[PATCH net 3/3] net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case

[arinc9 . unal]

From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>

Move setting the ssc_delta variable to under the PHY_INTERFACE_MODE_TRGMII
case as it's only needed when trgmii is used.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
 drivers/net/dsa/mt7530.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8831bd409a40..02410ac439b7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -441,6 +441,10 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 		break;
 	case PHY_INTERFACE_MODE_TRGMII:
 		trgint = 1;
+		if (xtal == HWTRAP_XTAL_25MHZ)
+			ssc_delta = 0x57;
+		else
+			ssc_delta = 0x87;
 		if (priv->id == ID_MT7621) {
 			/* PLL frequency: 150MHz: 1.2GBit */
 			if (xtal == HWTRAP_XTAL_40MHZ)
@@ -460,11 +464,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 		return -EINVAL;
 	}
 
-	if (xtal == HWTRAP_XTAL_25MHZ)
-		ssc_delta = 0x57;
-	else
-		ssc_delta = 0x87;
-
 	mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
 		   P6_INTF_MODE(trgint));
 
-- 
2.37.2