[irqchip: irq/irqchip-next] irqchip/loongson-liointc: Fix IRQ trigger polarity

[irqchip-bot for Jianmin Lv]

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     1d7471b4e0ebba5a4bf9db4ade43619e8f2d333d
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/1d7471b4e0ebba5a4bf9db4ade43619e8f2d333d
Author:        Jianmin Lv <lvjianmin@xxxxxxxxxxx>
AuthorDate:    Wed, 14 Jun 2023 19:59:34 +08:00
Committer:     Marc Zyngier <maz@xxxxxxxxxx>
CommitterDate: Fri, 16 Jun 2023 12:59:28 +01:00

irqchip/loongson-liointc: Fix IRQ trigger polarity

For the INT_POLARITY register of Loongson-2K series IRQ
controller, '0' indicates high level or rising edge triggered,
'1' indicates low level or falling edge triggered, and we
can find out the information from the Loongson 2K1000LA User
Manual v1.0, Table 9-2, Section 9.3 (中断寄存器描述 / Description
of the Interrupt Registers).

For Loongson-3 CPU series, setting INT_POLARITY register is not
supported and writting it has no effect.

So trigger polarity setting shouled be fixed for Loongson-2K CPU
series.

Fixes: 17343d0b4039 ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path")
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Huacai Chen <chenhuacai@xxxxxxxxxx>
Co-developed-by: Chong Qiao <qiaochong@xxxxxxxxxxx>
Signed-off-by: Chong Qiao <qiaochong@xxxxxxxxxxx>
Signed-off-by: Jianmin Lv <lvjianmin@xxxxxxxxxxx>
Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230614115936.5950-4-lvjianmin@xxxxxxxxxxx
---
 drivers/irqchip/irq-loongson-liointc.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 8d00a9a..5dd9db8 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -32,6 +32,10 @@
 #define LIOINTC_REG_INTC_EN_STATUS	(LIOINTC_INTC_CHIP_START + 0x04)
 #define LIOINTC_REG_INTC_ENABLE	(LIOINTC_INTC_CHIP_START + 0x08)
 #define LIOINTC_REG_INTC_DISABLE	(LIOINTC_INTC_CHIP_START + 0x0c)
+/*
+ * LIOINTC_REG_INTC_POL register is only valid for Loongson-2K series, and
+ * Loongson-3 series behave as noops.
+ */
 #define LIOINTC_REG_INTC_POL	(LIOINTC_INTC_CHIP_START + 0x10)
 #define LIOINTC_REG_INTC_EDGE	(LIOINTC_INTC_CHIP_START + 0x14)
 
@@ -116,19 +120,19 @@ static int liointc_set_type(struct irq_data *data, unsigned int type)
 	switch (type) {
 	case IRQ_TYPE_LEVEL_HIGH:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
 		break;
 	case IRQ_TYPE_EDGE_RISING:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
 		break;
 	default:
 		irq_gc_unlock_irqrestore(gc, flags);