Re: [RFC v1 3/8] vhost: Add 3 new uapi to support iommufd
From: Cindy Lu
Date: Fri Nov 10 2023 - 13:10:29 EST
Jason Wang <jasowang@xxxxxxxxxx> 于2023年11月10日周五 10:32写道:
>
> On Wed, Nov 8, 2023 at 3:09 PM Jason Wang <jasowang@xxxxxxxxxx> wrote:
> >
> > On Wed, Nov 8, 2023 at 2:39 PM Cindy Lu <lulu@xxxxxxxxxx> wrote:
> > >
> > > On Wed, Nov 8, 2023 at 11:03 AM Jason Wang <jasowang@xxxxxxxxxx> wrote:
> > > >
> > > > On Tue, Nov 7, 2023 at 2:57 PM Cindy Lu <lulu@xxxxxxxxxx> wrote:
> > > > >
> > > > > On Mon, Nov 6, 2023 at 3:30 PM Jason Wang <jasowang@xxxxxxxxxx> wrote:
> > > > > >
> > > > > > On Sat, Nov 4, 2023 at 1:17 AM Cindy Lu <lulu@xxxxxxxxxx> wrote:
> > > > > > >
> > > > > > > VHOST_VDPA_SET_IOMMU_FD: bind the device to iommufd device
> > > > > > >
> > > > > > > VDPA_DEVICE_ATTACH_IOMMUFD_AS: Attach a vdpa device to an iommufd
> > > > > > > address space specified by IOAS id.
> > > > > > >
> > > > > > > VDPA_DEVICE_DETACH_IOMMUFD_AS: Detach a vdpa device
> > > > > > > from the iommufd address space
> > > > > > >
> > > > > > > Signed-off-by: Cindy Lu <lulu@xxxxxxxxxx>
> > > > > > > ---
> > > > > >
> > > > > > [...]
> > > > > >
> > > > > > > diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
> > > > > > > index f5c48b61ab62..07e1b2c443ca 100644
> > > > > > > --- a/include/uapi/linux/vhost.h
> > > > > > > +++ b/include/uapi/linux/vhost.h
> > > > > > > @@ -219,4 +219,70 @@
> > > > > > > */
> > > > > > > #define VHOST_VDPA_RESUME _IO(VHOST_VIRTIO, 0x7E)
> > > > > > >
> > > > > > > +/* vhost_vdpa_set_iommufd
> > > > > > > + * Input parameters:
> > > > > > > + * @iommufd: file descriptor from /dev/iommu; pass -1 to unset
> > > > > > > + * @iommufd_ioasid: IOAS identifier returned from ioctl(IOMMU_IOAS_ALLOC)
> > > > > > > + * Output parameters:
> > > > > > > + * @out_dev_id: device identifier
> > > > > > > + */
> > > > > > > +struct vhost_vdpa_set_iommufd {
> > > > > > > + __s32 iommufd;
> > > > > > > + __u32 iommufd_ioasid;
> > > > > > > + __u32 out_dev_id;
> > > > > > > +};
> > > > > > > +
> > > > > > > +#define VHOST_VDPA_SET_IOMMU_FD \
> > > > > > > + _IOW(VHOST_VIRTIO, 0x7F, struct vhost_vdpa_set_iommufd)
> > > > > > > +
> > > > > > > +/*
> > > > > > > + * VDPA_DEVICE_ATTACH_IOMMUFD_AS -
> > > > > > > + * _IOW(VHOST_VIRTIO, 0x7f, struct vdpa_device_attach_iommufd_as)
> > > > > > > + *
> > > > > > > + * Attach a vdpa device to an iommufd address space specified by IOAS
> > > > > > > + * id.
> > > > > > > + *
> > > > > > > + * Available only after a device has been bound to iommufd via
> > > > > > > + * VHOST_VDPA_SET_IOMMU_FD
> > > > > > > + *
> > > > > > > + * Undo by VDPA_DEVICE_DETACH_IOMMUFD_AS or device fd close.
> > > > > > > + *
> > > > > > > + * @argsz: user filled size of this data.
> > > > > > > + * @flags: must be 0.
> > > > > > > + * @ioas_id: Input the target id which can represent an ioas
> > > > > > > + * allocated via iommufd subsystem.
> > > > > > > + *
> > > > > > > + * Return: 0 on success, -errno on failure.
> > > > > > > + */
> > > > > > > +struct vdpa_device_attach_iommufd_as {
> > > > > > > + __u32 argsz;
> > > > > > > + __u32 flags;
> > > > > > > + __u32 ioas_id;
> > > > > > > +};
> > > > > >
> > > > > > I think we need to map ioas to vDPA AS, so there should be an ASID
> > > > > > from the view of vDPA?
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > The qemu will have a structure save and maintain this information,So
> > > > > I didn't add this
> > > > > in kernel,we can add this but maybe only for check?
> > > >
> > > > I meant for example, a simulator has two AS. How can we attach an ioas
> > > > to a specific AS with the above uAPI?
> > > >
> > > > Thank>
> > > this __u32 ioas_id here is alloc from the iommufd system. maybe I
> > > need to change to new name iommuds_asid to
> > > make this more clear
> > > the process in qemu is
> > >
> > > 1) qemu want to use AS 0 (for example)
> > > 2) checking the existing asid. the asid 0 not used before
> > > 3 )alloc new asid from iommufd system, get new ioas_id (maybe 3 for example)
> > > qemu will save this relation 3<-->0 in the driver.
> > > 4) setting the ioctl VDPA_DEVICE_ATTACH_IOMMUFD_AS to attach new ASID
> > > to the kernel
> >
> > So if we want to map IOMMUFD AS 3 to VDPA AS 0, how can it be done?
> >
> > For example I didn't see a vDPA AS parameter in the above uAPI.
> >
> > vhost_vdpa_set_iommufd has iommufd_ioasid which is obviously not the vDPA AS.
> >
> > And ioas_id of vdpa_device_attach_iommufd_as (as you explained above)
> > is not vDPA AS.
>
> For example, the simulator/mlx5e has two ASes. It needs to know the
> mapping between vDPA AS and iommufd AS. Otherwise the translation will
> be problematic.
>
> Thanks
>
Got it, thanks Jason. I will re-write this part
Thanks
Cindy
> >
> > Thanks
> >
> >
> > > 5) while map the memory, qemu will use ASID 3 to map /umap
> > > and use ASID 0 for legacy mode map/umap
> > >
> > > So kernel here will not maintain the ioas_id from iommufd,
> > > and this also make the code strange since there will 2 different asid
> > > for the same AS, maybe we can save these information in the kernel
> > > Thanks
> > > cindy
> > > > > Thanks
> > > > > Cindy
> > > > > > > +
> > > > > > > +#define VDPA_DEVICE_ATTACH_IOMMUFD_AS \
> > > > > > > + _IOW(VHOST_VIRTIO, 0x82, struct vdpa_device_attach_iommufd_as)
> > > > > > > +
> > > > > > > +/*
> > > > > > > + * VDPA_DEVICE_DETACH_IOMMUFD_AS
> > > > > > > + *
> > > > > > > + * Detach a vdpa device from the iommufd address space it has been
> > > > > > > + * attached to. After it, device should be in a blocking DMA state.
> > > > > > > + *
> > > > > > > + * Available only after a device has been bound to iommufd via
> > > > > > > + * VHOST_VDPA_SET_IOMMU_FD
> > > > > > > + *
> > > > > > > + * @argsz: user filled size of this data.
> > > > > > > + * @flags: must be 0.
> > > > > > > + *
> > > > > > > + * Return: 0 on success, -errno on failure.
> > > > > > > + */
> > > > > > > +struct vdpa_device_detach_iommufd_as {
> > > > > > > + __u32 argsz;
> > > > > > > + __u32 flags;
> > > > > > > +};
> > > > > > > +
> > > > > > > +#define VDPA_DEVICE_DETACH_IOMMUFD_AS \
> > > > > > > + _IOW(VHOST_VIRTIO, 0x83, struct vdpa_device_detach_iommufd_as)
> > > > > > > +
> > > > > > > #endif
> > > > > > > --
> > > > > > > 2.34.3
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
>