Re: [PATCH v3] perf/core: Bail out early if the request AUX area is out of bound

[Shuai Xue]

On 2023/7/24 23:21, James Clark wrote:
> 
> 
> On 11/07/2023 02:41, Shuai Xue wrote:
>> When perf-record with a large AUX area, e.g 4GB, it fails with:
>>
>>     #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1
>>     failed to mmap with 12 (Cannot allocate memory)
>>
>> and it reveals a WARNING with __alloc_pages():
>>
>> [   66.595604] ------------[ cut here ]------------
>> [   66.600206] WARNING: CPU: 44 PID: 17573 at mm/page_alloc.c:5568 __alloc_pages+0x1ec/0x248
>> [   66.608375] Modules linked in: ip6table_filter(E) ip6_tables(E) iptable_filter(E) ebtable_nat(E) ebtables(E) aes_ce_blk(E) vfat(E) fat(E) aes_ce_cipher(E) crct10dif_ce(E) ghash_ce(E) sm4_ce_cipher(E) sm4(E) sha2_ce(E) sha256_arm64(E) sha1_ce(E) acpi_ipmi(E) sbsa_gwdt(E) sg(E) ipmi_si(E) ipmi_devintf(E) ipmi_msghandler(E) ip_tables(E) sd_mod(E) ast(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) nvme(E) sysimgblt(E) i2c_algo_bit(E) nvme_core(E) drm_shmem_helper(E) ahci(E) t10_pi(E) libahci(E) drm(E) crc64_rocksoft(E) i40e(E) crc64(E) libata(E) i2c_core(E)
>> [   66.657719] CPU: 44 PID: 17573 Comm: perf Kdump: loaded Tainted: G            E      6.3.0-rc4+ #58
>> [   66.666749] Hardware name: Default Default/Default, BIOS 1.2.M1.AL.P.139.00 03/22/2023
>> [   66.674650] pstate: 23400009 (nzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
>> [   66.681597] pc : __alloc_pages+0x1ec/0x248
>> [   66.685680] lr : __kmalloc_large_node+0xc0/0x1f8
>> [   66.690285] sp : ffff800020523980
>> [   66.693585] pmr_save: 000000e0
>> [   66.696624] x29: ffff800020523980 x28: ffff000832975800 x27: 0000000000000000
>> [   66.703746] x26: 0000000000100000 x25: 0000000000100000 x24: ffff8000083615d0
>> [   66.710866] x23: 0000000000040dc0 x22: ffff000823d6d140 x21: 000000000000000b
>> [   66.717987] x20: 000000000000000b x19: 0000000000000000 x18: 0000000000000030
>> [   66.725108] x17: 0000000000000000 x16: ffff800008f05be8 x15: ffff000823d6d6d0
>> [   66.732229] x14: 0000000000000000 x13: 343373656761705f x12: 726e202c30206574
>> [   66.739350] x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffff8000083af570
>> [   66.746471] x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 000000000005fff4
>> [   66.753592] x5 : 0000000000000000 x4 : ffff000823d6d8d8 x3 : 0000000000000000
>> [   66.760713] x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000040dc0
>> [   66.767834] Call trace:
>> [   66.770267]  __alloc_pages+0x1ec/0x248
>> [   66.774003]  __kmalloc_large_node+0xc0/0x1f8
>> [   66.778259]  __kmalloc_node+0x134/0x1e8
>> [   66.782081]  rb_alloc_aux+0xe0/0x298
>> [   66.785643]  perf_mmap+0x440/0x660
>> [   66.789031]  mmap_region+0x308/0x8a8
>> [   66.792593]  do_mmap+0x3c0/0x528
>> [   66.795807]  vm_mmap_pgoff+0xf4/0x1b8
>> [   66.799456]  ksys_mmap_pgoff+0x18c/0x218
>> [   66.803365]  __arm64_sys_mmap+0x38/0x58
>> [   66.807187]  invoke_syscall+0x50/0x128
>> [   66.810922]  el0_svc_common.constprop.0+0x58/0x188
>> [   66.815698]  do_el0_svc+0x34/0x50
>> [   66.818999]  el0_svc+0x34/0x108
>> [   66.822127]  el0t_64_sync_handler+0xb8/0xc0
>> [   66.826296]  el0t_64_sync+0x1a4/0x1a8
>> [   66.829946] ---[ end trace 0000000000000000 ]---
>>
>> 'rb->aux_pages' allocated by kcalloc() is a pointer array which is used to
>> maintain AUX trace pages. The allocated page for this array is physically
>> contiguous (and virtually contiguous) with an order of 0..MAX_ORDER. If the
>> size of pointer array crosses the limitation set by MAX_ORDER, it reveals a
>> WARNING.
>>
>> So bail out early with -EINVAL if the request AUX area is out of bound,
>> e.g.:
>>
>>     #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1
>>     failed to mmap with 22 (Invalid argument)
>>
> 
> Hi Shuai,

Hi, James,

> 
> Now that I think about this, isn't the previous error "failed to mmap
> with 12 (Cannot allocate memory)" better than "failed to mmap with 22
> (Invalid argument)"?

If I see a "invalid argument", I am expected to check my perf command
first. But for "Cannot allocate memory", I will doubt that the system
have problem but I dont have any idea about.

IMO, I prefer "invalid argument". But I can change back to previous error
message if you insist.


> And you might want to split the doc change out if they are going to be
> merged through separate trees.

Will do that.

> 
> And one comment below:
> 
>> Signed-off-by: Shuai Xue <xueshuai@xxxxxxxxxxxxxxxxx>
>> ---
>> changes since v2:
>> - remove unnecessary overflow check (per Peter)
>>
>> changes since v1:
>> - drop out patch2 because it has been fixed on upstream (Thanks James for reminding)
>> - move sanity check into rb_alloc_aux (per Leo)
>> - add overflow check (per James)
>> ---
>>  kernel/events/ring_buffer.c              | 3 +++
>>  tools/perf/Documentation/perf-record.txt | 3 ++-
>>  2 files changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
>> index a0433f37b024..5933ce45c68a 100644
>> --- a/kernel/events/ring_buffer.c
>> +++ b/kernel/events/ring_buffer.c
>> @@ -699,6 +699,9 @@ int rb_alloc_aux(struct perf_buffer *rb, struct perf_event *event,
>>  		watermark = 0;
>>  	}
>>  
>> +	/* Can't allocate more than MAX_ORDER */
>> +	if (get_order((unsigned long)nr_pages * sizeof(void *)) > MAX_ORDER)
>> +		return -EINVAL;
>>  	rb->aux_pages = kcalloc_node(nr_pages, sizeof(void *), GFP_KERNEL,
>>  				     node);
>>  	if (!rb->aux_pages)
>> diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
>> index 680396c56bd1..5d8d3ad084ed 100644
>> --- a/tools/perf/Documentation/perf-record.txt
>> +++ b/tools/perf/Documentation/perf-record.txt
>> @@ -290,7 +290,8 @@ OPTIONS
>>  	specification with appended unit character - B/K/M/G. The
>>  	size is rounded up to have nearest pages power of two value.
>>  	Also, by adding a comma, the number of mmap pages for AUX
>> -	area tracing can be specified.
>> +	area tracing can be specified. With MAX_ORDER set as 10 on
>> +	arm64 platform , the maximum AUX area is limited to 2GiB.
> 
> Minor nit: I wouldn't expect a Perf tool user to know what "MAX_ORDER"
> is, and I don't think the limitation is Arm specific? Maybe something in
> more relevant terms is more useful:
> 
>   The maximum AUX area is limited by the page size of the system. For
>   example with 4K pages configured, the maximum is 2GiB.

Agreed. Will change it.


> 
> Thanks
> James

Thank you for valuable comments.

Best Regards,
Shuai
> 
>>  
>>  -g::
>>  	Enables call-graph (stack chain/backtrace) recording for both