Re: [PATCH v2 27/28] dt-bindings: net: fsl,qmc-hdlc: Add framer support

[Conor Dooley]

On Wed, Jul 26, 2023 at 05:02:23PM +0200, Herve Codina wrote:
> A framer can be connected to the QMC HDLC.
> If present, this framer is the interface between the TDM used by the QMC
> HDLC and the E1/T1 line.
> The QMC HDLC can use this framer to get information about the line and
> configure the line.
> 
> Add an optional framer property to reference the framer itself.
> 
> Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>

Why not fully describe the hardware in one patch in this series, rather
than split this over two different ones?

> ---
>  Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> index 8bb6f34602d9..bf29863ab419 100644
> --- a/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> +++ b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> @@ -27,6 +27,11 @@ properties:
>        Should be a phandle/number pair. The phandle to QMC node and the QMC
>        channel to use.
>  
> +  framer:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      phandle to the framer node
> +
>  required:
>    - compatible
>    - fsl,qmc-chan
> -- 
> 2.41.0
>

Attachment: signature.asc
Description: PGP signature