Re: [PATCH v2 1/2] dt-bindings: leds: aw2013: Document vddio-supply

[Krzysztof Kozlowski]

On 20/03/2023 18:55, Lin, Meng-Bo wrote:
> Some LEDs controllers are used with external pull-up for the interrupt
> line and the I2C lines, so we might need to enable a regulator to bring
> the lines into usable state.

Not a property of this device.

> Otherwise, this might cause spurious
> interrupts and reading from I2C will fail.
> 
> Document support for "vddio-supply" that is enabled by the aw2013 driver
> so that the regulator gets enabled when needed.
> 
> Signed-off-by: Lin, Meng-Bo <linmengbo0689@xxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/leds/leds-aw2013.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
> index 08f3e1cfc1b1..79b69cf1d1fe 100644
> --- a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
> +++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
> @@ -23,6 +23,11 @@ properties:
>    vcc-supply:
>      description: Regulator providing power to the "VCC" pin.
>  
> +  vddio-supply:
> +    description: |
> +      Optional regulator that provides digital I/O voltage,

NAK. I responded to your patch and you just send a v2 without explanation.

The device does not have VDDIO pin, either.

Best regards,
Krzysztof