[PATCH] ASoC: dt-bindings: cirrus,cs35l45: drop unneeded quotes

[Krzysztof Kozlowski]

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 .../devicetree/bindings/sound/cirrus,cs35l45.yaml      | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
index 2ab74f995685..4c9acb8d4c4c 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
@@ -62,7 +62,7 @@ patternProperties:
           GPIO pin direction. Valid only when 'gpio-ctrl' is 1
             0 = Output
             1 = Input
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 1
@@ -71,7 +71,7 @@ patternProperties:
           GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
             0 = Low
             1 = High
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 0
@@ -80,7 +80,7 @@ patternProperties:
           GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
             0 = CMOS
             1 = Open Drain
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 0
@@ -90,7 +90,7 @@ patternProperties:
           and 'gpio-dir' is 0
             0 = Non-inverted, Active High
             1 = Inverted, Active Low
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1
         default: 0
@@ -114,7 +114,7 @@ patternProperties:
             0 = High impedance input
             1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
             2-7 = Reserved
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 7
         default: 0
-- 
2.34.1