[PATCH v7 05/22] soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm

From: Konrad Dybcio
Date: Mon Jun 19 2023 - 09:05:14 EST


From: Stephan Gerhold <stephan@xxxxxxxxxxx>

icc_smd_rpm will do bus clock votes itself rather than taking the
unnecessary detour through the clock subsystem. However, it can only
do that after the clocks have been handed off and scaling has been
enabled in the RPM in clk-smd-rpm.

Move the icc_smd_rpm registration from smd-rpm.c to clk-smd-rpm.c
to avoid any possible races. icc_smd_rpm gets the driver data from
the smd-rpm device, so still register the platform device on the
smd-rpm parent device.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
[Konrad: remove unrelated cleanups]
Acked-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/clk/qcom/clk-smd-rpm.c | 21 +++++++++++++++++++++
drivers/soc/qcom/smd-rpm.c | 17 +----------------
2 files changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 937cb1515968..6e7f0438e8b8 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -1289,12 +1289,20 @@ static struct clk_hw *qcom_smdrpm_clk_hw_get(struct of_phandle_args *clkspec,
return desc->clks[idx] ? &desc->clks[idx]->hw : ERR_PTR(-ENOENT);
}

+static void rpm_smd_unregister_icc(void *data)
+{
+ struct platform_device *icc_pdev = data;
+
+ platform_device_unregister(icc_pdev);
+}
+
static int rpm_smd_clk_probe(struct platform_device *pdev)
{
int ret;
size_t num_clks, i;
struct clk_smd_rpm **rpm_smd_clks;
const struct rpm_smd_clk_desc *desc;
+ struct platform_device *icc_pdev;

rpmcc_smd_rpm = dev_get_drvdata(pdev->dev.parent);
if (!rpmcc_smd_rpm) {
@@ -1344,6 +1352,19 @@ static int rpm_smd_clk_probe(struct platform_device *pdev)
if (ret)
goto err;

+ icc_pdev = platform_device_register_data(pdev->dev.parent,
+ "icc_smd_rpm", -1, NULL, 0);
+ if (IS_ERR(icc_pdev)) {
+ dev_err(&pdev->dev, "Failed to register icc_smd_rpm device: %pE\n",
+ icc_pdev);
+ /* No need to unregister clocks because of this */
+ } else {
+ ret = devm_add_action_or_reset(&pdev->dev, rpm_smd_unregister_icc,
+ icc_pdev);
+ if (ret)
+ goto err;
+ }
+
return 0;
err:
dev_err(&pdev->dev, "Error registering SMD clock driver (%d)\n", ret);
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index 0c1aa809cc4e..577f1f25ab10 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -19,7 +19,6 @@
/**
* struct qcom_smd_rpm - state of the rpm device driver
* @rpm_channel: reference to the smd channel
- * @icc: interconnect proxy device
* @dev: rpm device
* @ack: completion for acks
* @lock: mutual exclusion around the send/complete pair
@@ -27,7 +26,6 @@
*/
struct qcom_smd_rpm {
struct rpmsg_endpoint *rpm_channel;
- struct platform_device *icc;
struct device *dev;

struct completion ack;
@@ -197,7 +195,6 @@ static int qcom_smd_rpm_callback(struct rpmsg_device *rpdev,
static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev)
{
struct qcom_smd_rpm *rpm;
- int ret;

rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL);
if (!rpm)
@@ -210,23 +207,11 @@ static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev)
rpm->rpm_channel = rpdev->ept;
dev_set_drvdata(&rpdev->dev, rpm);

- rpm->icc = platform_device_register_data(&rpdev->dev, "icc_smd_rpm", -1,
- NULL, 0);
- if (IS_ERR(rpm->icc))
- return PTR_ERR(rpm->icc);
-
- ret = of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev);
- if (ret)
- platform_device_unregister(rpm->icc);
-
- return ret;
+ return of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev);
}

static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev)
{
- struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev);
-
- platform_device_unregister(rpm->icc);
of_platform_depopulate(&rpdev->dev);
}


--
2.41.0