Re: [PATCH v2 02/15] arm64: dts: qcom: sa8775p: sort soc nodes by reg property

From: Konrad Dybcio
Date: Tue Mar 21 2023 - 15:25:01 EST

Next message: Pavel Machek: "d4: Usable with some caveats"
Previous message: Paul E. McKenney: "Re: [PATCH v3 2/2] rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale"
In reply to: Bartosz Golaszewski: "[PATCH v2 02/15] arm64: dts: qcom: sa8775p: sort soc nodes by reg property"
Next in thread: Bartosz Golaszewski: "[PATCH v2 01/15] arm64: dts: qcom: sa8775p: pad reg properties to 8 digits"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 20.03.2023 16:48, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Sort all children of the soc node by the first address in their reg
> property. This was mostly already the case but there were some nodes
> that didn't follow it so fix it now for consistency.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 394 +++++++++++++-------------
> 1 file changed, 197 insertions(+), 197 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 5aa28a3b12ae..296ba69b81ab 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -471,50 +471,6 @@ ipcc: mailbox@408000 {
> #mbox-cells = <2>;
> };
>
> - qupv3_id_1: geniqup@ac0000 {
> - compatible = "qcom,geni-se-qup";
> - reg = <0x0 0x00ac0000 0x0 0x6000>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> - clock-names = "m-ahb", "s-ahb";
> - clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> - <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> - iommus = <&apps_smmu 0x443 0x0>;
> - status = "disabled";
> -
> - uart10: serial@a8c000 {
> - compatible = "qcom,geni-uart";
> - reg = <0x0 0x00a8c000 0x0 0x4000>;
> - interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> - clock-names = "se";
> - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> - interconnect-names = "qup-core", "qup-config";
> - interconnects = <&clk_virt MASTER_QUP_CORE_1 0
> - &clk_virt SLAVE_QUP_CORE_1 0>,
> - <&gem_noc MASTER_APPSS_PROC 0
> - &config_noc SLAVE_QUP_1 0>;
> - power-domains = <&rpmhpd SA8775P_CX>;
> - operating-points-v2 = <&qup_opp_table_100mhz>;
> - status = "disabled";
> - };
> -
> - uart12: serial@a94000 {
> - compatible = "qcom,geni-uart";
> - reg = <0x0 0x00a94000 0x0 0x4000>;
> - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> - clock-names = "se";
> - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
> - interconnect-names = "qup-core", "qup-config";
> - power-domains = <&rpmhpd SA8775P_CX>;
> - status = "disabled";
> - };
> - };
> -
> qupv3_id_2: geniqup@8c0000 {
> compatible = "qcom,geni-se-qup";
> reg = <0x0 0x008c0000 0x0 0x6000>;
> @@ -585,173 +541,56 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> };
> };
>
> - intc: interrupt-controller@17a00000 {
> - compatible = "arm,gic-v3";
> - reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> - <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - #redistributor-regions = <1>;
> - redistributor-stride = <0x0 0x20000>;
> - };
> -
> - memtimer: timer@17c20000 {
> - compatible = "arm,armv7-timer-mem";
> - reg = <0x0 0x17c20000 0x0 0x1000>;
> - ranges = <0x0 0x0 0x0 0x20000000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - frame@17c21000 {
> - reg = <0x17c21000 0x1000>,
> - <0x17c22000 0x1000>;
> - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> - frame-number = <0>;
> - };
> -
> - frame@17c23000 {
> - reg = <0x17c23000 0x1000>;
> - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - frame-number = <1>;
> - status = "disabled";
> - };
> -
> - frame@17c25000 {
> - reg = <0x17c25000 0x1000>;
> - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> - frame-number = <2>;
> - status = "disabled";
> - };
> -
> - frame@17c27000 {
> - reg = <0x17c27000 0x1000>;
> - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> - frame-number = <3>;
> - status = "disabled";
> - };
> -
> - frame@17c29000 {
> - reg = <0x17c29000 0x1000>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - frame-number = <4>;
> - status = "disabled";
> - };
> + qupv3_id_1: geniqup@ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x0 0x00ac0000 0x0 0x6000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + clock-names = "m-ahb", "s-ahb";
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + iommus = <&apps_smmu 0x443 0x0>;
> + status = "disabled";
>
> - frame@17c2b000 {
> - reg = <0x17c2b000 0x1000>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - frame-number = <5>;
> + uart10: serial@a8c000 {
> + compatible = "qcom,geni-uart";
> + reg = <0x0 0x00a8c000 0x0 0x4000>;
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + interconnect-names = "qup-core", "qup-config";
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0
> + &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0
> + &config_noc SLAVE_QUP_1 0>;
> + power-domains = <&rpmhpd SA8775P_CX>;
> + operating-points-v2 = <&qup_opp_table_100mhz>;
> status = "disabled";
> };
>
> - frame@17c2d000 {
> - reg = <0x17c2d000 0x1000>;
> - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> - frame-number = <6>;
> + uart12: serial@a94000 {
> + compatible = "qcom,geni-uart";
> + reg = <0x0 0x00a94000 0x0 0x4000>;
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> + clock-names = "se";
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core", "qup-config";
> + power-domains = <&rpmhpd SA8775P_CX>;
> status = "disabled";
> };
> };
>
> - apps_rsc: rsc@18200000 {
> - compatible = "qcom,rpmh-rsc";
> - reg = <0x0 0x18200000 0x0 0x10000>,
> - <0x0 0x18210000 0x0 0x10000>,
> - <0x0 0x18220000 0x0 0x10000>;
> - reg-names = "drv-0", "drv-1", "drv-2";
> - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> - qcom,tcs-offset = <0xd00>;
> - qcom,drv-id = <2>;
> - qcom,tcs-config = <ACTIVE_TCS 2>,
> - <SLEEP_TCS 3>,
> - <WAKE_TCS 3>,
> - <CONTROL_TCS 0>;
> - label = "apps_rsc";
> -
> - apps_bcm_voter: bcm-voter {
> - compatible = "qcom,bcm-voter";
> - };
> -
> - rpmhcc: clock-controller {
> - compatible = "qcom,sa8775p-rpmh-clk";
> - #clock-cells = <1>;
> - clock-names = "xo";
> - clocks = <&xo_board_clk>;
> - };
> -
> - rpmhpd: power-controller {
> - compatible = "qcom,sa8775p-rpmhpd";
> - #power-domain-cells = <1>;
> - operating-points-v2 = <&rpmhpd_opp_table>;
> -
> - rpmhpd_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - rpmhpd_opp_ret: opp-0 {
> - opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> - };
> -
> - rpmhpd_opp_min_svs: opp-1 {
> - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> - };
> -
> - rpmhpd_opp_low_svs: opp2 {
> - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> - };
> -
> - rpmhpd_opp_svs: opp3 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> - };
> -
> - rpmhpd_opp_svs_l1: opp-4 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> - };
> -
> - rpmhpd_opp_nom: opp-5 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> - };
> -
> - rpmhpd_opp_nom_l1: opp-6 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> - };
> -
> - rpmhpd_opp_nom_l2: opp-7 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> - };
> -
> - rpmhpd_opp_turbo: opp-8 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> - };
> -
> - rpmhpd_opp_turbo_l1: opp-9 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> - };
> - };
> - };
> - };
> -
> tcsr_mutex: hwlock@1f40000 {
> compatible = "qcom,tcsr-mutex";
> reg = <0x0 0x01f40000 0x0 0x20000>;
> #hwlock-cells = <1>;
> };
>
> - cpufreq_hw: cpufreq@18591000 {
> - compatible = "qcom,sa8775p-cpufreq-epss",
> - "qcom,cpufreq-epss";
> - reg = <0x0 0x18591000 0x0 0x1000>,
> - <0x0 0x18593000 0x0 0x1000>;
> - reg-names = "freq-domain0", "freq-domain1";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> - clock-names = "xo", "alternate";
> -
> - #freq-domain-cells = <1>;
> - };
> -
> tlmm: pinctrl@f000000 {
> compatible = "qcom,sa8775p-tlmm";
> reg = <0x0 0x0f000000 0x0 0x1000000>;
> @@ -900,6 +739,167 @@ apps_smmu: iommu@15000000 {
> <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> + intc: interrupt-controller@17a00000 {
> + compatible = "arm,gic-v3";
> + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x20000>;
> + };
> +
> + memtimer: timer@17c20000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0 0x17c20000 0x0 0x1000>;
> + ranges = <0x0 0x0 0x0 0x20000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + frame@17c21000 {
> + reg = <0x17c21000 0x1000>,
> + <0x17c22000 0x1000>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <0>;
> + };
> +
> + frame@17c23000 {
> + reg = <0x17c23000 0x1000>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <1>;
> + status = "disabled";
> + };
> +
> + frame@17c25000 {
> + reg = <0x17c25000 0x1000>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <2>;
> + status = "disabled";
> + };
> +
> + frame@17c27000 {
> + reg = <0x17c27000 0x1000>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <3>;
> + status = "disabled";
> + };
> +
> + frame@17c29000 {
> + reg = <0x17c29000 0x1000>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <4>;
> + status = "disabled";
> + };
> +
> + frame@17c2b000 {
> + reg = <0x17c2b000 0x1000>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <5>;
> + status = "disabled";
> + };
> +
> + frame@17c2d000 {
> + reg = <0x17c2d000 0x1000>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + frame-number = <6>;
> + status = "disabled";
> + };
> + };
> +
> + apps_rsc: rsc@18200000 {
> + compatible = "qcom,rpmh-rsc";
> + reg = <0x0 0x18200000 0x0 0x10000>,
> + <0x0 0x18210000 0x0 0x10000>,
> + <0x0 0x18220000 0x0 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>,
> + <SLEEP_TCS 3>,
> + <WAKE_TCS 3>,
> + <CONTROL_TCS 0>;
> + label = "apps_rsc";
> +
> + apps_bcm_voter: bcm-voter {
> + compatible = "qcom,bcm-voter";
> + };
> +
> + rpmhcc: clock-controller {
> + compatible = "qcom,sa8775p-rpmh-clk";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board_clk>;
> + };
> +
> + rpmhpd: power-controller {
> + compatible = "qcom,sa8775p-rpmhpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmhpd_opp_table>;
> +
> + rpmhpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmhpd_opp_ret: opp-0 {
> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> + };
> +
> + rpmhpd_opp_min_svs: opp-1 {
> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> + };
> +
> + rpmhpd_opp_low_svs: opp2 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
> +
> + rpmhpd_opp_svs: opp3 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
> +
> + rpmhpd_opp_svs_l1: opp-4 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> + };
> +
> + rpmhpd_opp_nom: opp-5 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> + };
> +
> + rpmhpd_opp_nom_l1: opp-6 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> + };
> +
> + rpmhpd_opp_nom_l2: opp-7 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> + };
> +
> + rpmhpd_opp_turbo: opp-8 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> + };
> +
> + rpmhpd_opp_turbo_l1: opp-9 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> + };
> + };
> + };
> + };
> +
> + cpufreq_hw: cpufreq@18591000 {
> + compatible = "qcom,sa8775p-cpufreq-epss",
> + "qcom,cpufreq-epss";
> + reg = <0x0 0x18591000 0x0 0x1000>,
> + <0x0 0x18593000 0x0 0x1000>;
> + reg-names = "freq-domain0", "freq-domain1";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> + clock-names = "xo", "alternate";
> +
> + #freq-domain-cells = <1>;
> + };
> };
>
> arch_timer: timer {

Next message: Pavel Machek: "d4: Usable with some caveats"
Previous message: Paul E. McKenney: "Re: [PATCH v3 2/2] rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale"
In reply to: Bartosz Golaszewski: "[PATCH v2 02/15] arm64: dts: qcom: sa8775p: sort soc nodes by reg property"
Next in thread: Bartosz Golaszewski: "[PATCH v2 01/15] arm64: dts: qcom: sa8775p: pad reg properties to 8 digits"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]