Re: [PATCH v2 10/12] pinctrl: samsung: add exynosautov920 pinctrl

[Krzysztof Kozlowski]

On 15/11/2023 10:56, Jaewon Kim wrote:
> ExynosAutov920 GPIO has a different register structure.
> In the existing Exynos series, EINT control register enumerated after
> a specific offset (e.g EXYNOS_GPIO_ECON_OFFSET).
> However, in ExynosAutov920 SoC, the register that controls EINT belongs
> to each GPIO group, and each GPIO group has 0x1000 align.
> 
> This is a structure to protect the GPIO group with S2MPU in VM environment,
> and will only be applied in ExynosAuto series SoCs.
> 
> Example)
> -------------------------------------------------
> | original		| ExynosAutov920	|
> |-----------------------------------------------|
> | 0x0	GPIO_CON	| 0x0	GPIO_CON	|
> | 0x4	GPIO_DAT	| 0x4	GPIO_DAT	|
> | 0x8	GPIO_PUD	| 0x8	GPIO_PUD	|
> | 0xc	GPIO_DRV	| 0xc	GPIO_DRV	|
> | 0x700	EINT_CON	| 0x18	EINT_CON	|
> | 0x800	EINT_FLTCON	| 0x1c	EINT_FLTCON0	|
> | 0x900	EINT_MASK	| 0x20	EINT_FLTCON1	|
> | 0xa00	EINT_PEND	| 0x24	EINT_MASK	|
> |			| 0x28	EINT_PEND	|
> -------------------------------------------------
> 
> Pinctrl data for ExynosAutoV920 SoC.
>  - GPA0,GPA1 (10): External wake up interrupt
>  - GPQ0 (2): SPMI (PMIC I/F)
>  - GPB0,GPB1,GPB2,GPB3,GPB4,GPB5,GPB6 (47): I2S Audio
>  - GPH0,GPH1,GPH2,GPH3,GPH4,GPH5,GPH6,GPH8 (49): PCIE, UFS, Ethernet
>  - GPG0,GPG1,GPG2,GPG3,GPG4,GPG5 (29): General purpose
>  - GPP0,GPP1,GPP2,GPP3,GPP4,GPP5,GPP6,GPP7,GPP8,GPP9,GPP10 (77): USI
> 
> Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
> ---
>  .../pinctrl/samsung/pinctrl-exynos-arm64.c    | 140 ++++++++++++++++++
>  drivers/pinctrl/samsung/pinctrl-exynos.c      | 102 ++++++++++++-
>  drivers/pinctrl/samsung/pinctrl-exynos.h      |  27 ++++
>  drivers/pinctrl/samsung/pinctrl-samsung.c     |   5 +
>  drivers/pinctrl/samsung/pinctrl-samsung.h     |  13 ++
>  5 files changed, 280 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> index cb965cf93705..cf86722a70a3 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> @@ -796,3 +796,143 @@ const struct samsung_pinctrl_of_match_data fsd_of_data __initconst = {
>  	.ctrl		= fsd_pin_ctrl,
>  	.num_ctrl	= ARRAY_SIZE(fsd_pin_ctrl),
>  };
> +
> +/* pin banks of exynosautov920 pin-controller 0 (ALIVE) */
> +static struct samsung_pin_bank_data exynosautov920_pin_banks0[] = {

So you created patch from some downstream code? No, please work on
upstream. Take upstream code and customize it to your needs. That way
you won't introduce same mistakes fixes years ago.

Missing const.

...

> @@ -31,6 +31,7 @@
>  #define EXYNOS7_WKUP_EMASK_OFFSET	0x900
>  #define EXYNOS7_WKUP_EPEND_OFFSET	0xA00
>  #define EXYNOS_SVC_OFFSET		0xB08
> +#define EXYNOSAUTOV920_SVC_OFFSET	0xF008
>  

...

>  #ifdef CONFIG_PINCTRL_S3C64XX
>  	{ .compatible = "samsung,s3c64xx-pinctrl",
> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
> index 9b3db50adef3..cbb78178651b 100644
> --- a/drivers/pinctrl/samsung/pinctrl-samsung.h
> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
> @@ -122,6 +122,9 @@ struct samsung_pin_bank_type {
>   * @eint_type: type of the external interrupt supported by the bank.
>   * @eint_mask: bit mask of pins which support EINT function.
>   * @eint_offset: SoC-specific EINT register or interrupt offset of bank.
> + * @mask_offset: SoC-specific EINT mask register offset of bank.
> + * @pend_offset: SoC-specific EINT pend register offset of bank.
> + * @combine: EINT register is adjacent to the GPIO control register.

I don't understand it. Adjacent? Are you sure? GPIO control register has
0xF004 (EXYNOSAUTOV920_SVC_OFFSET + 0x4)? Anyway, this does not scale.
What if next revision comes with not-adjacent. There will be
"combine_plus"? Also name confuses me - combine means together.

Also your first map of registers does not have it adjacent...

Anyway first patch is to rework driver to support new register layout.
Second patch is to add new variant.

Best regards,
Krzysztof