[PATCH] msm: misc: enable QRC support on msm-5.4 on RB3-Gen2
From: zhengjia zhu via B4 Relay
Date: Thu Nov 09 2023 - 01:39:41 EST
From: zhengjia zhu <quic_zhezhu@xxxxxxxxxxx>
QRC Driver support functions:
- Read data from serial device port.
- Write data to serial device port.
- Pin control reset robotic controller.
Signed-off-by: zhengjia zhu <quic_zhezhu@xxxxxxxxxxx>
---
drivers/misc/qrc/Kconfig | 25 ++++
drivers/misc/qrc/Makefile | 9 ++
drivers/misc/qrc/qrc_core.c | 312 +++++++++++++++++++++++++++++++++++++++
drivers/misc/qrc/qrc_core.h | 142 ++++++++++++++++++
drivers/misc/qrc/qrc_uart.c | 352 ++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 840 insertions(+)
diff --git a/drivers/misc/qrc/Kconfig b/drivers/misc/qrc/Kconfig
new file mode 100644
index 000000000000..59f734c02092
--- /dev/null
+++ b/drivers/misc/qrc/Kconfig
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# QRC device driver configuration
+#
+
+menu "qrc device driver"
+
+config QRC
+ bool "QRC device driver for Robotic SDK MCU"
+ help
+ This kernel configuration is used to enable robotic controller
+ device driver. Say Y here if you want to enable robotic
+ controller device driver.
+ When in doubt, say N.
+
+config QRC_DEBUG
+ bool "QRC Debugging"
+ depends on QRC
+ help
+ Say Y here if you want the robotic controller to produce
+ a bunch of debug messages to the system log. Select this if you
+ are having a problem with robotic controller support and want
+ to see more of what is going on.
+ When in doubt, say N.
+endmenu
diff --git a/drivers/misc/qrc/Makefile b/drivers/misc/qrc/Makefile
new file mode 100644
index 000000000000..d811992aa0d9
--- /dev/null
+++ b/drivers/misc/qrc/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the QRC bus specific drivers.
+
+
+obj-$(CONFIG_QRC) += qrc_core.o qrc_uart.o
+
+
+#ccflags-$(CONFIG_QRC_DEBUG) := -DDEBUG
diff --git a/drivers/misc/qrc/qrc_core.c b/drivers/misc/qrc/qrc_core.c
new file mode 100644
index 000000000000..9d03f35e9683
--- /dev/null
+++ b/drivers/misc/qrc/qrc_core.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* driver/misc/qrc/qrc_core.c
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cdev.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include "qrc_core.h"
+
+#define FIFO_CLEAR 0x1
+
+#define QRC_DEVICE_NAME "qrc"
+
+static dev_t qrc_devt;
+static struct class *qrc_class;
+
+static int qrc_cdev_fasync(int fd, struct file *filp, int mode)
+{
+ struct qrc_dev *qrc;
+
+ qrc = filp->private_data;
+ return fasync_helper(fd, filp, mode, &qrc->async_queue);
+}
+
+static int qrc_cdev_open(struct inode *inode, struct file *filp)
+{
+ struct qrc_dev *qrc;
+
+ qrc = container_of(inode->i_cdev,
+ struct qrc_dev, cdev);
+ filp->private_data = qrc;
+ if (qrc->qrc_ops != NULL)
+ qrc->qrc_ops->qrcops_open(qrc);
+ return 0;
+}
+
+static int qrc_cdev_release(struct inode *inode, struct file *filp)
+{
+ struct qrc_dev *qrc;
+
+ qrc = filp->private_data;
+ if (qrc->qrc_ops != NULL)
+ qrc->qrc_ops->qrcops_close(qrc);
+
+ return 0;
+}
+
+/* GPIO control */
+static int
+qrc_control_gpio_init(struct qrc_dev *qdev, struct device_node *node)
+{
+ int ret;
+
+ /* QRC BOOT0 GPIO */
+ qdev->qrc_boot0_gpio = of_get_named_gpio(node,
+ "qcom,qrc-boot-gpio", 0);
+ if (qdev->qrc_boot0_gpio < 0)
+ pr_err("qrc_boot0_gpio is not available\n");
+
+ /* UART RESET GPIO */
+ qdev->qrc_reset_gpio = of_get_named_gpio(node,
+ "qcom,qrc-reset-gpio", 0);
+ if (qdev->qrc_reset_gpio < 0)
+ pr_err("qrc_reset_gpio is not available\n");
+
+ if (gpio_is_valid(qdev->qrc_boot0_gpio)) {
+ ret = gpio_request(qdev->qrc_boot0_gpio, "QRC_BOOT0_GPIO");
+ if (unlikely(ret)) {
+ pr_err("gpio request qrc_boot0_gpio failed for:%d\n",
+ qdev->qrc_boot0_gpio);
+ return ret;
+ }
+ }
+
+ if (gpio_is_valid(qdev->qrc_reset_gpio)) {
+ ret = gpio_request(qdev->qrc_reset_gpio, "QRC_RESET_GPIO");
+ if (unlikely(ret)) {
+ pr_err("gpio request qrc_reset_gpio failed for:%d\n",
+ qdev->qrc_reset_gpio);
+ return ret;
+ }
+ }
+
+ ret = gpio_direction_output(qdev->qrc_reset_gpio, 0);
+ ret += gpio_export(qdev->qrc_reset_gpio, 0);
+
+ if (ret) {
+ pr_err("Unable to configure GPIO%d (RESET)\n",
+ qdev->qrc_reset_gpio);
+ ret = -EBUSY;
+ gpio_free(qdev->qrc_reset_gpio);
+ return ret;
+ }
+
+ ret = gpio_direction_output(qdev->qrc_boot0_gpio, 1);
+ ret += gpio_export(qdev->qrc_boot0_gpio, 0);
+ if (ret) {
+ pr_err("Unable to configure GPIO%d (BOOT0)\n",
+ qdev->qrc_boot0_gpio);
+ ret = -EBUSY;
+ gpio_free(qdev->qrc_boot0_gpio);
+ return ret;
+ }
+ /* default config gpio status.boot=1,reset=0 */
+ gpio_set_value(qdev->qrc_boot0_gpio, 1);
+ gpio_set_value(qdev->qrc_reset_gpio, 0);
+
+ return 0;
+}
+
+static void
+qrc_control_gpio_uninit(struct qrc_dev *qdev)
+{
+ gpio_free(qdev->qrc_boot0_gpio);
+ gpio_free(qdev->qrc_reset_gpio);
+}
+
+static void qrc_gpio_reboot(struct qrc_dev *qdev)
+{
+ gpio_set_value(qdev->qrc_reset_gpio, 1);
+ msleep(100);
+ gpio_set_value(qdev->qrc_reset_gpio, 0);
+}
+static long qrc_cdev_ioctl(struct file *filp, unsigned int cmd,
+ unsigned long arg)
+{
+ struct qrc_dev *qdev;
+
+ qdev = filp->private_data;
+ switch (cmd) {
+ case QRC_FIFO_CLEAR:
+ mutex_lock(&qdev->mutex);
+ qdev->qrc_ops->qrcops_data_clean(qdev);
+ mutex_unlock(&qdev->mutex);
+ return 0;
+ case QRC_REBOOT:
+ if (gpio_is_valid(qdev->qrc_reset_gpio)) {
+ qrc_gpio_reboot(qdev);
+ return 0;
+ } else
+ return -EFAULT;
+ case QRC_BOOT_TO_MEM:
+ if (gpio_is_valid(qdev->qrc_boot0_gpio)) {
+ gpio_set_value(qdev->qrc_boot0_gpio, 1);
+ qrc_gpio_reboot(qdev);
+ return 0;
+ } else
+ return -EFAULT;
+ case QRC_BOOT_TO_FLASH:
+ if (gpio_is_valid(qdev->qrc_boot0_gpio)) {
+ gpio_set_value(qdev->qrc_boot0_gpio, 0);
+ qrc_gpio_reboot(qdev);
+ return 0;
+ } else
+ return -EFAULT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned int qrc_cdev_poll(struct file *filp, poll_table *wait)
+{
+ unsigned int mask = 0;
+ struct qrc_dev *qrc;
+
+ qrc = filp->private_data;
+ mutex_lock(&qrc->mutex);
+
+ poll_wait(filp, &qrc->r_wait, wait);
+
+ if (qrc->qrc_ops->qrcops_data_status(qrc) != 0)
+ mask |= POLLIN | POLLRDNORM;
+
+ mutex_unlock(&qrc->mutex);
+ return mask;
+}
+
+static ssize_t qrc_cdev_read(struct file *filp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret;
+ struct qrc_dev *qrc;
+ DECLARE_WAITQUEUE(wait, current);
+
+ qrc = filp->private_data;
+
+ mutex_lock(&qrc->mutex);
+ add_wait_queue(&qrc->r_wait, &wait);
+
+ while (qrc->qrc_ops->qrcops_data_status(qrc) == 0) {
+
+ if (filp->f_flags & O_NONBLOCK) {
+ ret = -EAGAIN;
+ goto out;
+ }
+ __set_current_state(TASK_INTERRUPTIBLE);
+ mutex_unlock(&qrc->mutex);
+
+ schedule();
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ goto remove;
+ }
+
+ mutex_lock(&qrc->mutex);
+ }
+
+ ret = qrc->qrc_ops->qrcops_receive(qrc, buf, count);
+
+out:
+ mutex_unlock(&qrc->mutex);
+remove:
+ remove_wait_queue(&qrc->r_wait, &wait);
+ set_current_state(TASK_RUNNING);
+ return ret;
+}
+
+static ssize_t qrc_cdev_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct qrc_dev *qrc;
+ enum qrcdev_tx ret;
+
+ qrc = filp->private_data;
+ ret = qrc->qrc_ops->qrcops_xmit(buf, count, qrc);
+ if (ret == QRCDEV_TX_OK)
+ return count;
+
+ return 0;
+}
+
+static const struct file_operations qrc_cdev_fops = {
+ .owner = THIS_MODULE,
+ .read = qrc_cdev_read,
+ .write = qrc_cdev_write,
+ .unlocked_ioctl = qrc_cdev_ioctl,
+ .poll = qrc_cdev_poll,
+ .fasync = qrc_cdev_fasync,
+ .open = qrc_cdev_open,
+ .release = qrc_cdev_release,
+};
+
+/*-------Interface for qrc device ---------*/
+int qrc_register_device(struct qrc_dev *qdev, struct device *dev)
+{
+ int ret;
+ dev_t devt;
+
+ if (!qdev)
+ return -ENOMEM;
+
+ mutex_init(&qdev->mutex);
+ init_waitqueue_head(&qdev->r_wait);
+ init_waitqueue_head(&qdev->w_wait);
+
+ /*register cdev*/
+ qrc_class = class_create(THIS_MODULE, "qrc_class");
+ if (IS_ERR(qrc_class)) {
+ pr_err("failed to allocate class\n");
+ return PTR_ERR(qrc_class);
+ }
+ ret = alloc_chrdev_region(&qrc_devt, 0, 1, "qrc");
+ if (ret < 0) {
+ pr_err("failed to allocate char device region\n");
+ class_destroy(qrc_class);
+ return ret;
+ }
+
+ devt = MKDEV(MAJOR(qrc_devt), 0);
+
+ cdev_init(&qdev->cdev, &qrc_cdev_fops);
+ ret = qrc_control_gpio_init(qdev, dev->of_node);
+
+ ret = cdev_add(&qdev->cdev, devt, 1);
+ if (ret) {
+ pr_err("qrc failed to add char device\n");
+ return ret;
+ }
+
+ qdev->dev = device_create(qrc_class, dev, devt, qdev,
+ "qrc");
+ if (IS_ERR(qdev->dev)) {
+ ret = PTR_ERR(qdev->dev);
+ goto del_cdev;
+ }
+
+ return 0;
+
+del_cdev:
+ cdev_del(&qdev->cdev);
+ return ret;
+}
+
+void qrc_unregister(struct qrc_dev *qdev)
+{
+ device_destroy(qrc_class, qdev->dev->devt);
+ qrc_control_gpio_uninit(qdev);
+ dev_info(qdev->dev, "qrc drv unregistered\n");
+}
diff --git a/drivers/misc/qrc/qrc_core.h b/drivers/misc/qrc/qrc_core.h
new file mode 100644
index 000000000000..1126bf36b32b
--- /dev/null
+++ b/drivers/misc/qrc/qrc_core.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* driver/misc/qrc/qrc_core.h
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _QRC_CORE_H
+#define _QRC_CORE_H
+
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/kfifo.h>
+#include <linux/sched/signal.h>
+#include <linux/uaccess.h>
+#include <linux/ioctl.h>
+
+#define QRC_NAME_SIZE 30
+#define QRC_INTERFACE_SIZE 30
+#define QRC_FIFO_SIZE 0x1000
+
+struct qrc_dev;
+
+/* IOCTL commands */
+#define QRC_IOC_MAGIC 'q'
+
+/* Clear read fifo */
+#define QRC_FIFO_CLEAR _IO(QRC_IOC_MAGIC, 1)
+/* Reboot QRC controller */
+#define QRC_REBOOT _IO(QRC_IOC_MAGIC, 2)
+/* QRC boot from memory */
+#define QRC_BOOT_TO_MEM _IO(QRC_IOC_MAGIC, 3)
+/* QRC boot from flash */
+#define QRC_BOOT_TO_FLASH _IO(QRC_IOC_MAGIC, 4)
+
+
+enum qrcdev_state_t {
+ __STATE_IDLE,
+ __STATE_READING,
+ __STATE_WRITING,
+};
+
+enum qrc_interface {
+ UART = 0,
+ SPI,
+};
+
+enum qrcdev_tx {
+ __QRCDEV_TX_MIN = INT_MIN, /* make sure enum is signed (-1)*/
+ QRCDEV_TX_OK = 0x00, /* driver took care of packet */
+ QRCDEV_TX_BUSY = 0x10, /* driver tx path was busy*/
+};
+
+struct qrc_device_stats {
+ unsigned long rx_bytes;
+ unsigned long tx_bytes;
+ unsigned long rx_errors;
+ unsigned long tx_errors;
+ unsigned long collisions;
+ unsigned long rx_length_errors;
+ unsigned long rx_over_errors;
+ unsigned long rx_fifo_errors;
+};
+
+struct qrc_device_ops {
+ int (*qrcops_init)(struct qrc_dev *dev);
+ void (*qrcops_uninit)(struct qrc_dev *dev);
+ int (*qrcops_open)(struct qrc_dev *dev);
+ int (*qrcops_close)(struct qrc_dev *dev);
+ int (*qrcops_setup)(struct qrc_dev *dev);
+ enum qrcdev_tx (*qrcops_xmit)(const char __user *buf,
+ size_t data_length, struct qrc_dev *dev);
+ int (*qrcops_receive)(struct qrc_dev *dev,
+ char __user *buf, size_t count);
+ int (*qrcops_data_status)
+ (struct qrc_dev *dev);
+ int (*qrcops_config)(struct qrc_dev *dev);
+ void (*qrcops_data_clean)(struct qrc_dev *dev);
+};
+
+/* qrc char device */
+struct qrc_dev {
+ struct qrc_device_stats stats;
+ /* qrc dev ops */
+ struct qrc_device_ops *qrc_ops;
+ struct mutex mutex;
+ wait_queue_head_t r_wait;
+ wait_queue_head_t w_wait;
+ struct fasync_struct *async_queue;
+ struct cdev cdev;
+ struct device *dev;
+ void *data;
+ int qrc_boot0_gpio;
+ int qrc_reset_gpio;
+};
+
+/**
+ * struct qrcuart - The qrcuart device structure.
+ * @qrc_dev: This is robotic controller device structure.
+ * It include interface for qrcuart.
+ * @lock: spinlock for transmitting lock.
+ * @tx_work: Flushes transmit TX buffer.
+ * @serdev: Serial device bus structure.
+ * @qrc_rx_fifo: Qrcuart receive buffer.
+ * @tx_head: String head in XMIT queue.
+ * @tx_left: Bytes left in XMIT queue.
+ * @tx_buffer: XMIT buffer.
+ * @is_open: Flag shows if the device is open.
+ * This structure is used to define robotic controller uart device.
+ */
+struct qrcuart {
+ struct qrc_dev *qrc_dev;
+ spinlock_t lock;
+ struct work_struct tx_work;
+ struct serdev_device *serdev;
+ struct kfifo qrc_rx_fifo;
+ unsigned char *tx_head;
+ int tx_left;
+ unsigned char *tx_buffer;
+ bool is_open;
+};
+
+struct qrcspi {
+ struct qrc_dev *qrc_dev;
+ spinlock_t lock; /* transmit lock */
+};
+
+static inline void qrc_set_data(struct qrc_dev *dev, void *data)
+{
+ dev->data = data;
+}
+static inline void *qrc_get_data(const struct qrc_dev *dev)
+{
+ return dev->data;
+}
+
+int qrc_register_device(struct qrc_dev *qdev, struct device *dev);
+void qrc_unregister(struct qrc_dev *qdev);
+
+#endif
+
diff --git a/drivers/misc/qrc/qrc_uart.c b/drivers/misc/qrc/qrc_uart.c
new file mode 100644
index 000000000000..2e7f384833c3
--- /dev/null
+++ b/drivers/misc/qrc/qrc_uart.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* driver/misc/qrc/qrc_uart.c
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/serdev.h>
+#include <linux/types.h>
+#include<linux/slab.h>
+#include <linux/init.h>
+#include <linux/cdev.h>
+#include <linux/of_device.h>
+
+#include "qrc_core.h"
+
+#define QRC_RX_FIFO_SIZE 0x400
+#define QRC_TX_BUFF_SIZE 0x400
+#define QRCUART_DRV_NAME "qrcuart"
+#define QRC_DRV_VERSION "0.1.0"
+
+
+static int qrcuart_setup(struct qrc_dev *dev);
+
+static int
+qrc_uart_receive(struct serdev_device *serdev, const unsigned char *data,
+ size_t count)
+{
+ struct qrcuart *qrc = serdev_device_get_drvdata(serdev);
+ struct qrc_dev *qrc_dev = qrc->qrc_dev;
+ int ret;
+
+ /* check count */
+ ret = kfifo_avail(&qrc->qrc_rx_fifo);
+ if (!ret)
+ return 0;
+
+ if (count > ret)
+ count = ret;
+
+ ret = kfifo_in(&qrc->qrc_rx_fifo, data, count);
+ if (!ret)
+ return 0;
+
+ wake_up_interruptible(&qrc_dev->r_wait);
+
+ return count;
+}
+
+/* Write out any remaining transmit buffer. Scheduled when tty is writable */
+static void qrcuart_transmit(struct work_struct *work)
+{
+ struct qrcuart *qrc = container_of(work, struct qrcuart, tx_work);
+ int written;
+
+ spin_lock_bh(&qrc->lock);
+
+ if (qrc->tx_left <= 0) {
+ /* Now serial buffer is almost free & we can start
+ * transmission of another packet
+ */
+ spin_unlock_bh(&qrc->lock);
+ return;
+ }
+
+ written = serdev_device_write_buf(qrc->serdev, qrc->tx_head,
+ qrc->tx_left);
+ if (written > 0) {
+ qrc->tx_left -= written;
+ qrc->tx_head += written;
+ }
+ spin_unlock_bh(&qrc->lock);
+}
+
+/* Called by the driver when there's room for more data.
+ * Schedule the transmit.
+ */
+static void qrc_uart_wakeup(struct serdev_device *serdev)
+{
+ struct qrcuart *qrc = serdev_device_get_drvdata(serdev);
+
+ schedule_work(&qrc->tx_work);
+}
+
+static struct serdev_device_ops qrc_serdev_ops = {
+ .receive_buf = qrc_uart_receive,
+ .write_wakeup = qrc_uart_wakeup,
+};
+
+/*----------------Interface to QRC core -----------------------------*/
+
+static int qrcuart_open(struct qrc_dev *dev)
+{
+ struct qrcuart *qrc = qrc_get_data(dev);
+ struct serdev_device *serdev = qrc->serdev;
+ int ret;
+
+ if (!qrc->is_open) {
+ ret = serdev_device_open(serdev);
+ if (ret) {
+ pr_err("qrcuart :Unable to open device\n");
+ return ret;
+ }
+ serdev_device_set_baudrate(serdev, 115200);
+ serdev_device_set_flow_control(serdev, false);
+ qrc->is_open = true;
+ }
+
+ return 0;
+}
+
+static int qrcuart_close(struct qrc_dev *dev)
+{
+ struct qrcuart *qrc = qrc_get_data(dev);
+ struct serdev_device *serdev = qrc->serdev;
+
+ flush_work(&qrc->tx_work);
+ spin_lock_bh(&qrc->lock);
+ qrc->tx_left = 0;
+ spin_unlock_bh(&qrc->lock);
+
+ if (qrc->is_open) {
+ serdev_device_close(serdev);
+ qrc->is_open = false;
+ }
+
+ return 0;
+}
+
+static int qrcuart_init(struct qrc_dev *dev)
+{
+ struct qrcuart *qrc = qrc_get_data(dev);
+ size_t len;
+ int ret;
+
+ /* Finish setting up the device info. */
+ len = QRC_TX_BUFF_SIZE;
+ qrc->tx_buffer = devm_kmalloc(&qrc->serdev->dev, len, GFP_KERNEL);
+
+ if (!qrc->tx_buffer)
+ return -ENOMEM;
+
+ qrc->tx_head = qrc->tx_buffer;
+ qrc->tx_left = 0;
+
+ ret = kfifo_alloc(&qrc->qrc_rx_fifo, QRC_RX_FIFO_SIZE,
+ GFP_KERNEL);
+ if (ret)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void qrcuart_uninit(struct qrc_dev *dev)
+{
+ struct qrcuart *qrc = qrc_get_data(dev);
+ kfifo_free(&qrc->qrc_rx_fifo);
+}
+
+/*put data from kfifo to qrc fifo */
+static int qrcuart_receive(struct qrc_dev *dev, char __user *buf,
+ size_t count)
+{
+ struct qrcuart *qrc = qrc_get_data(dev);
+ u32 fifo_len, trans_len;
+
+ if (!kfifo_is_empty(&qrc->qrc_rx_fifo)) {
+ fifo_len = kfifo_len(&qrc->qrc_rx_fifo);
+ if (count > fifo_len)
+ count = fifo_len;
+ if (kfifo_to_user(&qrc->qrc_rx_fifo,
+ (void *)buf, count, &trans_len))
+ return -EFAULT;
+ return trans_len;
+ }
+ return 0;
+}
+
+static int qrcuart_data_status(struct qrc_dev *dev)
+{
+ struct qrcuart *qrc = qrc_get_data(dev);
+
+ return kfifo_len(&qrc->qrc_rx_fifo);
+}
+
+static void qrcuart_data_clean(struct qrc_dev *dev)
+{
+ struct qrcuart *qrc = qrc_get_data(dev);
+
+ kfifo_reset(&qrc->qrc_rx_fifo);
+}
+
+static enum qrcdev_tx qrcuart_xmit(const char __user *buf,
+ size_t data_length, struct qrc_dev *dev)
+{
+ struct qrcuart *qrc = qrc_get_data(dev);
+ struct qrc_device_stats *n_stats = &dev->stats;
+ size_t written;
+ u8 *pos;
+
+ WARN_ON(qrc->tx_left);
+
+ pos = qrc->tx_buffer + qrc->tx_left;
+ if ((data_length + qrc->tx_left) > QRC_TX_BUFF_SIZE) {
+ pr_err("qrcuart transmit date overflow %d\n", data_length);
+ return __QRCDEV_TX_MIN;
+ }
+
+ if (copy_from_user(pos, buf, data_length))
+ return __QRCDEV_TX_MIN;
+
+ pos += data_length;
+
+ spin_lock(&qrc->lock);
+
+ written = serdev_device_write_buf(qrc->serdev, qrc->tx_buffer,
+ pos - qrc->tx_buffer);
+ if (written > 0) {
+ qrc->tx_left = (pos - qrc->tx_buffer) - written;
+ qrc->tx_head = qrc->tx_buffer + written;
+ n_stats->tx_bytes += written;
+ }
+
+ spin_unlock(&qrc->lock);
+
+ return QRCDEV_TX_OK;
+}
+
+static int qrcuart_config(struct qrc_dev *dev)
+{
+ /*baudrate,wordlength ... config*/
+ return 0;
+}
+
+static struct qrc_device_ops qrcuart_qrc_ops = {
+ .qrcops_open = qrcuart_open,
+ .qrcops_close = qrcuart_close,
+ .qrcops_init = qrcuart_init,
+ .qrcops_uninit = qrcuart_uninit,
+ .qrcops_xmit = qrcuart_xmit,
+ .qrcops_receive = qrcuart_receive,
+ .qrcops_config = qrcuart_config,
+ .qrcops_setup = qrcuart_setup,
+ .qrcops_data_status = qrcuart_data_status,
+ .qrcops_data_clean = qrcuart_data_clean,
+};
+
+static int qrcuart_setup(struct qrc_dev *dev)
+{
+ dev->qrc_ops = &qrcuart_qrc_ops;
+ return 0;
+}
+
+static int qrc_uart_probe(struct serdev_device *serdev)
+{
+ struct qrc_dev *qdev;
+ struct qrcuart *qrc;
+ int ret = 0;
+
+ qrc = kmalloc(sizeof(*qrc), GFP_KERNEL);
+ if (!qrc)
+ return -ENOMEM;
+ qdev = kmalloc(sizeof(*qdev), GFP_KERNEL);
+ if (!qdev) {
+ kfree(qrc);
+ return -ENOMEM;
+ }
+ qrc_set_data(qdev, qrc);
+
+ qrc->qrc_dev = qdev;
+ qrc->serdev = serdev;
+ spin_lock_init(&qrc->lock);
+ INIT_WORK(&qrc->tx_work, qrcuart_transmit);
+ qrcuart_setup(qdev);
+ ret = qrcuart_init(qdev);
+ if (ret) {
+ pr_err("qrcuart: Fail to init qrc structure\n");
+ kfree(qdev);
+ kfree(qrc);
+ return ret;
+ }
+ serdev_device_set_drvdata(serdev, qrc);
+ serdev_device_set_client_ops(serdev, &qrc_serdev_ops);
+
+ ret = serdev_device_open(serdev);
+ if (ret) {
+ pr_err("qrcuart :Unable to open device\n");
+ goto free;
+ }
+ serdev_device_close(serdev);
+ qrc->is_open = false;
+
+ ret = qrc_register_device(qdev, &serdev->dev);
+
+ if (ret) {
+ pr_err("qrcuart: Unable to register qrc device %s\n");
+ cancel_work_sync(&qrc->tx_work);
+ goto free;
+ }
+
+ return 0;
+
+free:
+ qrcuart_uninit(qdev);
+ kfree(qdev);
+ kfree(qrc);
+ return ret;
+}
+
+static void qrc_uart_remove(struct serdev_device *serdev)
+{
+ struct qrcuart *qrc = serdev_device_get_drvdata(serdev);
+
+ if (qrc->is_open)
+ serdev_device_close(serdev);
+
+ qrcuart_uninit(qrc->qrc_dev);
+ cancel_work_sync(&qrc->tx_work);
+ qrc_unregister(qrc->qrc_dev);
+ kfree(qrc->qrc_dev);
+ kfree(qrc);
+ dev_info(&serdev->dev, "qrcuart drv removed\n");
+}
+
+static const struct of_device_id qrc_uart_of_match[] = {
+ {
+ .compatible = "qcom,qrc-uart",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qrc_of_match);
+
+static struct serdev_device_driver qrc_uart_driver = {
+ .probe = qrc_uart_probe,
+ .remove = qrc_uart_remove,
+ .driver = {
+ .name = QRCUART_DRV_NAME,
+ .of_match_table = of_match_ptr(qrc_uart_of_match),
+ },
+};
+
+module_serdev_device_driver(qrc_uart_driver);
+
+/**********************************************/
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. QRC Uart Driver");
+MODULE_LICENSE("GPL v2");
---
base-commit: ab57716449b3438c0136f6f412a2e59e0cf037a9
change-id: 20231109-qrc-e4cab62f0f7e
Best regards,
--
zhengjia zhu <quic_zhezhu@xxxxxxxxxxx>