[PATCH 0/7] Add support for LUT PPG

[Anjelique Melendez]

In certain PMICs, LUT pattern and LPG configuration can be stored in SDAM
modules instead of LUT peripheral. This feature is called PPG.

This change series adds support for PPG. Thanks!

Anjelique Melendez (7):
  dt-bindings: soc: qcom: Add qcom-pbs bindings
  dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM
    devices
  soc: qcom: add QCOM PBS driver
  leds: rgb: leds-qcom-lpg: Add support for LUT pattern through single
    SDAM
  leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  leds: rgb: leds-qcom-lpg: Support two-nvmem PPG Scheme
  leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme

 .../bindings/leds/leds-qcom-lpg.yaml          |  85 ++++
 .../bindings/soc/qcom/qcom-pbs.yaml           |  41 ++
 drivers/leds/rgb/leds-qcom-lpg.c              | 393 ++++++++++++++++--
 drivers/soc/qcom/Kconfig                      |   9 +
 drivers/soc/qcom/Makefile                     |   1 +
 drivers/soc/qcom/qcom-pbs.c                   | 343 +++++++++++++++
 include/linux/soc/qcom/qcom-pbs.h             |  36 ++
 7 files changed, 877 insertions(+), 31 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml
 create mode 100644 drivers/soc/qcom/qcom-pbs.c
 create mode 100644 include/linux/soc/qcom/qcom-pbs.h

-- 
2.40.0