[PATCH v3 10/11] drm/mediatek: gamma: Make sure relay mode is disabled

[AngeloGioacchino Del Regno]

Disable relay mode at the end of LUT programming to make sure that the
processed image goes through.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
 drivers/gpu/drm/mediatek/mtk_disp_gamma.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
index c8ccc38c5170..450da7062db4 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
@@ -20,6 +20,7 @@
 #define DISP_GAMMA_EN				0x0000
 #define GAMMA_EN					BIT(0)
 #define DISP_GAMMA_CFG				0x0020
+#define GAMMA_RELAY_MODE				BIT(0)
 #define GAMMA_LUT_EN					BIT(1)
 #define GAMMA_DITHERING					BIT(2)
 #define DISP_GAMMA_SIZE				0x0030
@@ -184,6 +185,9 @@ void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crt
 	/* Enable the gamma table */
 	cfg_val |= FIELD_PREP(GAMMA_LUT_EN, 1);
 
+	/* Disable RELAY mode to pass the processed image */
+	cfg_val &= ~GAMMA_RELAY_MODE;
+
 	writel(cfg_val, regs + DISP_GAMMA_CFG);
 }
 
-- 
2.40.1