[PATCH 2/2] net: dsa: b53: mdio: add support for BCM53134
From: Álvaro Fernández Rojas
Date: Thu Mar 23 2023 - 08:19:31 EST
From: Paul Geurts <paul.geurts@xxxxxxxxxxxxxxxxxxxxxxxxx>
Add support for the BCM53134 Ethernet switch in the existing b53 dsa driver.
BCM53134 is very similar to the BCM58XX series.
Signed-off-by: Paul Geurts <paul.geurts@xxxxxxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
---
drivers/net/dsa/b53/b53_common.c | 53 +++++++++++++++++++++++++++++++-
drivers/net/dsa/b53/b53_mdio.c | 5 ++-
drivers/net/dsa/b53/b53_priv.h | 9 +++++-
3 files changed, 64 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 1f9b251a5452..aaa0813e6f59 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1282,6 +1282,42 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
if (is63xx(dev) && port >= B53_63XX_RGMII0)
b53_adjust_63xx_rgmii(ds, port, phydev->interface);
+ if (is53134(dev) && phy_interface_is_rgmii(phydev)) {
+ if (port == dev->imp_port)
+ off = B53_RGMII_CTRL_IMP;
+ else
+ off = B53_RGMII_CTRL_P(port);
+
+ /* Configure the port RGMII clock delay by DLL disabled and
+ * tx_clk aligned timing (restoring to reset defaults)
+ */
+ b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
+ rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
+
+ /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
+ * sure that we enable the port TX clock internal delay to
+ * account for this internal delay that is inserted, otherwise
+ * the switch won't be able to receive correctly.
+ *
+ * PHY_INTERFACE_MODE_RGMII means that we are not introducing
+ * any delay neither on transmission nor reception, so the
+ * BCM53134 must also be configured accordingly to account for
+ * the lack of delay and introduce
+ *
+ * The BCM53134 switch has its RX clock and TX clock control
+ * swapped, hence the reason why we modify the TX clock path in
+ * the "RGMII" case
+ */
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+ rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
+ b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
+
+ dev_info(ds->dev, "Configured port %d for %s\n", port,
+ phy_modes(phydev->interface));
+ }
+
if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
if (port == dev->imp_port)
off = B53_RGMII_CTRL_IMP;
@@ -2613,6 +2649,20 @@ static const struct b53_chip_data b53_switch_chips[] = {
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
+ {
+ .chip_id = BCM53134_DEVICE_ID,
+ .dev_name = "BCM53134",
+ .vlans = 4096,
+ .enabled_ports = 0x12f,
+ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
};
static int b53_switch_init(struct b53_device *dev)
@@ -2671,7 +2721,7 @@ static int b53_switch_init(struct b53_device *dev)
dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
/* Include non standard CPU port built-in PHYs to be probed */
- if (is539x(dev) || is531x5(dev)) {
+ if (is539x(dev) || is531x5(dev) || is53134(dev)) {
for (i = 0; i < dev->num_ports; i++) {
if (!(dev->ds->phys_mii_mask & BIT(i)) &&
!b53_possible_cpu_port(dev->ds, i))
@@ -2790,6 +2840,7 @@ int b53_switch_detect(struct b53_device *dev)
case BCM53012_DEVICE_ID:
case BCM53018_DEVICE_ID:
case BCM53019_DEVICE_ID:
+ case BCM53134_DEVICE_ID:
dev->chip_id = id32;
break;
default:
diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c
index 6ddc03b58b28..8b422b298cd5 100644
--- a/drivers/net/dsa/b53/b53_mdio.c
+++ b/drivers/net/dsa/b53/b53_mdio.c
@@ -286,6 +286,7 @@ static const struct b53_io_ops b53_mdio_ops = {
#define B53_BRCM_OUI_2 0x03625c00
#define B53_BRCM_OUI_3 0x00406000
#define B53_BRCM_OUI_4 0x01410c00
+#define B53_BRCM_OUI_5 0xae025000
static int b53_mdio_probe(struct mdio_device *mdiodev)
{
@@ -313,7 +314,8 @@ static int b53_mdio_probe(struct mdio_device *mdiodev)
if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 &&
(phy_id & 0xfffffc00) != B53_BRCM_OUI_2 &&
(phy_id & 0xfffffc00) != B53_BRCM_OUI_3 &&
- (phy_id & 0xfffffc00) != B53_BRCM_OUI_4) {
+ (phy_id & 0xfffffc00) != B53_BRCM_OUI_4 &&
+ (phy_id & 0xfffffc00) != B53_BRCM_OUI_5) {
dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id);
return -ENODEV;
}
@@ -375,6 +377,7 @@ static const struct of_device_id b53_of_match[] = {
{ .compatible = "brcm,bcm53115" },
{ .compatible = "brcm,bcm53125" },
{ .compatible = "brcm,bcm53128" },
+ { .compatible = "brcm,bcm53134" },
{ .compatible = "brcm,bcm5365" },
{ .compatible = "brcm,bcm5389" },
{ .compatible = "brcm,bcm5395" },
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index a689a6950189..7888be1fd23f 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -80,6 +80,7 @@ enum {
BCM583XX_DEVICE_ID = 0x58300,
BCM7445_DEVICE_ID = 0x7445,
BCM7278_DEVICE_ID = 0x7278,
+ BCM53134_DEVICE_ID = 0x5075,
};
struct b53_pcs {
@@ -215,7 +216,13 @@ static inline int is58xx(struct b53_device *dev)
return dev->chip_id == BCM58XX_DEVICE_ID ||
dev->chip_id == BCM583XX_DEVICE_ID ||
dev->chip_id == BCM7445_DEVICE_ID ||
- dev->chip_id == BCM7278_DEVICE_ID;
+ dev->chip_id == BCM7278_DEVICE_ID ||
+ dev->chip_id == BCM53134_DEVICE_ID;
+}
+
+static inline int is53134(struct b53_device *dev)
+{
+ return dev->chip_id == BCM53134_DEVICE_ID;
}
#define B53_63XX_RGMII0 4
--
2.30.2