[PATCH net-next 1/2] i40e: Add helper for VF inited state check with timeout

[Ivan Vecera]

Move the check for VF inited state (with optional up-to 300ms
timeout to separate helper i40e_check_vf_init_timeout() that
will be used in the following commit.

Tested-by: Ma Yuying <yuma@xxxxxxxxxx>
Signed-off-by: Ivan Vecera <ivecera@xxxxxxxxxx>
---
 .../ethernet/intel/i40e/i40e_virtchnl_pf.c    | 47 ++++++++++++-------
 1 file changed, 31 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index be59ba3774e1..b84b6b675fa7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -4304,6 +4304,36 @@ static int i40e_validate_vf(struct i40e_pf *pf, int vf_id)
 	return ret;
 }
 
+/**
+ * i40e_check_vf_init_timeout
+ * @vf: the virtual function
+ *
+ * Check that the VF's initialization was successfully done and if not
+ * wait up to 300ms for its finish.
+ *
+ * Returns true when VF is initialized, false on timeout
+ **/
+static bool i40e_check_vf_init_timeout(struct i40e_vf *vf)
+{
+	int i;
+
+	/* When the VF is resetting wait until it is done.
+	 * It can take up to 200 milliseconds, but wait for
+	 * up to 300 milliseconds to be safe.
+	 */
+	for (i = 0; i < 15; i++) {
+		if (test_bit(I40E_VF_STATE_INIT, &vf->vf_states))
+			return true;
+
+		msleep(20);
+	}
+
+	dev_err(&vf->pf->pdev->dev, "VF %d still in reset. Try again.\n",
+		vf->vf_id);
+
+	return false;
+}
+
 /**
  * i40e_ndo_set_vf_mac
  * @netdev: network interface device structure
@@ -4322,7 +4352,6 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 	int ret = 0;
 	struct hlist_node *h;
 	int bkt;
-	u8 i;
 
 	if (test_and_set_bit(__I40E_VIRTCHNL_OP_PENDING, pf->state)) {
 		dev_warn(&pf->pdev->dev, "Unable to configure VFs, other operation is pending.\n");
@@ -4335,21 +4364,7 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 		goto error_param;
 
 	vf = &pf->vf[vf_id];
-
-	/* When the VF is resetting wait until it is done.
-	 * It can take up to 200 milliseconds,
-	 * but wait for up to 300 milliseconds to be safe.
-	 * Acquire the VSI pointer only after the VF has been
-	 * properly initialized.
-	 */
-	for (i = 0; i < 15; i++) {
-		if (test_bit(I40E_VF_STATE_INIT, &vf->vf_states))
-			break;
-		msleep(20);
-	}
-	if (!test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) {
-		dev_err(&pf->pdev->dev, "VF %d still in reset. Try again.\n",
-			vf_id);
+	if (!i40e_check_vf_init_timeout(vf)) {
 		ret = -EAGAIN;
 		goto error_param;
 	}
-- 
2.39.3