Re: [PATCH V1 1/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support

From: Adrian Hunter
Date: Wed Jun 14 2023 - 02:22:08 EST

Next message: Miquel Raynal: "Re: [PATCH 10/12] mtd: rawnand: brcmnand: Add BCMBCA read data bus interface"
Previous message: Meenakshi Aggarwal: "RE: [PATCH 0/5] Remove CRYPTO_ALG_ALLOCATES_MEMORY flag"
In reply to: Chevron Li (WH): "RE: [PATCH V1 1/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support"
Next in thread: Adrian Hunter: "Re: [PATCH V1 1/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 7/06/23 04:48, Chevron Li wrote:
> From: Chevron Li <chevron.li@xxxxxxxxxxxxxx>
>
> Add Bayhub new chip GG8 support for USHI function
>
> Signed-off-by: Chevron Li <chevron.li@xxxxxxxxxxxxxx>

Some minor cosmetic comments below.

> ---
> Change in V1:
> 1.Add GG8 chip IDs in sdhci-pci-core.c and sdhci-pci.h
> 2.Add GG8 chip initialization flow at sdhci-pci-o2micro.c
> ---
> drivers/mmc/host/sdhci-pci-core.c | 4 +
> drivers/mmc/host/sdhci-pci-o2micro.c | 154 ++++++++++++++++++++-------
> drivers/mmc/host/sdhci-pci.h | 4 +
> 3 files changed, 126 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index 01975d145200..1d14300691f4 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -1898,6 +1898,10 @@ static const struct pci_device_id pci_ids[] = {
> SDHCI_PCI_DEVICE(O2, SDS1, o2),
> SDHCI_PCI_DEVICE(O2, SEABIRD0, o2),
> SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
> + SDHCI_PCI_DEVICE(O2, GG8_9860, o2),
> + SDHCI_PCI_DEVICE(O2, GG8_9861, o2),
> + SDHCI_PCI_DEVICE(O2, GG8_9862, o2),
> + SDHCI_PCI_DEVICE(O2, GG8_9863, o2),
> SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
> SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
> SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> index 620f52ad9667..8243a63b3c81 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -36,6 +36,7 @@
> #define O2_SD_INF_MOD 0xF1
> #define O2_SD_MISC_CTRL4 0xFC
> #define O2_SD_MISC_CTRL 0x1C0
> +#define O2_SD_EXP_INT_REG 0x1E0
> #define O2_SD_PWR_FORCE_L0 0x0002
> #define O2_SD_TUNING_CTRL 0x300
> #define O2_SD_PLL_SETTING 0x304
> @@ -49,6 +50,9 @@
> #define O2_SD_UHS2_L1_CTRL 0x35C
> #define O2_SD_FUNC_REG3 0x3E0
> #define O2_SD_FUNC_REG4 0x3E4
> +#define O2_SD_PARA_SET_REG1 0x444
> +#define O2_SD_VDDX_CTRL_REG 0x508
> +#define O2_SD_GPIO_CTRL_REG1 0x510

Values do not align with the ones above

> #define O2_SD_LED_ENABLE BIT(6)
> #define O2_SD_FREG0_LEDOFF BIT(13)
> #define O2_SD_SEL_DLL BIT(16)
> @@ -334,33 +338,45 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
> scratch |= O2_SD_PWR_FORCE_L0;
> sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
>
> - /* Stop clk */
> - reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> - reg_val &= ~SDHCI_CLOCK_CARD_EN;
> - sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
> -
> - if ((host->timing == MMC_TIMING_MMC_HS200) ||
> - (host->timing == MMC_TIMING_UHS_SDR104)) {
> - /* UnLock WP */
> - pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
> - scratch_8 &= 0x7f;
> - pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
> -
> - /* Set pcr 0x354[16] to choose dll clock, and set the default phase */
> - pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &reg_val);
> - reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
> - reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE);
> - pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val);
> + /* Update output phase */
> + switch (chip->pdev->device) {
> + case PCI_DEVICE_ID_O2_SDS0:
> + case PCI_DEVICE_ID_O2_SEABIRD0:
> + case PCI_DEVICE_ID_O2_SEABIRD1:
> + case PCI_DEVICE_ID_O2_SDS1:
> + case PCI_DEVICE_ID_O2_FUJIN2:
> + /* Stop clk */
> + reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> + reg_val &= ~SDHCI_CLOCK_CARD_EN;
> + sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
> +
> + if ((host->timing == MMC_TIMING_MMC_HS200) ||
> + (host->timing == MMC_TIMING_UHS_SDR104)) {

There are unecessary parentheses here and elsewhere.
Have a look at the output of checkpatch.pl --strict

There are "Alignment should match open parenthesis"
messages also

> + /* UnLock WP */
> + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
> + scratch_8 &= 0x7f;
> + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
> +
> + /* Set pcr 0x354[16] to choose dll clock, and set the default phase */
> + pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &reg_val);
> + reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
> + reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE);
> + pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val);
> +
> + /* Lock WP */
> + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
> + scratch_8 |= 0x80;
> + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
> + }
>
> - /* Lock WP */
> - pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
> - scratch_8 |= 0x80;
> - pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
> + /* Start clk */
> + reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> + reg_val |= SDHCI_CLOCK_CARD_EN;
> + sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
> + break;
> + default:
> + break;
> }
> - /* Start clk */
> - reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> - reg_val |= SDHCI_CLOCK_CARD_EN;
> - sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
>
> /* wait DLL lock, timeout value 5ms */
> if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
> @@ -563,6 +579,7 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
> u16 clk;
> u8 scratch;
> u32 scratch_32;
> + u32 dmdn_208m, dmdn_200m;
> struct sdhci_pci_slot *slot = sdhci_priv(host);
> struct sdhci_pci_chip *chip = slot->chip;
>
> @@ -578,16 +595,27 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
> scratch &= 0x7f;
> pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
>
> + if ((chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9860) ||
> + (chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9861) ||
> + (chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9862) ||
> + (chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9863)) {
> + dmdn_208m = 0x2c500000;
> + dmdn_200m = 0x25200000;
> + } else {
> + dmdn_208m = 0x2c280000;
> + dmdn_200m = 0x25100000;
> + }
> +
> if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
> pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
>
> - if ((scratch_32 & 0xFFFF0000) != 0x2c280000)
> - o2_pci_set_baseclk(chip, 0x2c280000);
> + if ((scratch_32 & 0xFFFF0000) != dmdn_208m)
> + o2_pci_set_baseclk(chip, dmdn_208m);
> } else {
> pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
>
> - if ((scratch_32 & 0xFFFF0000) != 0x25100000)
> - o2_pci_set_baseclk(chip, 0x25100000);
> + if ((scratch_32 & 0xFFFF0000) != dmdn_200m)
> + o2_pci_set_baseclk(chip, dmdn_200m);
> }
>
> pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
> @@ -624,6 +652,11 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
> if (caps & SDHCI_CAN_DO_8BIT)
> host->mmc->caps |= MMC_CAP_8_BIT_DATA;
>
> + host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50;
> +
> + sdhci_pci_o2_enable_msi(chip, host);
> +
> + host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;
> switch (chip->pdev->device) {
> case PCI_DEVICE_ID_O2_SDS0:
> case PCI_DEVICE_ID_O2_SEABIRD0:
> @@ -634,10 +667,6 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
> if (reg & 0x1)
> host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
>
> - host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50;
> -
> - sdhci_pci_o2_enable_msi(chip, host);
> -
> if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) {
> ret = pci_read_config_dword(chip->pdev,
> O2_SD_MISC_SETTING, &reg);
> @@ -663,15 +692,21 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
> host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> }
>
> - host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;
> -
> if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
> break;
> /* set dll watch dog timer */
> reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
> reg |= (1 << 12);
> sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
> -
> + break;
> + case PCI_DEVICE_ID_O2_GG8_9860:
> + case PCI_DEVICE_ID_O2_GG8_9861:
> + case PCI_DEVICE_ID_O2_GG8_9862:
> + case PCI_DEVICE_ID_O2_GG8_9863:
> + host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> + host->mmc->caps |= MMC_CAP_HW_RESET;
> + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> + slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
> break;
> default:
> break;
> @@ -684,6 +719,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
> {
> int ret;
> u8 scratch;
> + u16 scratch16;
> u32 scratch_32;
>
> switch (chip->pdev->device) {
> @@ -885,6 +921,52 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
> scratch_32 |= 0x00180000;
> pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL2, scratch_32);
> pci_write_config_dword(chip->pdev, O2_SD_DETECT_SETTING, 1);
> + /* Lock WP */
> + ret = pci_read_config_byte(chip->pdev,
> + O2_SD_LOCK_WP, &scratch);
> + if (ret)
> + return ret;
> + scratch |= 0x80;
> + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
> + break;
> + case PCI_DEVICE_ID_O2_GG8_9860:
> + case PCI_DEVICE_ID_O2_GG8_9861:
> + case PCI_DEVICE_ID_O2_GG8_9862:
> + case PCI_DEVICE_ID_O2_GG8_9863:
> + /* UnLock WP */
> + ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
> + if (ret)
> + return ret;
> + scratch &= 0x7f;
> + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
> +
> + /* Select mode switch source as software control */
> + pci_read_config_word(chip->pdev,
> + O2_SD_PARA_SET_REG1, &scratch16);

Line break is not needed above and in similar cases below.
Wrapping at 100 columns instead of 80 is OK.

> + scratch16 &= 0xF8FF;
> + scratch16 |= BIT(9);
> + pci_write_config_word(chip->pdev,
> + O2_SD_PARA_SET_REG1, scratch16);
> +
> + /* set VDD1 supply source */
> + pci_read_config_word(chip->pdev,
> + O2_SD_VDDX_CTRL_REG, &scratch16);
> + scratch16 &= 0xFFE3;
> + scratch16 |= BIT(3);
> + pci_write_config_word(chip->pdev,
> + O2_SD_VDDX_CTRL_REG, scratch16);
> +
> + /* Set host drive strength*/
> + scratch16 = 0x0025;
> + pci_write_config_word(chip->pdev,
> + O2_SD_PLL_SETTING, scratch16);
> +
> + /* Set output delay*/
> + pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
> + scratch_32 &= 0xFF0FFF00;
> + scratch_32 |= 0x00B0003B;
> + pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
> +
> /* Lock WP */
> ret = pci_read_config_byte(chip->pdev,
> O2_SD_LOCK_WP, &scratch);
> diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
> index 3661a224fb04..d680a030f3bf 100644
> --- a/drivers/mmc/host/sdhci-pci.h
> +++ b/drivers/mmc/host/sdhci-pci.h
> @@ -11,6 +11,10 @@
> #define PCI_DEVICE_ID_O2_FUJIN2 0x8520
> #define PCI_DEVICE_ID_O2_SEABIRD0 0x8620
> #define PCI_DEVICE_ID_O2_SEABIRD1 0x8621
> +#define PCI_DEVICE_ID_O2_GG8_9860 0x9860
> +#define PCI_DEVICE_ID_O2_GG8_9861 0x9861
> +#define PCI_DEVICE_ID_O2_GG8_9862 0x9862
> +#define PCI_DEVICE_ID_O2_GG8_9863 0x9863
>
> #define PCI_DEVICE_ID_INTEL_PCH_SDIO0 0x8809
> #define PCI_DEVICE_ID_INTEL_PCH_SDIO1 0x880a
>
> base-commit: 9e87b63ed37e202c77aa17d4112da6ae0c7c097c

Next message: Miquel Raynal: "Re: [PATCH 10/12] mtd: rawnand: brcmnand: Add BCMBCA read data bus interface"
Previous message: Meenakshi Aggarwal: "RE: [PATCH 0/5] Remove CRYPTO_ALG_ALLOCATES_MEMORY flag"
In reply to: Chevron Li (WH): "RE: [PATCH V1 1/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support"
Next in thread: Adrian Hunter: "Re: [PATCH V1 1/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]