapped to CPU
> + * port which won't conform to IEEE Std 802.1Q-2022:
> + *
> + * 01-80-C2-00-00-00
> + *
> + * Link-local frames with these destination addresses won't be trapped to CPU
> + * port which won't conform to IEEE Std 802.1Q-2022:
> + *
> + * 01-80-C2-00-00-[04,05,06,07,08,09,0A]
> + *
> + * To trap link-local frames to CPU port as conformant as this switch
> + * intellectual property can allow, link-local frames are made to be regarded as
> + * BPDU. This is because this switch intellectual property only lets the frames
> + * regarded as BPDU bypass the spanning tree Port State function of the
> + * Forwarding Process.
> + *
> + * The only remaining interference left is the ingress rules. When the reception
> + * Port has no PVID assigned on software, VLAN-untagged frames won't be allowed
> + * in. There doesn't seem to be a mechanism on the switch intellectual property
> + * to have link-local frames bypass this function of the Forwarding Process.
> */
> static void
> mt753x_trap_frames(struct mt7530_priv *priv)
> @@ -971,35 +1124,43 @@ mt753x_trap_frames(struct mt7530_priv *priv)
> /* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them
> * VLAN-untagged.
> */
> - mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_EG_TAG_MASK |
> - MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
> - MT753X_BPDU_PORT_FW_MASK,
> - MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> - MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
> - MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> - MT753X_BPDU_CPU_ONLY);
> + mt7530_rmw(priv, MT753X_BPC,
> + MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
> + MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
> + MT753X_BPDU_PORT_FW_MASK,
> + MT753X_PAE_BPDU_FR |
> + MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> + MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
> + MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> + MT753X_BPDU_CPU_ONLY);
>
> /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
> * them VLAN-untagged.
> */
> - mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK |
> - MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK |
> - MT753X_R01_PORT_FW_MASK,
> - MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> - MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
> - MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> - MT753X_BPDU_CPU_ONLY);
> + mt7530_rmw(priv, MT753X_RGAC1,
> + MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
> + MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
> + MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
> + MT753X_R02_BPDU_FR |
> + MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> + MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
> + MT753X_R01_BPDU_FR |
> + MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> + MT753X_BPDU_CPU_ONLY);
>
> /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
> * them VLAN-untagged.
> */
> - mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK |
> - MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK |
> - MT753X_R03_PORT_FW_MASK,
> - MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> - MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
> - MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> - MT753X_BPDU_CPU_ONLY);
> + mt7530_rmw(priv, MT753X_RGAC2,
> + MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
> + MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
> + MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
> + MT753X_R0E_BPDU_FR |
> + MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> + MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
> + MT753X_R03_BPDU_FR |
> + MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
> + MT753X_BPDU_CPU_ONLY);
> }
>
> static void
> diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
> index d17b318e6ee4..2deffe741484 100644
> --- a/drivers/net/dsa/mt7530.h
> +++ b/drivers/net/dsa/mt7530.h
> @@ -65,6 +65,7 @@ enum mt753x_id {
>
> /* Registers for BPDU and PAE frame control*/
> #define MT753X_BPC 0x24
> +#define MT753X_PAE_BPDU_FR BIT(25)
> #define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22)
> #define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
> #define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16)
> @@ -75,20 +76,24 @@ enum mt753x_id {
>
> /* Register for :01 and :02 MAC DA frame control */
> #define MT753X_RGAC1 0x28
> +#define MT753X_R02_BPDU_FR BIT(25)
> #define MT753X_R02_EG_TAG_MASK GENMASK(24, 22)
> #define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
> #define MT753X_R02_PORT_FW_MASK GENMASK(18, 16)
> #define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
> +#define MT753X_R01_BPDU_FR BIT(9)
> #define MT753X_R01_EG_TAG_MASK GENMASK(8, 6)
> #define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
> #define MT753X_R01_PORT_FW_MASK GENMASK(2, 0)
>
> /* Register for :03 and :0E MAC DA frame control */
> #define MT753X_RGAC2 0x2c
> +#define MT753X_R0E_BPDU_FR BIT(25)
> #define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22)
> #define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
> #define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16)
> #define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
> +#define MT753X_R03_BPDU_FR BIT(9)
> #define MT753X_R03_EG_TAG_MASK GENMASK(8, 6)
> #define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
> #define MT753X_R03_PORT_FW_MASK GENMASK(2, 0)
>
> ---
> base-commit: 365af7ace014ef3fc6f5d0a373c96cc7193db4ce
> change-id: 20240401-b4-for-net-mt7530-fix-link-local-when-stp-discarding-6e2a4e3e867a
>
> Best regards,
> --
> Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
>
>
>