Re: [PATCH v3 1/2] check-uapi: Introduce check-uapi.sh

[John Moon]

On 3/21/2023 2:19 PM, Masahiro Yamada wrote:

> I think I pointed out that not all UAPI headers are checked-in.
>
>
> I applied the following.
> This will remove <asm/termios.h>.
> So, definitely it is a UAPI breakage, but check_all=true
> mode succeeds.
>
>
>   diff --git a/include/uapi/asm-generic/Kbuild b/include/uapi/asm-generic/Kbuild
>   index ebb180aac74e..a9c88b0a8b3b 100644
>   --- a/include/uapi/asm-generic/Kbuild
>   +++ b/include/uapi/asm-generic/Kbuild
>   @@ -31,6 +31,6 @@ mandatory-y += stat.h
>    mandatory-y += statfs.h
>    mandatory-y += swab.h
>    mandatory-y += termbits.h
>   -mandatory-y += termios.h
>   +#mandatory-y += termios.h
>    mandatory-y += types.h
>    mandatory-y += unistd.h
>
>
>
>
> Another false positive is a change outside the uapi directories.
>
> For x86, syscall UAPI headers are generated in
> arch/x86/entry/syscalls/.
>
>
> You never know the compatibility of UAPI unless you check
> all the headers that 'make headers_install' results in.

Excellent points. We'll make another pass looking exclusively at the 
"make headers_install" trees for the two refs. That should be more 
reliable, require less code, and catch issues like these.

> I am reluctant to read the whole code,
> but I spotted possible bugs.
>
>
>
>
>
> > +
> > +readonly SUCCESS=0
> > +readonly FAIL_ABI=1
> > +readonly FAIL_PREREQ=2
> > +readonly FAIL_COMPILE=3
> > +readonly FAIL_ARCH=4
> > +readonly FAIL=5
> > +
> > +# Print to stderr
> > +eprintf() {
> > +       # shellcheck disable=SC2059
> > +       printf "$@" >&2
> > +}
> > +
> > +# Print list of UAPI files to operate on
> > +get_uapi_files() {
> > +       local -r check_all="$1"
> > +       local -r base_ref="$2"
> > +       local -r ref="$3"
>
> local -r past_ref="$3"
>
>
>
> > +       local -r file_list="${tmp_dir}/file_list.txt"
> > +
> > +       # Return already-processed list if it's available
> > +       if [ -s "$file_list" ]; then
> > +               cat "$file_list"
> > +               return 0
> > +       fi
> > +
> > +       if [ "$check_all" = "true" ]; then
> > +               # Print all of the UAPI header files at the commit in question
> > +               # Ignore the headers that we can't test.
> > +               # shellcheck disable=SC2086,SC2046
> > +               git ls-tree --full-tree --name-only -r "${base_ref:-HEAD}" -- "${UAPI_DIRS[@]}" \
> > +                       | grep '.h$' \
> > +                       | sed -e 's/^/M\t/g' \
> > +                       | grep -v $({ get_no_header_list "$base_ref"; get_no_export_list; } | xargs -- printf '-e %s ') \
> > +                       > "$file_list"
> > +       else
> > +               if [ -z "$base_ref" ] || [ -z "$ref" ]; then
>
>
> [ -z "$ref" ] is always false.
>
>
>
> > +                       # shellcheck disable=SC2086
> > +                       git diff $GIT_ARGS > "$file_list"
>
>
> This is a bug.
>
> Think about this situation:
>
>    $base_ref is empty, i.e. workspace
>    $ref is not HEAD but a commit in the past.
>
>
> "git diff" will return the diff
> between the cache and the workspace.
>
>
>
>
>
>
> > +               else
> > +                       # shellcheck disable=SC2086
> > +                       git diff "$ref" "$base_ref" $GIT_ARGS > "$file_list"
> > +               fi
>
>
> Do you need this if...else...fi block in the first place?
>
>
>     git diff $ref $base_ref $GIT_ARGS > "$file_list"
>
>
> will naturally work correctly for all cases.
> (do not quote $base_ref, which might be empty)

Great suggestion, that's far more elegant. Thank you!

> > +
> > +               if mismatch_arch_files=$(grep -v "arch/${ARCH}" "$file_list" | grep -o "arch/.*\.h"); then
> > +                       eprintf "warning - detected changes to following files, but can't check them with %s compiler:\n" "$ARCH"
> > +                       for f in $mismatch_arch_files; do
> > +                               eprintf "  - %s\n" "$f"
> > +                               sed -i -e "\|${f}|d" "$file_list"
> > +                               printf "warning - could not perform ABI check on %s with %s compiler\n" "$f" "$ARCH" \
> > +                                       >> "${tmp_dir}/arch_mismatches.error"
> > +                       done
> > +                       eprintf "\nFiltering them out and performing partial check on remaining files...\n"
> > +                       if [ ! -s "$file_list" ]; then
> > +                               eprintf "error - all files were filtered out, there's nothing to check!\n"
> > +                               exit "$FAIL_ARCH"
> > +                       fi
> > +               fi
> > +       fi
> > +
> > +       if [ ! -s "$file_list" ]; then
> > +               return 1
> > +       fi
> > +
> > +       cat "$file_list"
> > +}
> > +
> > +# Compile the simple test app
> > +do_compile() {
> > +       local -r inc_dir="$1"
> > +       local -r header="$2"
> > +       local -r out="$3"
> > +       printf "int main(void) { return 0; }\n" | \
> > +               "$CC" -c \
> > +                 -o "$out" \
> > +                 -x c \
> > +                 -O0 \
> > +                 -std=c90 \
> > +                 -fno-eliminate-unused-debug-types \
> > +                 -g \
> > +                 "-I${inc_dir}" \
> > +                 -include "$header" \
> > +                 -
> > +}
> > +
> > +# Print the list of incompatible headers
> > +get_no_header_list() {
> > +       local -r ref="${1:-HEAD}"
> > +       # Start with the usr/include/Makefile to get a list of the headers
> > +       # that don't compile using this method.
> > +       {
> > +               # shellcheck disable=SC2016
> > +               printf 'all: ; @echo $(no-header-test)\n'
> > +               cat "usr/include/Makefile"
> > +       } | SRCARCH="$ARCH" make -f - | tr " " "\n" | grep -v "asm-generic"
> > +
> > +       # The makefile also skips all asm-generic files, but prints "asm-generic/%"
> > +       # which won't match the files in this script, so just print all the asm-generic
> > +       # headers manually.
> > +       git ls-tree --full-tree --name-only -r "$ref" -- include/uapi/asm-generic \
> > +               | grep '.h$' \
> > +               | cut -d '/' -f 2-
> > +
> > +       # Finally, print all the architecture-specific headers that are _not_ for the
> > +       # ARCH we're targeting
> > +       git ls-tree --full-tree --name-only -r "$ref" -- arch/*/include/uapi \
> > +               | grep '.h$' \
> > +               | grep -v "^arch/${ARCH}"
> > +}
> > +
> > +# Print the list of headers that are not exported for this architecture
> > +get_no_export_list() {
> > +       {
> > +               # shellcheck disable=SC2016
> > +               printf 'all: ; @echo $(no-export-headers)\n'
> > +               cat "include/uapi/Kbuild"
> > +       } | SRCARCH="$ARCH" srctree="$KERNEL_SRC" make -f - | tr " " "\n" | sed '/^[[:space:]]*$/d'
> > +}
> > +
> > +# Save the current git tree state, stashing if needed
> > +save_tree_state() {
> > +       printf "Saving current tree state... "
> > +       current_ref="$(git rev-parse HEAD)"
> > +       readonly current_ref
> > +       if ! git diff-index --quiet HEAD; then
> > +               unstash="true"
> > +               git stash push --quiet
> > +       fi
> > +       printf "OK\n"
> > +}
> > +
> > +# Restore the git tree state, unstashing if needed
> > +restore_tree_state() {
> > +       if [ -z "$current_ref" ]; then
> > +               return 0
> > +       fi
> > +
> > +       printf "Restoring current tree state... "
> > +       git checkout --quiet "$current_ref"
> > +       if [ "$unstash" = "true" ]; then
> > +               git stash pop --quiet
> > +               unstash="false"
> > +       fi
> > +       printf "OK\n"
> > +}
> > +
> > +# Install headers for both git refs
> > +install_headers() {
> > +       local -r check_all="$1"
> > +       local -r base_ref="$2"
> > +       local -r ref="$3"
> > +
> > +       deviated_from_current_tree="false"
> > +       for inst_ref in "$base_ref" "$ref"; do
>
>
> Bakeshed1: personally, I would use 'ref' as an iterator.
>
>       for ref in "$base_ref" "$past_ref"; do
>
> I see overall inconsistency between ref vs past_ref.

Right, I will clean that up in v4.

> > +               if [ -n "$inst_ref" ]; then
> > +                       if [ "$deviated_from_current_tree" = "false" ]; then
> > +                               save_tree_state
> > +                               trap 'rm -rf "$tmp_dir"; restore_tree_state;' EXIT
>
>
> Bikeshed2:
> Instead of updating the trap back-and-force,
> I would create a function.
>
>
> exit_handler () {
>        if [ "$deviated_from_current_tree" = true ]; then
>                  restore_tree_state
>        fi
>
>        if [ -n "$tmp_dir" ]; then
>                  rm -rf "$tmp_dir"
>        fi
> }
>
> trap exist_handler EXIT

Good idea, will add in v4.

> > +                               deviated_from_current_tree="true"
> > +                       fi
> > +                       # This script ($0) is already loaded into memory at this point,
> > +                       # so this operation is safe
> > +                       git checkout --quiet "$(git rev-parse "$inst_ref")"
> > +               fi
> > +
> > +               printf "Installing sanitized UAPI headers from %s... " "${inst_ref:-dirty tree}"
> > +               make ARCH="$ARCH" INSTALL_HDR_PATH="${tmp_dir}/${inst_ref}/usr" headers_install > /dev/null 2>&1
>
>
> You can add -j${MAX_THREADS} for faster 'make headers_install'.

Thanks for the tip. Will add in v4.

> > +               printf "OK\n"
> > +       done
> > +
> > +       restore_tree_state
> > +       trap 'rm -rf "$tmp_dir"' EXIT
> > +}
> > +
> > +# Check file list for UAPI compatibility
> > +check_uapi_files() {
> > +       local -r check_all="$1"
> > +       local -r base_ref="$2"
> > +       local -r ref="$3"
> > +
> > +       install_headers "$check_all" "$base_ref" "$ref"
> > +
> > +       local passed=0;
> > +       local failed=0;
> > +       local -a threads=()
> > +
> > +       printf "Checking changes to UAPI headers between %s and %s\n" "$ref" "${base_ref:-dirty tree}"
> > +       while read -r status file; do
> > +               if [ "${#threads[@]}" -ge "$MAX_THREADS" ]; then
> > +                       if wait "${threads[0]}"; then
> > +                               passed=$((passed + 1))
> > +                       else
> > +                               failed=$((failed + 1))
> > +                       fi
> > +                       threads=("${threads[@]:1}")
> > +               fi
> > +
> > +               check_individual_file "$base_ref" "$ref" "$status" "$file" &
> > +               threads+=("$!")
> > +       done < <(get_uapi_files "$check_all" "$base_ref" "$ref")
> > +
> > +       for t in "${threads[@]}"; do
> > +               if wait "$t"; then
> > +                       passed=$((passed + 1))
> > +               else
> > +                       failed=$((failed + 1))
> > +               fi
> > +       done
> > +
> > +       if [ "$check_all" = "true" ]; then
> > +               scope=$(printf "UAPI headers compatible with %s" "$ARCH")
> > +       else
> > +               scope=$(printf "UAPI headers modified between %s and %s" "$ref" "${base_ref:-dirty tree}")
> > +       fi
> > +
> > +       total="$((passed + failed))"
> > +       if [ "$failed" -gt 0 ]; then
> > +               eprintf "error - %d/%d %s appear _not_ to be backwards compatible\n" "$failed" "$total" "$scope"
> > +       else
> > +               printf "All %d %s appear to be backwards compatible\n" "$total" "$scope"
> > +       fi
> > +
> > +       if [ "$check_all" = "true" ]; then
> > +               printf "Note: UAPI headers for architectures other than %s were not checked\n" "$ARCH"
> > +       fi
> > +
> > +       return "$failed"
> > +}
> > +
> > +# Print the path to a given header in the tmp_dir
> > +get_header() {
> > +       local -r ref="$1"
> > +       local -r arch="$2"
> > +       local -r base="$3"
> > +
> > +       if [ -z "$arch" ]; then
> > +               printf "%s" "${tmp_dir}/${ref}/usr/${base}"
> > +       else
> > +               printf "%s" "${tmp_dir}/${ref}/usr/$(printf "%s" "$base" | cut -d '/' -f 3-)"
> > +       fi
> > +}
> > +
> > +# Check an individual file for UAPI compatibility
> > +check_individual_file() {
> > +       local -r base_ref="$1"
> > +       local -r ref="$2"
> > +       local -r status="$3"
> > +       local -r file="$4"
> > +
> > +       local -r base=${file/uapi\//}
> > +       local -r uapi_arch="$(printf "%s" "$file" | grep -o 'arch/.*/uapi' | cut -d '/' -f 2)"
> > +       local -r base_header=$(get_header "$base_ref" "$uapi_arch" "$base")
> > +       local -r ref_header=$(get_header "$ref" "$uapi_arch" "$base")
> > +       local -r installed_base="$(printf "%s" "$base_header" | grep -o "usr/include/.*" | cut -d '/' -f 3-)"
> > +
> > +       if [ "$status" = "D" ]; then
> > +               eprintf "error - UAPI header %s was incorrectly removed\n" "$file" | tee "${base_header}.error"
> > +               return 1
> > +       fi
> > +
> > +       # shellcheck disable=SC2076
> > +       if [[ " $(get_no_header_list | xargs) " =~ " $installed_base " ]]; then
> > +               printf "warning - %s cannot be tested by this script (see usr/include/Makefile)\n" "$file" | tee "${base_header}.error"
> > +               return 1
> > +       fi
> > +
> > +       # shellcheck disable=SC2076
> > +       if [[ " $(get_no_export_list | xargs) " =~ " $installed_base " ]]; then
> > +               printf "warning - %s is not exported by the %s architecture, so cannot be tested\n" "$file" "$ARCH" | tee "${base_header}.error"
> > +               return 1
> > +       fi
> > +
> > +       for h in "$base_header" "$ref_header"; do
> > +               if [ ! -f "$h" ]; then
> > +                       eprintf "error - %s does not exist - cannot compare ABI\n" "$h" | tee "${h}.error"
> > +                       return 1
> > +               fi
> > +       done
> > +
> > +       compare_abi "$file" "$base_header" "$ref_header" "$base_ref" "$ref"
> > +}
> > +
> > +# Perform the A/B compilation and compare output ABI
> > +compare_abi() {
> > +       local -r file="$1"
> > +       local -r base_header="$2"
> > +       local -r ref_header="$3"
> > +       local -r base_ref="$4"
> > +       local -r ref="$5"
> > +       local -r log="${tmp_dir}/log/$(basename "$file").log"
> > +
> > +       mkdir -p "$(dirname "$log")"
> > +
> > +       if ! do_compile "${tmp_dir}/${base_ref}/usr/include" "$base_header" "${base_header}.bin" 2> "$log"; then
> > +               eprintf "error - couldn't compile version of UAPI header %s at %s\n" "$file" "$base_ref"
> > +               cat "$log" >&2
> > +               exit "$FAIL_COMPILE"
> > +       fi
> > +
> > +       if ! do_compile "${tmp_dir}/${ref}/usr/include" "$ref_header" "${ref_header}.bin" 2> "$log"; then
> > +               eprintf "error - couldn't compile version of UAPI header %s at %s\n" "$file" "$ref"
> > +               cat "$log" >&2
> > +               exit "$FAIL_COMPILE"
> > +       fi
> > +
> > +       "$ABIDIFF" --non-reachable-types "${ref_header}.bin" "${base_header}.bin" > "$log" && ret="$?" || ret="$?"
> > +       if [ "$ret" -eq 0 ]; then
> > +               if [ "$VERBOSE" = "true" ]; then
> > +                       printf "No ABI differences detected in %s from %s -> %s\n" "$file" "$ref" "${base_ref:-dirty tree}"
> > +               fi
> > +       else
> > +               # Bits in abidiff's return code can be used to determine the type of error
> > +               if [ $(("$ret" & 0x1)) -gt 0 ]; then
> > +                       eprintf "error - abidiff did not run properly\n"
> > +                       exit 1
> > +               fi
> > +
> > +               # If the only changes were additions (not modifications to existing APIs), then
> > +               # there's no problem. Ignore these diffs.
> > +               if grep "Unreachable types summary" "$log" | grep -q "0 removed" &&
> > +                  grep "Unreachable types summary" "$log" | grep -q "0 changed"; then
> > +                       return 0
> > +               fi
> > +               {
> > +                       printf "!!! ABI differences detected in %s from %s -> %s !!!\n\n" "$file" "$ref" "${base_ref:-dirty tree}"
> > +                       sed  -e '/summary:/d' -e '/changed type/d' -e '/^$/d' -e 's/^/  /g' "$log"
> > +
> > +                       if ! cmp "$ref_header" "$base_header" > /dev/null 2>&1; then
> > +                               printf "\nHeader file diff (after headers_install):\n"
> > +                               diff -Naur "$ref_header" "$base_header" \
> > +                                       | sed -e "s|${ref_header}|${ref}/${file}|g" \
> > +                                             -e "s|${base_header}|${base_ref:-dirty}/${file}|g"
> > +                               printf "\n"
> > +                       else
> > +                               printf "\n%s did not change between %s and %s...\n" "$file" "$ref" "${base_ref:-dirty tree}"
> > +                               printf "It's possible a change to one of the headers it includes caused this error:\n"
> > +                               grep '^#include' "$base_header"
> > +                               printf "\n"
> > +                       fi
> > +               } | tee "${base_header}.error" >&2
> > +               return 1
> > +       fi
> > +}
> > +
> > +min_version_is_satisfied() {
> > +       local -r min_version="$1"
> > +       local -r version_installed="$2"
> > +
> > +       printf "%s\n%s\n" "$min_version" "$version_installed" | sort -Vc > /dev/null 2>&1
> > +}
> > +
> > +# Make sure we have the tools we need
> > +check_deps() {
> > +       ABIDIFF="${ABIDIFF:-abidiff}"
> > +       CC="${CC:-gcc}"
> > +       ARCH="${ARCH:-$(uname -m)}"
> > +       if [ "$ARCH" = "x86_64" ]; then
> > +               ARCH="x86"
> > +       fi
> > +
> > +       local -r abidiff_min_version="1.7"
> > +       local -r libdw_min_version_if_clang="0.171"
> > +
> > +       if ! command -v "$ABIDIFF" > /dev/null 2>&1; then
> > +               eprintf "error - abidiff not found!\n"
> > +               eprintf "Please install abigail-tools version %s or greater\n" "$abidiff_min_version"
> > +               eprintf "See: https://sourceware.org/libabigail/manual/libabigail-overview.html\n";
> > +               exit "$FAIL_PREREQ"
> > +       fi
> > +
> > +       local -r abidiff_version="$("$ABIDIFF" --version | cut -d ' ' -f 2)"
> > +       if ! min_version_is_satisfied "$abidiff_min_version" "$abidiff_version"; then
> > +               eprintf "error - abidiff version too old: %s\n" "$abidiff_version"
> > +               eprintf "Please install abigail-tools version %s or greater\n" "$abidiff_min_version"
> > +               eprintf "See: https://sourceware.org/libabigail/manual/libabigail-overview.html\n";
> > +               exit "$FAIL_PREREQ"
> > +       fi
> > +
> > +       if ! command -v "$CC" > /dev/null 2>&1; then
> > +               eprintf 'error - %s not found\n' "$CC"
> > +               exit "$FAIL_PREREQ"
> > +       fi
> > +
> > +       if "$CC" --version | grep -q clang; then
> > +               local -r libdw_version="$(ldconfig -v 2>/dev/null | grep -v SKIPPED | grep -m 1 -o 'libdw-[0-9]\+.[0-9]\+' | cut -c 7-)"
> > +               if ! min_version_is_satisfied "$libdw_min_version_if_clang" "$libdw_version"; then
> > +                       eprintf "error - libdw version too old for use with clang: %s\n" "$libdw_version"
> > +                       eprintf "Please install libdw from elfutils version %s or greater\n" "$libdw_min_version_if_clang"
> > +                       eprintf "See: https://sourceware.org/elfutils/\n";
> > +                       exit "$FAIL_PREREQ"
> > +               fi
> > +       fi
> > +
> > +       if [ ! -d "arch/${ARCH}" ]; then
> > +               eprintf 'error - ARCH "%s" is not a subdirectory under arch/\n' "$ARCH"
> > +               eprintf "Please set ARCH to one of:\n%s\n" "$(find arch -maxdepth 1 -mindepth 1 -type d -printf '%f ' | fmt)"
> > +               exit "$FAIL_PREREQ"
> > +       fi
> > +}
> > +
> > +run() {
> > +       local base_ref="$1"
> > +       local -r check_all="$2"
> > +       shift 2
> > +       local -r orig_args="$*"
> > +       if [ -z "$KERNEL_SRC" ]; then
> > +               KERNEL_SRC="$(realpath "$(dirname "$0")"/..)"
> > +       fi
> > +
> > +       cd "$KERNEL_SRC"
> > +
> > +       abi_error_log="${abi_error_log:-${KERNEL_SRC}/abi_error_log.txt}"
> > +
> > +       tmp_dir=$(mktemp -d)
> > +       trap 'rm -rf "$tmp_dir"' EXIT
> > +
> > +       check_deps
> > +
> > +       # Set of UAPI directories to check by default
> > +       UAPI_DIRS=(include/uapi arch/*/include/uapi)
> > +       GIT_ARGS="--name-status --no-renames --format= --diff-filter=a -- ${UAPI_DIRS[*]/%/\/*.h}"
> > +
> > +       if ! git rev-parse --is-inside-work-tree > /dev/null 2>&1; then
> > +               eprintf "error - this script requires the kernel tree to be initialized with Git\n"
> > +               exit "$FAIL_PREREQ"
> > +       fi
> > +
> > +       # If there are no dirty UAPI files, use HEAD as base_ref
> > +       # shellcheck disable=SC2086
> > +       if [ -z "$base_ref" ] && git diff --exit-code $GIT_ARGS > /dev/null 2>&1; then
>
>
> I think this behavior is difficult to understand.
>
> I think it is clearer to do 'git diff' for the entire tree
> when you determine the base_ref.

Okay. With the model of only looking at "make headers_install" output, I 
imagine this bit will change anyway.

> > +               base_ref="HEAD"
> > +       fi
> > +
> > +       if [ -z "$past_ref" ]; then
> > +               if [ -n "$base_ref" ]; then
> > +                       past_ref="${base_ref}^1"
> > +               else
> > +                       past_ref="HEAD"
> > +               fi
> > +       fi
>
>
>
> So, past_ref is set to either ${base_ref}^1 or HEAD here.
>
>
> No quotes are needed for HEAD.
>
>     past_ref=HEAD
>
> is enough.
>
>
>
> > +
> > +       if [ -n "$past_ref" ] && ! git rev-parse --verify "$past_ref" > /dev/null 2>&1; then
>
>
> [ -n "$past_ref" ] is always true since past_ref is set to something.

Good point, must have missed this in an earlier refactor. Will fix in v4.

> > +               printf 'error - invalid git reference "%s"\n' "$past_ref"
> > +               exit "$FAIL_PREREQ"
> > +       fi
> > +
> > +       if [ -n "$base_ref" ]; then
> > +               if ! git merge-base --is-ancestor "$past_ref" "$base_ref" > /dev/null 2>&1; then
> > +                       printf 'error - "%s" is not an ancestor of base ref "%s"\n' "$past_ref" "$base_ref"
> > +                       exit "$FAIL_PREREQ"
> > +               fi
> > +       fi
> > +
> > +       if [ "$check_all" != "true" ] && ! get_uapi_files "$check_all" "$base_ref" "$past_ref" > /dev/null; then
> > +               printf "No changes to UAPI headers were applied between %s and %s\n" "$past_ref" "$base_ref"
> > +               exit "$SUCCESS"
> > +       fi
> > +
> > +       if ! check_uapi_files "$check_all" "$base_ref" "$past_ref"; then
> > +               eprintf "error - UAPI header ABI check failed\n"
> > +               {
> > +                       printf 'Generated by "%s %s" from git ref %s\n\n' "$0" "$orig_args" "$(git rev-parse "HEAD")"
> > +                       find "$tmp_dir" -type f -name '*.error' -exec cat {} +
> > +               } > "$abi_error_log"
> > +               eprintf "Failure summary saved to %s\n" "$abi_error_log"
> > +               exit "$FAIL_ABI"
> > +       fi
> > +}
> > +
> > +main() {
> > +       MAX_THREADS=$(nproc)
> > +       VERBOSE="false"
> > +       local base_ref=""
> > +       local check_all="true"
> > +       local quiet="false"
> > +       while getopts "hb:p:mj:l:qv" opt; do
> > +               case $opt in
> > +               h)
> > +                       print_usage
> > +                       exit "$SUCCESS"
> > +                       ;;
> > +               b)
> > +                       base_ref="$OPTARG"
> > +                       ;;
> > +               p)
> > +                       past_ref="$OPTARG"
> > +                       ;;
> > +               m)
> > +                       check_all="false"
> > +                       ;;
> > +               j)
> > +                       MAX_THREADS="$OPTARG"
> > +                       ;;
> > +               l)
> > +                       abi_error_log="$OPTARG"
> > +                       ;;
> > +               q)
> > +                       quiet="true"
> > +                       ;;
> > +               v)
> > +                       VERBOSE="true"
> > +                       ;;
> > +               *)
> > +                       exit "$FAIL_PREREQ"
> > +               esac
> > +       done
> > +
> > +       if [ "$quiet" = "true" ]; then
> > +               run "$base_ref" "$check_all" "$@" > /dev/null
> > +       else
> > +               run "$base_ref" "$check_all" "$@"
> > +       fi
> > +}
> > +
> > +main "$@"
> > --
> > 2.17.1
>
>
> --
> Best Regards
> Masahiro Yamada

Thanks for the review!