Re: [PATCH v2 7/8] dt-bindings: mfd: max77658: Add ADI MAX77658

[Krzysztof Kozlowski]

On 22/03/2023 06:56, Zeynep Arslanbenzer wrote:
> Add ADI MAX77658 devicetree document.
> 
> Signed-off-by: Nurettin Bolucu <Nurettin.Bolucu@xxxxxxxxxx>
> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/adi,max77658.yaml | 199 ++++++++++++++++++
>  1 file changed, 199 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/adi,max77658.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/adi,max77658.yaml b/Documentation/devicetree/bindings/mfd/adi,max77658.yaml
> new file mode 100644
> index 000000000000..6edb59e8f446
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/adi,max77658.yaml
> @@ -0,0 +1,199 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/adi,max77658.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MAX77643/MAX77654/MAX77658/MAX77659 PMIC from ADI
> +
> +maintainers:
> +  - Nurettin Bolucu <Nurettin.Bolucu@xxxxxxxxxx>
> +  - Zeynep Arslanbenzer <Zeynep.Arslanbenzer@xxxxxxxxxx>
> +
> +description: |
> +  MAX77643, MAX77654, MAX77658 and MAX77659 devices are a family of ADI PMICs
> +  providing battery charging and power supply solutions for
> +  low-power applications.
> +
> +  MAX77643 is a Power Management IC with 1 LDO regulator.
> +
> +  MAX77654 is a Power Management IC with 2 LDO regulators and 1 charger.
> +
> +  MAX77658 is a Power Management IC with 2 LDO regulators, 1 charger
> +  and 1 fuel gauge.
> +
> +  MAX77659 is a Power Management IC with 1 LDO regulator and 1 charger.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,max77643
> +      - adi,max77654
> +      - adi,max77658
> +      - adi,max77659
> +
> +  reg:
> +    description: I2C address of the PMIC
> +    items:
> +      - enum: [0x40, 0x48]
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  charger:
> +    $ref: /schemas/power/supply/adi,max77658-charger.yaml
> +
> +  fuel-gauge:
> +    $ref: /schemas/power/supply/adi,max77658-battery.yaml
> +
> +  regulators:
> +    $ref: /schemas/regulator/adi,max77658-regulator.yaml
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - adi,max77643
> +              - adi,max77654
> +              - adi,max77658
> +
> +    then:
> +      properties:
> +        reg:
> +          items:
> +            - const: 0x48
> +
> +    else:
> +      properties:
> +        reg:
> +          items:
> +            - const: 0x40
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    battery: battery-cell {
> +      compatible = "simple-battery";
> +      alert-celsius = <0 100>;
> +      constant-charge-current-max-microamp = <15000>;
> +    };
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      pmic@48 {
> +        compatible = "adi,max77643";
> +        reg = <0x48>;
> +        interrupt-parent = <&gpio>;
> +        interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
> +        regulators {
> +          LDO0 {
> +            regulator-boot-on;
> +            regulator-always-on;
> +          };
> +        };
> +      };
> +    };

Four examples is too much. Keep only some relevant one or two.

Best regards,
Krzysztof