Re: [PATCH v6 2/5] arm64: dts: ti: k3-j784s4: Add Main CPSW2G node

[Tony Lindgren]

Hi,

* Jayesh Choudhary <j-choudhary@xxxxxx> [230721 13:21]:
> From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> index 7ad152a1b90f..1e2a26ac9c65 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> @@ -252,6 +252,30 @@ vdd_sd_dv: regulator-TLV71033 {
>  };
>  
>  &main_pmx0 {
> +	main_cpsw2g_pins_default: main-cpsw2g-pins-default {
> +		pinctrl-single,pins = <
> +			J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */
> +			J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */
> +			J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */
> +			J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */
> +			J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */
> +			J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */
> +			J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */
> +			J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */
> +			J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */
> +			J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */
> +			J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */
> +			J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */
> +		>;
> +	};

We are standardizing pinctrl-single to use pin group node naming with -pins
suffix, so in this case main-cpsw2g-default-pins. The same applies for all
pin group node names. And please use -pins also for a single pin groups as
new pins may need to be added later on in some cases.

These changes are to make dtbs checks work for pinctrl-single yaml binding
as we mostly use a generic compatible and don't want to add all kind of
custom node name matches.

Regards,

Tony